This is topic 32v cobra stuff f/s *pics now* in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=048320

---

Posted by BlowN67 (Member # 4229) on :
 
un known brand but think their march crank an water pump pullies no alt pulley $75

MAC headers l/t looking to get $225 for them could fit other years

96-98 cobra heads looking to get 450 for them complete

96-98 cobra intake with imrc plates looking to get 350 obo
also got an msd dis4 set up for 32v with tach adapters I believe they go for around $275 obo (got to sets)


[ May 25, 2007, 01:46 PM: Message edited by: BlowN67 ]
 

---

Posted by BlowN67 (Member # 4229) on :
 

 

---

Posted by BlowN67 (Member # 4229) on :
 
TTT
 

---

Posted by BlowN67 (Member # 4229) on :
 
TTT
 

---

Posted by 9cobrasnake9 (Member # 575) on :
 
how much for the dis 4?
 

---

Posted by BlowN67 (Member # 4229) on :
 

quote:

---

Originally posted by 9cobrasnake9:
how much for the dis 4?

---

$275obo
 

---

Posted by BlowN67 (Member # 4229) on :
 

 

---

Posted by Letsrunem (Member # 6305) on :
 
You want $275 for the imrc plates upper and lower intake now?
 

---

Posted by BlowN67 (Member # 4229) on :
 
will take $300
 

---

Posted by wickedstang (Member # 7692) on :
 
What do the headers fit?
 

---

Posted by BlowN67 (Member # 4229) on :
 
i got them from a 99 cobra to put onto a 96-98 cobra. so my guess is anywhere from 96-98 an 99,01 cobras. only difference on the headers that i have found out was were the egr tube sits. can take some pics if u like thanx JOHN
 

---

Posted by 1fast281 (Member # 4670) on :
 
Are those black spots on the cobra intake manifold scratches, they won't come off?
 

---

Posted by BlowN67 (Member # 4229) on :
 
I would have to check but think its just a grease smugde.
 

---

Posted by BlowN67 (Member # 4229) on :
 
ttt
 

---

Posted by BlowN67 (Member # 4229) on :
 
ttt
 

---

Posted by slow96cobra (Member # 6001) on :
 
i need the imrc plated would you sell them seperately
 

---

Posted by BlowN67 (Member # 4229) on :
 
TTT
 

---