This is topic FS: Comp cams custom grind in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=045520
Posted by JohnB (Member # 969) on
:
For sale- Comp cams custom ground cam (roller)- specs are as follows:
.566/.536
232/224 @.050
110 c/l
It's your standard 5.0 HO firing order. $175 obo takes it.
Posted by 93PONY (Member # 60) on
:
Not to be anal or anything, but the specs are not correct on the cam card.
When using a SBC lobe on a Ford there's 2 ways to do it. One is to grind it as a chevy lobe on a ford stick....this is the most comon way & will make the lobe in question GROW 4 degrees at .050. The other way is to have the chevy lobe converted over to a Ford lobe before grinding on the stick. This makes the lobe exactly the same as on the cam card. Typically this is denoted by an 'F' after the lobe # on the back of the camshaft.
This is obviously a HiTech cam (or copy of one) as it's the same spec cam Camara90 ran. (232/228 110LSA)
This camshaft in an AFR185 headed 347 made damn near 400RWHP & TQ.
Same cam made 335RWHP on an AFR165 headed 180K mile stock shortblock.
VERY nice cam!
Posted by JohnB (Member # 969) on
:
Unfortunately, I don't have the card to refer to. I'll double-check the card tomorrow at work.
Thanks for the correction.
Posted by full throttle (Member # 7220) on
:
i don't know how this shit works, but maybe you can help me. With that spec, is it possible putting it in a stock 5.0?
Posted by Eddie306 (Member # 2354) on
:
quote:
Originally posted by full throttle:
i don't know how this shit works, but maybe you can help me. With that spec, is it possible putting it in a stock 5.0?
sup bro, i met you at the bowling alley, get this cam and a set of afr's
Posted by 91 5.0 5speed (Member # 1867) on
:
quote:
Originally posted by JohnB:
For sale- Comp cams custom ground cam (roller)- specs are as follows:
.566/.536
232/224 @.050
110 c/l
It's your standard 5.0 HO firing order. $175 obo takes it.
Interested in any trades?
Posted by JohnB (Member # 969) on
:
quote:
Originally posted by 91 5.0 5speed:
quote:
Originally posted by JohnB:
For sale- Comp cams custom ground cam (roller)- specs are as follows:
.566/.536
232/224 @.050
110 c/l
It's your standard 5.0 HO firing order. $175 obo takes it.
Interested in any trades?
I would, but selling it for a friend.
This cam would work if set up correctly in a 5.0...
Fueled by Ford Mustang Owners
on CaliforniaFords.com