This is topic Garage Cleaning in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=051126
Posted by BlowN67 (Member # 4229) on :
 
71 351w bare block 350firm
351w torker2 intake 125
carb 351w msd dizzy 8584 $150
carb 302 vaccum adv, msd 8479 $140
carb 302 rpm carb intake gasket match 1250 blended up by carb 160
victor sr bare heads w/t&d shaft mount rockers 50cc 1500
mac 351w 1 3/4 lt headers 225
mac 3" prochamber for shorties 160
2 holley 850 cfm carbs #9380 an #4781
new CSI electric waterpump $275obo
flowmaster 2.5 mandrel bend muffler back stainless tip $100 firm
un known brand but think their march 32v crank an water pump pullies no alt pulley $75
a351 3/8 stud mount 1.6 ratio roller rockers with poly locks
looking for $125

32v MAC headers l/t looking to get $225 for them could fit other years

(2sets)96-98 cobra heads looking to get $350ea for them complete
also got an msd dis4 set up for 32v with tach adapters I believe they go for around $275 obo (got to sets)

69 351w crank needs polishing


more to come JOHN

[ November 03, 2007, 11:39 PM: Message edited by: BlowN67 ]
 
Posted by BlowN67 (Member # 4229) on :
 
TTT
 
Posted by BlowN67 (Member # 4229) on :
 
still here

[ September 21, 2007, 01:06 AM: Message edited by: BlowN67 ]
 
Posted by BlowN67 (Member # 4229) on :
 
mac lt's pending
 
Posted by BlowN67 (Member # 4229) on :
 
TTT

[ September 21, 2007, 01:05 AM: Message edited by: BlowN67 ]
 
Posted by BlowN67 (Member # 4229) on :
 
TTT
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by DLo (Member # 6133) on :
 
Might know someone interested in the 351W. Will let you know if he is.
 
Posted by BlowN67 (Member # 4229) on :
 
kool thanx
 
Posted by BlowN67 (Member # 4229) on :
 
TTT
welds sold
one set of rockers sold
 
Posted by BlowN67 (Member # 4229) on :
 
quote:
Originally posted by BlowN67:
71 351w bare block 350firm
351w torker2 intake 125
carb 351w msd dizzy 8584 $150
carb 302 vaccum adv, msd 8479 $140
carb 302 rpm carb intake gasket match 1250 blended up by carb 160
victor sr bare heads w/t&d shaft mount rockers 50cc 1500
mac 351w 1 3/4 lt headers 225 pending
mac 3" prochamber for shorties 160
2 holley 850 cfm carbs #9380 an #4781
new CSI electric waterpump $275obo pending
svo upper/lower wing forsale $150
flowmaster 2.5 mandrel bend muffler back stainless tip $100
un known brand but think their march crank an water pump pullies no alt pulley $75
i got two sets of a351 3/8 stud mount 1.6 ratio roller rockers with poly locks
looking for $125 each set

MAC headers l/t looking to get $225 for them could fit other years

(2sets)96-98 cobra heads looking to get $350ea for them complete
also got an msd dis4 set up for 32v with tach adapters I believe they go for around $275 obo (got to sets)
96-98 cobra intake with plates an controller $375obo
69 351w crank needs polishing
testing waters 15x10 6.5bs weld drag lites w/new mt et drag radials 325/50/15

more to come JOHN

 
Posted by BlowN67 (Member # 4229) on :
 
quote:
Originally posted by BlowN67:
71 351w bare block 350firm
351w torker2 intake 125
carb 351w msd dizzy 8584 $150
carb 302 vaccum adv, msd 8479 $140
carb 302 rpm carb intake gasket match 1250 blended up by carb 160
victor sr bare heads w/t&d shaft mount rockers 50cc 1500
mac 351w 1 3/4 lt headers 225 pending
mac 3" prochamber for shorties 160
2 holley 850 cfm carbs #9380 an #4781
new CSI electric waterpump $275obo pending
svo upper/lower wing forsale $150
flowmaster 2.5 mandrel bend muffler back stainless tip $100
un known brand but think their march crank an water pump pullies no alt pulley $75
i got two sets of a351 3/8 stud mount 1.6 ratio roller rockers with poly locks
looking for $125 each set

MAC headers l/t looking to get $225 for them could fit other years

(2sets)96-98 cobra heads looking to get $350ea for them complete
also got an msd dis4 set up for 32v with tach adapters I believe they go for around $275 obo (got to sets)
96-98 cobra intake with plates an controller $375obo
69 351w crank needs polishing
testing waters 15x10 6.5bs weld drag lites w/new mt et drag radials 325/50/15

more to come JOHN

 
Posted by BlowN67 (Member # 4229) on :
 
TTT
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
ttt
 
Posted by BlowN67 (Member # 4229) on :
 
TTT
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com