This is topic FS OR T: 1995 COBRA 5.0 SUPERCHARGED 505 RWHP in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=052308

---

Posted by vpr_klr (Member # 3353) on :
 
Putting up my 95 Cobra up for sale or possible trade. I would like a fox hatch or a 66-67 nova 2 door hard top.

Cobra #2252 as confirmed by SVT.

First and foremost, this car has a salvage title, it was a stolen recovery vehicle, I would like to disclose that first for everybody. I will only give the VIN out to serious buyers.

Bought the car with 858xx miles, car now has 890xx miles. so you can see, i never drive it. it has never seen rain and only been washed a couple of times. Everything has 3000 miles on it or less(except chassis and drivetrain).

I bought the car in 04 as a shell. No bumper covers, no lights, no hood, no drivetrain, no suspension, no brakes, no rims, no seats. The shell basically had the fenders and the trunk(which is correct, and has the vin on it, same with fenders) and the glass, most of the interior.

I then added a Harwood Formula hood, 96/98 Cobra Front and Rear Bumper Covers, and 96/98 tail lights(which were painted gloss black). New cobra front lights along with clear corners. I then had the car painted by Campbell Auto body out of Los Angeles. It is a Vermillion red(like the lightning red) which was called "viper" red by PPG(not Dodge viper mind you). It is no longer available as I believe Chrysler sued them . Clear coat base coat. All the panels line up. I then added new cobra emblems to the sides and the grill.

The interior came with a custom built 4 point roll bar which in no way interferes with the back or front seats. The interior is black and tan with the original dash, cluster, console, door panels and c pillar panels, head liner, a-pillar panels and trim. it came with a black rear leather seat, I added 01 cobra seats(i know they don't match, but hey, they're comfy). there are no holes drilled in anything(i.e. old tach mount, hacked up dash). interior is pretty immaculate.

Now the fun stuff. Starting with my wrecked 94 cobra with 64,xxx miles, I pulled the motor, disassembled it, had everything checked by M&M machine and reassembled. compression is 165 across the board on average. I added Ford racing graphite head gaskets, arp studs, Ford Racing GT-40x(which have MINOR clean up work and new guides(factory ones are junk)), NEW crane 1.72 Roller Rockers(cobra ones), Comp Cams hardened pushrods, Comp Cams lifters, a Crane blower cam(cam will be revealed to buyer only), and ford racing "cobra" valve covers which were stripped, painted and polished to match the car, also modded to fit motor as they only fit 86-93 cars. ARP SS bolts used throughout. New holley systemax intake(1 inch spacer) with polished elbow and 75mm throttle body. New Lightning Mass Air and New Lightning 42lb. injectors.

Brand new Polished Vortech SQ-trim kit with the stock 3.33" pulley(blower still has over year left on warranty). UPR power pipe with 8" power stack AFM filter and bosch bypass valve.

Stewart high flow water pump and new Ford Radiator. New power steering pump and alternator, new smog pump. Fox body convertible mounts used to lower engine. Full Tilt MSD ignition: MSD 6A, MSD wires, MSD BILLET DIST., MSD Coil. New Ford Battery. MARCH polished pullies. MAC unequal, shorty, Ceramic coated headers, custom made 2 1/2" x pipe with high flow Magna flow cats, and 2 1/2" Dynomax Ultra flow cat back with 3 1/2"x18" SS Magna flow tips. The computer is sn95 cobra with a superchips tune from Shaun at AED.

All said, it makes 505hp @ 6500 and 455 tq @ 5500 to the wheels(I'm not kidding). Shaun and Drew can vouch for this. This is how it is, not some one time gung ho tune, very mild, safe, conservative tune. Thanks to the guys at AED!


The clutch is a king Cobra and the flywheel is stock and the shifter is PRO 5.0, with new leather cobra knob. The trans is stock Cobra T-5 with new 1, 2, 3, 4, blocker rings. Stock driveshaft and rubber mount.

The Brakes are stock Cobra, but all new stuff from ford racing front and rear. New Calipers, new rotors, new pads(FRONT AND REAR on all brake parts), new hubs, new lines, new hoses. Again, ALL FORD SHIT, not aftermarket replacement crap.

The 8.8 has been beefed up with a rebuilt trac-lok with an extra clutch pack, FRPP 3.73 gears.

Steeda front and rear sway bars, Maximum motorsport rear lower arms, FRPP uppers. UPR billet CC plates, H&R sport springs, Tokico Blue Shocks and Struts(all suspension is new, not used stuff).

18x9.5 ford 2000 Cobra r rims with custom machined centers with Hamann aluminum center caps. Dunlop sp 9000 tires, 265/35 front, 275/40 rear.

I know I'm forgetting a bunch, but this is off the top of my head, any questions, let me know.

over $18,000 invested, asking $11,500. thanks Alan.

vpr_klr@yahoo.com

Serious only please, this is not a car for first timers, it is a seriously fast street car that drives like a stocker and passes smog! I also have many extras to go along with the car.












[ December 17, 2007, 08:48 PM: Message edited by: vpr_klr ]
 

---

Posted by vpr_klr (Member # 3353) on :
 
trade for clean fox body hatchback and $$$$
 

---

Posted by N8 (Member # 6048) on :
 
damn some major clean ass cars being sold these days. Very nice car, and good luck with the sale. Good that you threw a warning out there to about the potential danger for a first timer. ttt
 

---

Posted by jmcclesk (Member # 1355) on :
 
Nice car good luck with the sale.
 

---

Posted by STREETFIGHTER50 (Member # 2973) on :
 
Damn nice car & #'s Alan!
 

---

Posted by venomous99 (Member # 1917) on :
 
man..thats a nice ass car.
 

---

Posted by Cm4hawks (Member # 5231) on :
 
pm sent
 

---

Posted by phil a (Member # 6951) on :
 
Nice car. If you sell it, I guess you'll have to kill vipers with your BMW roadster
 

---

Posted by 351R (Member # 5053) on :
 
seen this car up close.10/10
 

---

Posted by vpr_klr (Member # 3353) on :
 
thanks guys.

Yeah, i hate to see it go, would actually like to keep it, but what's the point if I never drive cuz I'm too anal about it getting f'd up. I don't drvie it on the freeway cuz of rock chips, jeez.


or I would like a 66-67 nova if someone's got one.
 

---

Posted by 2SIK GT (Member # 3381) on :
 
nice
 

---

Posted by vpr_klr (Member # 3353) on :
 
dirt bikes are nice too
 

---

Posted by vpr_klr (Member # 3353) on :
 
buy me!
 

---

Posted by vpr_klr (Member # 3353) on :
 
http://i22.photobucket.com/albums/b320/vpr_klr/bday051.jpg[/IMG]









interior pics added
 

---

Posted by vpr_klr (Member # 3353) on :
 
CRF 250 x + cash. long shot but hey, you never know.
 

---

Posted by StangSpdstr (Member # 1254) on :
 
not sure if your interested in parting out the front seats for some 97 cobra leather seats but if you are id be willing to work something out.
 

---

Posted by vpr_klr (Member # 3353) on :
 
Not looking to part it out......yet. Thanks though.

[ November 28, 2007, 08:17 PM: Message edited by: vpr_klr ]
 

---

Posted by vpr_klr (Member # 3353) on :
 
Damn joy riders!
 

---

Posted by 95331StrimVert (Member # 6250) on :
 
Dyno sheet? CAM?
 

---

Posted by vpr_klr (Member # 3353) on :
 
Cam will be disclosed to buyer only. Sorry, just me being weird about my combos.

I don't have a scanner, maybe I can get Shaun to post from his computer at AED.
 

---

Posted by 92highway (Member # 6542) on :
 
bump for a clean ass cobra good luck with the sale
 

---

Posted by vpr_klr (Member # 3353) on :
 

quote:

---

Originally posted by 92highway:
bump for a clean ass cobra good luck with the sale

---

quote:

---

Originally posted by vpr_klr:
I don't have a scanner, maybe I can get Shaun to post from his computer at AED.

---

[ December 03, 2007, 12:46 PM: Message edited by: FoX GT ]
 

---

Posted by vpr_klr (Member # 3353) on :
 

quote:

---

Originally posted by FoX GT:

quote:

---

Originally posted by vpr_klr:
I don't have a scanner, maybe I can get Shaun to post from his computer at AED.

---

---

Damn. Thanks. Much appreciated!
 

---

Posted by 95331StrimVert (Member # 6250) on :
 
Kick ass numbers. Someone should buy this car. I would if i dint have mine...


TTT
 

---

Posted by vpr_klr (Member # 3353) on :
 
Got a new bike!

Car is now dust collector.

$11,500

most likely will remove cobra seats and install stock tan leather and ask $11,000.
 

---

Posted by vpr_klr (Member # 3353) on :
 
trade for Jap 4x4 SUV + cash.
 

---

Posted by 89Rodknocker (Member # 2951) on :
 
Still looking for a hatch???????????
 

---

Posted by vpr_klr (Member # 3353) on :
 
MAYBE...
 

---

Posted by 89Rodknocker (Member # 2951) on :
 
lmk


http://videos.streetfire.net/video/00558d19-6c81-4f6d-b078-99a3000d4ff5.htm

[ January 01, 2008, 08:41 PM: Message edited by: 89Rodknocker ]
 

---

Posted by vpr_klr (Member # 3353) on :
 
HOW BOUT THAT GRAY ONE IN THE BACKGROUND?
 

---

Posted by 89Rodknocker (Member # 2951) on :
 
That one's somewhat similar to yours but not as clean. Bolt ons and the what not but needs paint. Sleeper though.
 

---

Posted by mitch (Member # 8012) on :
 

To the left

The PONY RIDE meet at Stoneridge Mall.

With the Powder Coated Ponies, and Cervini's Mach 1 hood.

PM SENT.
 

---

Posted by NIGHTMARE (Member # 7519) on :
 
how much for the stock tan leather seats?
 

---

Posted by The TASM (Member # 292) on :
 

quote:

---

Originally posted by 89Rodknocker:
lmk


http://videos.streetfire.net/video/00558d19-6c81-4f6d-b078-99a3000d4ff5.htm

---

quote:

---

Originally posted by mitch:

To the left

The PONY RIDE meet at Stoneridge Mall.

With the Powder Coated Ponies, and Cervini's Mach 1 hood.

PM SENT.

---

quote:

---

Originally posted by hidnn.o.s.:

quote:

---

Originally posted by mitch:

To the left

The PONY RIDE meet at Stoneridge Mall.

With the Powder Coated Ponies, and Cervini's Mach 1 hood.

PM SENT.

---

Is that the fox I sold you? Car looks great in the shots, how's it been for you?

---