This is topic F/S DSS 331 Stroker from a 94 mustang in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=049704
Posted by Adrian 01GT (Member # 1672) on
:
Guys previous sale fell through motor comes complete with everything on this picture and also everything that is listed on here
It is ready for pick up or to be shipped.
Just like the title says motor has been sitting for 8 months. I abadoned the project almost a year ago after I bought my lightning. I'm looking for $4300 picked up and $4600 shipped for the longblock that includes every thing from oil pan to intake also the accessories. Specs are as follows and motor has 17k miles on it. Worked great it put down 315rwhp NA and 550rwhp on 10lbs of boost on a Vortech
These are the specs of the block. There is additional stuff on here that I will be selling as well any questions just ask adrianr02@hotmail.com I do take paypal.
Block work:
* Ford 302 Block *stroked to 331cu in*
* 4340 Forged Billet Crank
* DSS 9.5:1 Pro-Light Forged Pistons
* DSS 4340 Forged Polished H-beam Rods w/ARP rod bolts
* E-303 FRPP Camshaft
* Billet aluminum main support
* 7-quart Canton Oil-pan w/9" deep sump
* High-flow Water Pump
* blueprinted & balanced
* ~7,000 miles since bought from DSS & installed.
Head Work:
* AFR 185cc Heads
* FRPP Lifters
* DSS Aluminum Roller Rockers
* 4130 Trickflow seamless pushrods
* ARP Head Bolts
* Fel-Pro Gaskets
* Double Roller Timing Chain
* FRPP Valve Covers
* ~17,000 miles since bought from DSS & installed.
Induction:
* Holley systeMAX Intake
* Edelbrock Throttle Body Spacer
* BBK 75mm Throttle Body
Fuel System:
* FRPP 42# Injectors
Exhaust:
* JBA Shorty Headers, included in motor.
* Bassani o/r X-pipe $100 picked up.
* Mcleod Dual disk clutch $400 shipped resurfaced only 2k miles on it.
* Mcleod Lightweight Aluminum Flywheel
* Steeda Clutch Quadrant
* D&D shortened aluminum drive-shaft
* New clutch fork
8.8 rearend
* Eaton Center Diff
* 4.10 rear-end gears
* 31-spline axles
* SVO Rearend Girdle $60 shipped
* Flaming River Steering Rack $120 shipped
* Flaming River Steering Shaft $50 shipped
* ~17,000 miles since bought from D&D & installed.
Cooling System:
* Fluidyne Radiator $280 shipped
Interior:
* Sparco Torino Front Seats faded $300 with rails
* Bullit shift knob $30 shipped
* Bullit shifter bezel $30 shipped
*
* '98 Cobra back bumper $100 picked up.
* '98 Cobra taillights sequential $80 shipped
* 35% Tint passanger and drivers doors
Horsepower:
* 315whp / 348wtq, when it was N/A
* 550whp / 550wtq, supercharged.
[ July 22, 2007, 12:03 PM: Message edited by: Adrian 01GT ]
Posted by Adrian 01GT (Member # 1672) on
:
Guys i'm not parting out this motor yet. Doesn't mean I won't in the future.
Thanks
Posted by Adrian 01GT (Member # 1672) on
:
tt
Posted by Adrian 01GT (Member # 1672) on
:
Motor is SOLD!
Posted by 06Xrunner (Member # 6992) on
:
Do you still have the rest of the parts? Did you include the headers with the engine you sold or are they still available?
Thanks!!!
Posted by 95slow50 (Member # 2804) on
:
Can you send more detailed pics of the sparco seats just to see how bad the fading is to Komokazzi20@yahoo.com ... very interested depending on the fading
[ August 01, 2007, 12:51 PM: Message edited by: 95slow50 ]
Posted by SlowFiveOh94 (Member # 2404) on
:
Please send me a picture of the Bullitt shift bezel. Is it OEM? JRNorCal85@yahoo.com
Posted by Adrian 01GT (Member # 1672) on
:
bezel is sold
Fueled by Ford Mustang Owners
on CaliforniaFords.com