This is topic D&D 6spd Conversion for Mods in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=052429
Posted by jayl (Member # 185) on
:
Complete T56, driveshaft , crossmember for 96-up Modular motors. This is the 2,500 dollar tranny alone. The complete kit is 3k. All parts have been in the car since May, and have less 1,000 miles on entire setup. Also have new flywheel, Centerforce DFX clutch setup and cable. Also have 03-04 Cobra shifter. Any interest let me know. Will be tearing the car down shortly.
Jason
Posted by jayl (Member # 185) on
:
bump
Posted by jayl (Member # 185) on
:
up again!
and to those that contacted, please let contact info so i can get back to you! tranny is ready to rock!
Posted by jayl (Member # 185) on
:
nobody wants a 6spd ???
UP UP UP!
Posted by BlowN67 (Member # 4229) on
:
is this an viper t56?
Posted by jayl (Member # 185) on
:
No its the 03-04 style setup. D&D says with thr larger input shaft they have been running this tranny to 900rwhp though. Pretty stout piece I would have to assume. Are you interested at all? Thanks
Jason
Posted by BlowN67 (Member # 4229) on
:
well sort of got to sell a few things first.
Posted by jayl (Member # 185) on
:
I understand comletely on that one. Just let me know. Thanks
J
Posted by cyrus510 (Member # 7230) on
:
u still have the tranny?
Posted by jayl (Member # 185) on
:
yes sir I do!
Posted by hidnn.o.s. (Member # 1219) on
:
You say 96 and up. I know it's not 05+, but what about an 01?
Also, you say conversion, Auto to manual conversion?
My x has an 01 but it's an auto. Everything included or do you know what else would be needed to convert?
Posted by jayl (Member # 185) on
:
This is definitely not an auto to manual swap. Only for a manual vehicle to begin with. I'm sure at the least you'd need the pedal assembly. But yes it will fit up to 04 as what D&D told me. Let me know if theres anything else I can answer.
Posted by BlowN67 (Member # 4229) on
:
price again
Posted by jayl (Member # 185) on
:
I'm hopin for 2300 for everything. clutch/tranny/swap parts/shifter....everything I got!
Posted by BlowN67 (Member # 4229) on
:
26 spline set up?
Posted by jayl (Member # 185) on
:
nope its the standard 03-04 style. 10 spline. all you need is the big input and this thing would be pretty damn bullet proof! let mw know if your interested. have a little room to budge if you are serious
Posted by twins (Member # 5069) on
:
will this bolt right up in my 91 drop?
Posted by jayl (Member # 185) on
:
quote:
Originally posted by twins:
will this bolt right up in my 91 drop?
the same drop i backed into this morning? might want to fix the body before you upgrade to an awesome tranny like this!! my bad!
Fueled by Ford Mustang Owners
on CaliforniaFords.com