347 stroker kit "NEW" REDUCED - Northern California Ford Owners

This is topic 347 stroker kit "NEW" REDUCED in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=046669

Posted by Cm4hawks (Member # 5231) on :

This is a 347 stroke kit comes with

Probe Industries 4340 Steel Crank
Crower I-Beam rods
Probe Dome Pistons
Probe Main stud Girdle

All you need is a block and this thing assembled.

$1100 for everything

347 Kit
Girdle
Pistons
Crank

[ May 20, 2007, 02:18 PM: Message edited by: Cm4hawks ]

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by modular (Member # 6599) on :

Im looking for a 347 short block but was wondering after buying your kit and a block and paying for assembly How much would this 347 cost?

Posted by Cm4hawks (Member # 5231) on :

my machine shop said they would assemble and blalance the motor for 1100. and thats doind the machine work to the block also

[ March 10, 2007, 10:42 AM: Message edited by: Cm4hawks ]

Posted by phil a (Member # 6951) on :

ouch

Posted by Cm4hawks (Member # 5231) on :

OUCH?? why ouch

Posted by LOCKDOWN (Member # 4768) on :

1100,dammmmmmmmm 'that's crazy' the place where i get mine work done probably charged half of that....

[ March 10, 2007, 07:09 PM: Message edited by: LOCKDOWN ]

Posted by HaulinAss Motorsports (Member # 541) on :

quote:
Originally posted by LOCKDOWN:
1100,dammmmmmmmm 'that's crazy' the place where i get mine done probably charged half of that....

with ALL machine work,Comp balance and complete assembly? Shit where are you going? $1100.00 is about going rate if not a lil cheaper,for it to be done right.

Posted by LOCKDOWN (Member # 4768) on :

think about it 1100 + 1750 = 2850$$ + other parts you better of calling chp. [Wink]

[ March 10, 2007, 07:10 PM: Message edited by: LOCKDOWN ]

Posted by Cm4hawks (Member # 5231) on :

well CHP you will not get the Balancer Flywheel or Crower rods or Dome pistons. Trust me i did my research before i posted . But go ahead and try

Posted by SlowStockFox (Member # 1081) on :

[ March 14, 2007, 12:31 AM: Message edited by: SlowStockFox ]

Posted by SlowStockFox (Member # 1081) on :

[ March 14, 2007, 12:32 AM: Message edited by: SlowStockFox ]

Posted by Cm4hawks (Member # 5231) on :

yes if just boring the block yeah thats cheap but you heave to clearance the block for the stroker and balance. As far as running it. I have a r-302 347 i am building plus i have a 331 and this 347 kit i have pleanty of motors. People have thier own opion on stuff but look at the quality. Crower over eagle for rods and this is a High compression motor for people who either do not want to run a power adder or can not afford one. Thanx for everyones support though

Posted by phil a (Member # 6951) on :

ttt, ouch regarding the machine shop labor, but i did not read assembly/balance included
[Smile]

Posted by Cm4hawks (Member # 5231) on :

Its ok No problem [Smile]

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by SPEC -Fabrication (Member # 4980) on :

quote:
Originally posted by LOCKDOWN:
think about it 1100 + 1750 = 2850$$ + other parts you better of calling chp.

CHP = garbage......

Posted by allmotor65stang (Member # 6668) on :

damn 1100 wtf i got mine done for 500 everthing u can think of.

Posted by bottled95GT?? (Member # 1772) on :

look, its his price his sale, leave it at that. If you can get it cheaper else where, then go there. Geez, if i wanna sell something for what i believe is the right price, thats my issue not yours. Just my .02. TTT for ya bud

Posted by BlowN67 (Member # 4229) on :

you get what u pay for.. if u think 500 a good deal for machine an put together. than so be it. money is well spent in machine work an checking for every little thing. I rather have good components in a well put together motor. just .02 take it ur own way [patriot]

Posted by JohnB (Member # 969) on :

quote:
Originally posted by SlowStockFox:
that is a ton of cash for just a 347. my windsor stroker project. block from pick in pull 75. {witch i sold the heads for 50}{it was a long block}

my kit i want is only 950 to 1100 depends on a few things i got with. i got my block 30 over all machenied...for 346.98 from a shop. do the math... i have a stroker windosr for cheap. i will be building my motor tho... so thats some of the diff. also

If you only paid $350 for machine work, you didn't have shit done to it. No line bore, no sonic check, no bore with deck plates. A decent balance job is more than that alone. Also, if your kit comes with a balancer and flywheel...you have a CHEAP kit. I wish you luck in it staying together.

Back to the topic...are you firm on the price?

Posted by Cm4hawks (Member # 5231) on :

Thanx John LOL

Posted by allmotor65stang (Member # 6668) on :

i was talkin 500 for machine work only..how hard is it to put a motor together..

Posted by Cm4hawks (Member # 5231) on :

Like i told some one else I am not hurting for money. This kit does not eat and it does not take up much space so if some one wants it i will sell it if not its not a big deal.

Posted by JohnB (Member # 969) on :

quote:
Originally posted by allmotor65stang:
i was talkin 500 for machine work only..how hard is it to put a motor together..

LOL!!! I hear that alot, especially after a quote is given for a engine build...everyone thinks it's simple and it's easy...yet no one does it.

"Anyone can ASSEMBLE a engine...it takes a real enthusiast to BUILD one" [Wink]

Posted by SPEC -Fabrication (Member # 4980) on :

quote:
Originally posted by allmotor65stang:
i was talkin 500 for machine work only..how hard is it to put a motor together..

lol You'll say that again when you are tearin it apart due to tolerance issues [Wink]

Good thing not all people think that way about motor building....

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by onesicklx (Member # 285) on :

quote:
Originally posted by SPEC -Fabrication:

quote:
Originally posted by LOCKDOWN:
think about it 1100 + 1750 = 2850$$ + other parts you better of calling chp.
CHP = garbage......

can you share your personal experiance with chp?

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by TOPnotch (Member # 1340) on :

ttt good parts for sale here. Its ok all the real engine builders here know what quality parts and good machine work cost. People don't get it!!!!!!!! [patriot]

Posted by Duncan Motors (Member # 7045) on :

i wonder what made that windsor a stroker? gettin 30 over ? ok! that's going rate of any decent shop, if not more! u can have as much as 3 grand in machine work with no parts! how far do u wanna go is the real question, of just makin sure it's right while spinnin 8000 rpm, an have a peice of mind that it ain't gonna blow up an destroy the other 4 to 5 grand of damn parts around the short block. or u can go to the junk yard an hope for the best borin 30 over,but youll never be fast just lucky! a 351 30 over is a stroker now by the way.what a waste of typing for some one that is tryin to sell somthin an here i am contributing to the bull ! sorry good luck with the sale. i'd be interested but h beam rods only if i spend any kind of lute!

Posted by Cm4hawks (Member # 5231) on :

ttt

Posted by Cm4hawks (Member # 5231) on :

SALE PENDING THANKS CAFORDS

Posted by Quick65 (Member # 6153) on :

i heard the hell out of that. these I-beam crowers are nowhere near as strong as an eagle h-beam. i've seen this kit first hand...matter of fact i was there when you bought it from joey. and this is one of the reasons as to why he was discouraged enough to sell it. he was already into the kit for almost $2k and still needed another $1k of machine work. he decided to sell the parts and just buy a complete shortblock that was already assembled.

Posted by BlowN67 (Member # 4229) on :

he wasnt the one that bought the kit from Joey..
theres nothing wrong with crower rods.

Posted by SlowStockFox (Member # 1081) on :

edit.... ttt good luck with the sell

[ March 14, 2007, 12:29 AM: Message edited by: SlowStockFox ]

Posted by Cm4hawks (Member # 5231) on :

Back up for sale

Posted by STANGSALLY76 (Member # 5342) on :

THATS MY KIT I SOLD TO BlowN67
ITS A BADASS SET UP FOR N/A OR A SHOT OF
SQUEEZ AND ITS ALL READY BALANCED AND ALL
SHARP EDGES REMOVED FROM PISTONS FOR N.O.S

Posted by Cm4hawks (Member # 5231) on :

Thanks StangSally TTT

Posted by Cm4hawks (Member # 5231) on :

ttt

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by Cm4hawks (Member # 5231) on :

ttt

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by Eddie510- (Member # 2354) on :

quote:
Originally posted by TOPnotch:
ttt good parts for sale here. Its ok all the real engine builders here know what quality parts and good machine work cost. People don't get it!!!!!!!!

+1

[ March 28, 2007, 03:30 AM: Message edited by: Eddie510- ]

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by Cm4hawks (Member # 5231) on :

ttt

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by Cm4hawks (Member # 5231) on :

trades welcome [Smile]

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by rickm347 (Member # 5323) on :

after reading those junk ass posts that shouldnt even be on your thread, I would say you might have better luck on ebay so that you wont have to read about people knockin your goods. . . . .TTT --rick

Posted by Cm4hawks (Member # 5231) on :

yeah i just hate to have to worry about shipping. I just put it on the Corral and NMRA so lets see what happens

Posted by Cm4hawks (Member # 5231) on :

ttt

Posted by Cm4hawks (Member # 5231) on :

TTT

Posted by Cm4hawks (Member # 5231) on :

ttt

Posted by sac 5.0 (Member # 2980) on :

willing to just sell the main girdle

Fueled by Ford Mustang Owners
on CaliforniaFords.com