This is topic F/S 331 DSS Longblock in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=049022

Posted by Adrian 01GT (Member # 1672) on :
 
Just like the title says motor has been sitting for 8 months. I abadoned the project almost a year ago after I bought my lightning. I'm looking for $4500 picked up and $4800 shipped for the longblock that includes every thing from oil pan to intake also the accessories. Specs are as follows and motor has 17k miles on it. Worked great it put down 315rwhp NA and 550rwhp on 10lbs of boost on a Vortech

These are the specs of the block. There is additional stuff on here that I will be selling as well any questions just ask adrianr02@hotmail.com I do take paypal.

Block work:
* Ford 302 Block *stroked to 331cu in*
* 4340 Forged Billet Crank
* DSS 9.5:1 Pro-Light Forged Pistons
* DSS 4340 Forged Polished H-beam Rods w/ARP rod bolts
* E-303 FRPP Camshaft
* Billet aluminum main support
* 7-quart Canton Oil-pan w/9" deep sump
* High-flow Water Pump
* blueprinted & balanced
* ~7,000 miles since bought from DSS & installed.

Head Work:
* AFR 185cc Heads
* FRPP Lifters
* DSS Aluminum Roller Rockers
* 4130 Trickflow seamless pushrods
* ARP Head Bolts
* Fel-Pro Gaskets
* Double Roller Timing Chain
* FRPP Valve Covers
* ~17,000 miles since bought from DSS & installed.
Induction:
* Holley systeMAX Intake
* Edelbrock Throttle Body Spacer
* BBK 75mm Throttle Body
* Pro-M 80mm Mass Air $80 shipped


Fuel System:
* FRPP 42# Injectors
* Walbro 255lph in-tank Fuel Pump
* 255lph in-line Fuel Pump

Exhaust:
* JBA Shorty Headers, Ceramic Coated included in motor.

* Bassani o/r X-pipe $100 picked up.
* Magnaflow Cat-back Exhaust Sold
* Mcleod Dual disk clutch $400 shipped resurfaced only 2k miles on it.
* Mcleod Lightweight Aluminum Flywheel
* Steeda Tri-ax SOLD
* Steeda Clutch Quadrant
* D&D shortened aluminum drive-shaft
* New clutch fork
* Stock 8.8
* Eaton Center Diff
* 4.10 rear-end gears
* 31-spline axles
* SVO Rearend Girdle $60 shipped
* Flaming River Steering Rack $120 shipped
* Flaming River Steering Shaft $50 shipped
* ~17,000 miles since bought from D&D & installed.

Cooling System:
* Fluidyne Radiator $280 shipped
* Hotckis Camber plates $100 shipped

Interior:
* Sparco Torino Front Seats faded $300 with rails
* Bullit shift knob $30 shipped
* Bullit shifter bezel $30 shipped
*
* '98 Cobra back bumper $100 picked up.
* '98 Cobra taillights sequential $80 shipped
* 35% Tint passanger and drivers doors

Horsepower:
* 315whp / 348wtq, when it was N/A
* 550whp / 550wtq, supercharged.

[ June 22, 2007, 01:59 PM: Message edited by: Adrian 01GT ]
 
Posted by 91Trunkster (Member # 6598) on :
 
How much for the seats?
 
Posted by kingmoochr (Member # 5834) on :
 
clutch?
 
Posted by BlowN67 (Member # 4229) on :
 
whats for sale here just motor or everything listed?
 
Posted by F8LSN8K (Member # 7080) on :
 
quote:
Originally posted by BlowN67:
whats for sale here just motor or everything listed?

+1 [Confused]
 
Posted by Blue Oval (Member # 2548) on :
 
+2 [Confused]
 
Posted by Adrian 01GT (Member # 1672) on :
 
Sorry guys Yes everything listed on here is for sale. I'll revise the list on the items that I still have available. Motor comes with all accessories from oil pan to intake just email me for questions. I'll check this every few days.

I also have a fluidyne Radiator for sale in great shabe $280 shipped.
 
Posted by BlowN67 (Member # 4229) on :
 
emailed sent. will send pm too thanx JOHN
 
Posted by Yung Than (Member # 728) on :
 
What year mustang is all this stuff out of? Are the exhaust parts for 87-93 5.0?

[ June 21, 2007, 11:03 PM: Message edited by: Yung Than ]
 
Posted by Adrian 01GT (Member # 1672) on :
 
they are from my 94 mustang.
 
Posted by kingmoochr (Member # 5834) on :
 
how many splines on the clutch disks?
 
Posted by Adrian 01GT (Member # 1672) on :
 
King let me find out it's been a while I'll pick it up from the shop today.
 
Posted by F8LSN8K (Member # 7080) on :
 
so the heads and headers were in a 94????

how much for each and/or both?
 
Posted by Adrian 01GT (Member # 1672) on :
 
yes all this is from a 94 5.0 331 stroker I used to own a 01 as well.
 
Posted by F8LSN8K (Member # 7080) on :
 
so how much for the heads and headers??? [Confused]
 
Posted by Adrian 01GT (Member # 1672) on :
 
Right now I have a sale pending for entire motor which includes the heads and headers.
 
Posted by kingmoochr (Member # 5834) on :
 
well is it a stock t5/t45?
 
Posted by Adrian 01GT (Member # 1672) on :
 
No sorry it was for a Viper spec T56 6speed not the cobra version the viper tranny
 
Posted by BlowN67 (Member # 4229) on :
 
take it u sold the tranny already?
 
Posted by Adrian 01GT (Member # 1672) on :
 
Viper tranny was is going into a Ford Falcon. Buddy of mine bought it.
 
Posted by Adrian 01GT (Member # 1672) on :
 
I am also going to sell the chasis for $500 if anyone is intersted missing parts are only rear and front bumper and front side panels.

Sparco Torino seats are faded, from material but in great shape with brackets that will fit 94-01 mustang. $400 picked up if anyone is interested.
 
Posted by F8LSN8K (Member # 7080) on :
 
quote:
Originally posted by Adrian 01GT:
Right now I have a sale pending for entire motor which includes the heads and headers.

ok
 
Posted by kingmoochr (Member # 5834) on :
 
ive got a 26 spline gforce trans, what are the clutches? and i assume the pressure plate bolts onto a ford flywheel?
 
Posted by Adrian 01GT (Member # 1672) on :
 
I believe it is a 31 spline I have to call D&D performance to verify since I purchased it from them. the Mcleod dual disk clutch. I will call them on Monday and get back to you.
 
Posted by kingmoochr (Member # 5834) on :
 
also check to see if i can use it simply by purchasing 26 spline discs for it
 
Posted by Adrian 01GT (Member # 1672) on :
 
Motor is sold rear end is pending sale.
Sparco seats are left $400 picked up. great shape but faded seats come with brackets.
Still have bullit shift bezel and bullit shifter $60 shipped.

I also have for sale the Fluidyne Radiator $280 shipped to your door.
-Flaming River steering and flaming river shaft.
$200 shipped for both.
 
Posted by BlowN67 (Member # 4229) on :
 
manual rack or power rack?
 
Posted by Adrian 01GT (Member # 1672) on :
 
power steering rack
 
Posted by phil a (Member # 6951) on :
 
I'm pretty sure there's no 31-spline input shaft on the trans, 31-spline output maybe but that does not affect clutch, look into it, most likely 26 spline
 
Posted by Adrian 01GT (Member # 1672) on :
 
I will i've been lazy and haven't called it was the T56 viper spec tranny for the 94 mustang.
I will find out when I call D&D
 
Posted by 95331StrimVert (Member # 6250) on :
 
who did your tune in Fresno? My brother is in Fresno...

[ July 21, 2007, 02:23 AM: Message edited by: 95331StrimVert ]
 
Posted by Adrian 01GT (Member # 1672) on :
 
I wouldn't recommend anyone here. I got my tune by Danny Swanson in Torrance.

[ July 22, 2007, 11:54 AM: Message edited by: Adrian 01GT ]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com