This is topic WIKD 281 For Sale in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=044421

Posted by WIKD 281 (Member # 40) on :
 
99 Mustang Cobra convertible
Black on Black

623rwhp @15psi of boost w/o ice in cooler
Tuned By Byron Reynolds- 2 chips available, race and street tunes.
Pro-M 80mm Mass Air
AFM Power Pipe
Autometer Pillar Gauge Pod (Custom Molded to a one piece pod)
2- Autometer Phantom White Faced Gauges (Fuel and Boost)
FMS A/C Delete kit w/F-150 8 rib pulley
Vortech S-SQ trim
Vortech Aftercooler
Vortech (Race) Bypass
HCI-Hamilton Clarke fully built motor, ported and polished heads, blower cams.
283 cu. in. motor after Refreshing the motor about 6 months ago.
ARP Head and Main studs
Canton Oil Pan w/windage tray
Return style fuel system w/upgraded fuel lines (no seepage of fumes)
Sumped And Baffled Factory Tank
Weldon 2025 pump
Weldon Dial A Flow controller
Aeromotive Fuel Regulator
Converted to a solid 8.8 rearend
FMS Trac lock differential
31 Spline Moser Axles
TA Performance Differential Cover
Converted Factory Rear Rotors to fit the 8.8 in rear (Mustang Bullit adaptors)
Mega bite Jr upper and lower rear control arms
Battle boxes (Steel plates to reinforce rear floor upper and lower control arm mounts)
AJE Tubular K member w/roadracing bracing
HPM caster camber plates
Tokico Adjustable Drag Struts
50 pd. MSD injectors
6-point Chrome Alloy Roll bar (Custom Painted to Match Factory Dark Gray Interior)
Cobra Grille Emblem
Hood Lifters/ Shocks
Simpson 6-point racing Harness
Aluminum Drive shaft
03 Cobra Front and Rear Bumpers
Ford F-150 8 Rib Pulley Setup
Custom Made Idler Pulley
FMS Drive shaft safety loop
MIL Eliminators
Taylor Battery Relocation Box (mounted in trunk)
Bassanni X pipe (aftermarket cats welded on)
Bassanni Quiet thunder cat back
Kenny Brown Sub frame connectors
Saleen 18x9 Chrome Wheels
Michelin Pilot Sport Tires 265/35/18 Front
Nitto Drag Radial Tires 285/35/18 Rear
Bullit Side Vents (Flush)
Custom Shortened Radio Antenna
BBK long tube headers
BRAND NEW TREMEC 6 SPEED, WITH SHORT THROW SHIFTER, CENTERFORCE DFX CLUTCH, THROW OUT BEARING, PILOT BEARING, AND ALUMINUM DRIVEHAFT
You can reach me at Haroldseven@comcast.net or you can reach me at (510)504-5444.
Asking $17,000
[patriot]

[ October 09, 2007, 06:09 PM: Message edited by: WIKD 281 ]
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
 -

[ November 28, 2006, 08:19 PM: Message edited by: WIKD 281 ]
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by BOTTLED.LX (Member # 3267) on :
 
ttt for fast car [worship]
 
Posted by phil a (Member # 6951) on :
 
that car is beautiful, ttt
 
Posted by IRISH (Member # 1629) on :
 
Sorry to see it go! Good Luck Brother!
 
Posted by WESTsacFIFTYS (Member # 7048) on :
 
LOL WANNA RUN EM?
 
Posted by bottled02GT?? (Member # 1772) on :
 
nooooo =( seen this car a few times in person. Hate to see it go. Bump for ya
 
Posted by WIKD 281 (Member # 40) on :
 
top down chrome spinnin'
[patriot]
 
Posted by CobraTerritory (Member # 6476) on :
 
just a quick question is that the MM 6pt cage??
 
Posted by Yellow94GT (Member # 431) on :
 
quote:
Originally posted by CobraTerritory:
just a quick question is that the MM 6pt cage??

If I remember right, Harold told me its a Autopower roll bar. [burnout]
 
Posted by WIKD 281 (Member # 40) on :
 
Negative! Its a chrome alloy roll bar. Its made by auto weld. It was welded together by a guy here in Hayward, ca. The roll bar has Chris alstons chassis works quick disconnects for the fold out door bars and a removeable rear cross bar as well.
[patriot]
 
Posted by Yellow94GT (Member # 431) on :
 
quote:
Originally posted by WIKD 281:
Negative! Its a chrome alloy roll bar. Its made by auto weld. It was welded together by a guy here in Hayward, ca. The roll bar has Chris alstons chassis works quick disconnects for the fold out door bars and a removeable rear cross bar as well.
[patriot]

eh, well its an Auto "somthing" roll bar...lol [Razz]
 
Posted by WIKD 281 (Member # 40) on :
 
[patriot]
Just a "Little" difference in price.
[Whoo Whooooo!]
 
Posted by Yellow94GT (Member # 431) on :
 
TTT for one of the cleanest cars on the site. [patriot]
 
Posted by WIKD 281 (Member # 40) on :
 
[Whoo Whooooo!]
 
Posted by WIKD 281 (Member # 40) on :
 
[Whoo Whooooo!] [Whoo Whooooo!]
 
Posted by autumnstang97 (Member # 6111) on :
 
hey can i borrow it for a while? [Big Grin] [burnout] lol...thats a nice cobra...if i was $25k richer...i'd take it...
 
Posted by Larry (Member # 5176) on :
 
Hi Harold! Larry... over in Manteca. Hope you get at least what you are asking. We never get back 1/3 of our investment.

I am looking for the PH. NO. of the guy who made the Kavlar clutches for us.I lost it in amove..Just made a little over 700 rwhp...going for 750 or 760 with a differen't blend of menthanol and Nitro mix. Strictly a racing tune..st. tune is just over 700rwhp. Need his strongest clutch.

Thanks in advance.

Larry HIckey/98 Cobra Vert

[ December 17, 2006, 10:59 PM: Message edited by: Larry ]
 
Posted by WIKD 281 (Member # 40) on :
 
check pm's.
 
Posted by ProjectFox87 (Member # 7048) on :
 
STILL NOT SOLD HUH, I TRIED TO GET A LOAD YESTERDAY FOR THIS DAMN THING. AND I GOT DENIED! FUWKING SPRINT SCHREWED MY CREDIT OVER NOOOO!
 
Posted by WIKD 281 (Member # 40) on :
 
[patriot]
Maybe someone else can help?
[patriot]
 
Posted by WIKD 281 (Member # 40) on :
 
Car is now on Ebay:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120084096132&rd=1&rd=1

[ February 06, 2007, 02:41 PM: Message edited by: WIKD 281 ]
 
Posted by WIKD 281 (Member # 40) on :
 
top
 
Posted by WIKD 281 (Member # 40) on :
 
ttt
 
Posted by WIKD 281 (Member # 40) on :
 
willing to negotiate [patriot]
 
Posted by WIKD 281 (Member # 40) on :
 
?
 
Posted by WIKD 281 (Member # 40) on :
 
$18,000
 
Posted by F8LSN8K (Member # 7080) on :
 
i see u still have it, seen u last night on 280, i was in a silver taurus.....bad ass car and sounded real good [patriot]
 
Posted by WIKD 281 (Member # 40) on :
 
Thanks! haha....I just re-found the post! Thanks google.

Still for sale.
Just got done putting in a Brand New Tremec 6 speed, aluminum driveshaft, Centerforce DFX clutch, throw out bearing and pilot bearing.
Having problems on cold start up. The belt is squeeling for some reason, I have done all I can to try and figure things out. Im tired of working on the problem and dont have the patience anymore. Any offers welcome.
Thanks!
 
Posted by BlowN67 (Member # 4229) on :
 
u need some better pics up of this beast. remember seeing this vert back in the day next try2paz.
 
Posted by WIKD 281 (Member # 40) on :
 
Thanks. Gotta get some updated pics. Hopefully tomm. I will get home in time to wash it up and take some pics [patriot]
 
Posted by BlowN67 (Member # 4229) on :
 
are the rear seats still usable?
 
Posted by WIKD 281 (Member # 40) on :
 
Definately! The rear crossbar on the 6 point chrome moly roll bar is removeable to make it a little easier for when you want to race with 4 in the car [Big Grin] [Big Grin]
 
Posted by BlowN67 (Member # 4229) on :
 
dayum i need to sell my boat. cant take on anymore payments right now [Frown]
 
Posted by WIKD 281 (Member # 40) on :
 
[patriot]
 
Posted by WIKD 281 (Member # 40) on :
 
[Whoo Whooooo!]
 
Posted by WIKD 281 (Member # 40) on :
 
[Whoo Whooooo!]
 
Posted by WIKD 281 (Member # 40) on :
 
ttt
 
Posted by IRISH (Member # 1629) on :
 
To the Top for a Bad Ass Car!

Good Luck with the sale Bro!
 
Posted by 9cobra7 (Member # 2812) on :
 
It sucks how much money we lose on these cars. I can't beleive someone hasn't picked this thing up yet for a steal at 18k. Is everyone that broke.
 
Posted by F8LSN8K (Member # 7080) on :
 
quote:
Originally posted by 9cobra7:
Is everyone that broke.

YES!
 
Posted by venomous99 (Member # 1917) on :
 
quote:
Originally posted by 9cobra7:
Is everyone that broke.

no,many have too many cars and cant add another one to the family.
 
Posted by WIKD 281 (Member # 40) on :
 
[Big Grin]
 
Posted by WIKD 281 (Member # 40) on :
 
[patriot]
 
Posted by RioredGT (Member # 2300) on :
 
Damn!! Did i read page 1 right, asking 17K [Eek!] [Eek!]

TTT for a steal [patriot]
 
Posted by WIKD 281 (Member # 40) on :
 
Yup, thats right 17,000 takes it home. I was driving it last night after I changed the belt and it was running strong [Big Grin]
Drag radials dont hook up much when cold.
Love the cold nights when the cold air chills that intercooler [Big Grin] [Big Grin]
 
Posted by BlowN67 (Member # 4229) on :
 
my boats on craigslist hopefully goes soon so i cant talk the wife into this beast. got an pics please send my way gonein67@aol.com TTT for u HAROLD
 
Posted by WIKD 281 (Member # 40) on :
 
2 minutes. Pics. coming. [patriot]
 
Posted by BlowN67 (Member # 4229) on :
 
looking good. cant believe u still have it.
 
Posted by WIKD 281 (Member # 40) on :
 
haha. Yeah, I guess im one of the last in the orignal 98 cobra group. Matt (9cobra8) I think will have his forever [Big Grin]
 
Posted by WIKD 281 (Member # 40) on :
 
Back up top
 
Posted by Don (Member # 938) on :
 
Can you get a smog for the car?
 
Posted by WIKD 281 (Member # 40) on :
 
yes.
 
Posted by WIKD 281 (Member # 40) on :
 
http://www.californiafords.com/album/VIDEOS/01_12_02/wikd281_dyno.mpg

I just found this video of when we tuned the stock motor with Byron Reynolds.
Good times [Big Grin]

[ October 10, 2007, 11:59 PM: Message edited by: WIKD 281 ]
 
Posted by WIKD 281 (Member # 40) on :
 
haha!
11.4@127 back in the day........on stock motor....

http://www.californiafords.com/album/VIDEOS/01_12_02/wikd281_127mph.mpg
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
Little 4.6 puts puts down some good numbers [Big Grin]
 
Posted by WIKD 281 (Member # 40) on :
 
Just a few dollars for a little bit of horsepower [patriot]

[ October 11, 2007, 10:58 AM: Message edited by: WIKD 281 ]
 
Posted by WIKD 281 (Member # 40) on :
 
[burnout]
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by WIKD 281 (Member # 40) on :
 
 -
 
Posted by 1SLOWLX (Member # 558) on :
 
that is one nice car. I wish I could add it to the collection but I got no where to put it
 
Posted by WIKD 281 (Member # 40) on :
 
Top up or down, you'll beat most cars on the streets today [Big Grin]
Its a good time [Big Grin]
 
Posted by 1SLOWLX (Member # 558) on :
 
how is the cars street manners on pump gas?
 
Posted by WIKD 281 (Member # 40) on :
 
I have never noticed a difference between pump gas or race gas and driveability. Its hard to notice a difference between the different chips as well. I guess mostly because 90% of this cars life its been on radials. The only times the slicks have been on were at the track and anything above 5000 your spinning the tires.

[patriot]
 
Posted by cummins (Member # 5931) on :
 
Car has been sold this weekend!!!!

[ October 22, 2007, 01:19 PM: Message edited by: cummins ]
 
Posted by hidnn.o.s. (Member # 1219) on :
 
It's a nice car.
 
Posted by cummins (Member # 5931) on :
 
And it already has 1 kill under its belt with the new owner. Some SS on a 150 shot went down hard.
 
Posted by hidnn.o.s. (Member # 1219) on :
 
Sounded like an insane amount of money invested for the low price offered.
 
Posted by cummins (Member # 5931) on :
 
Yes it sure was. The new owner got it for a STEAL of a price. But at least both people got what they wanted and the car was sold to a fellow Cafords member.
 
Posted by aslowdodge (Member # 854) on :
 
Hey Harold, Sorry I didn't get a chance to talk to you at Casa Orosco a while back.
So what's the next car going to be?
 
Posted by jayl (Member # 185) on :
 
edit: someone got a good deal on a fast car!

[ October 23, 2007, 05:34 PM: Message edited by: jayl ]
 
Posted by WIKD 281 (Member # 40) on :
 
quote:
Originally posted by aslowdodge:
Hey Harold, Sorry I didn't get a chance to talk to you at Casa Orosco a while back.
So what's the next car going to be?

Hey, whats up Kevin? I bought a rockcrawler about a year ago and it seems as if all my time is going toward that. Its a blast! Hot rod will be a while down the road. Dont have my mind set on anything at this point, but I love the way the new Z06 looks. We'll see [Big Grin]
How about you? Viper running good? Any other projects in the works?
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com