This is topic FS 351W Block/Crank $800 in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=046391
Posted by mnstruc (Member # 5652) on :
 
I have a 1989 351w Block with a forged Scat crank. The block has ARP main studs, and has been boiled, bored .030 over, new cam bearings installed, new brass freeze plugs and is ready to assemble. I have a Scat crank to go with it which has been turned .010/.010. In addition, I have a set of used stock rods with forged pistons that are in great shape and can be reused. I will throw in a new set of bearings, rings, and Felpro gaskets to put it together. You'll need a cam, lifters, timing set, and oil pump to complete a short block build up. This could be a great street or race motor.
 
Posted by COPFITY (Member # 1845) on :
 
wrong section yo
 
Posted by JohnB (Member # 969) on :
 
Stock stroke crank? What's the CR on the pistons? Definitely interested!

And we should probably move this to For Sale. [Wink]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com