This is topic Tremec for sale in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=044387
Posted by 90lxfoxbody (Member # 6947) on
:
Well im going to do a c4 in my 86 and im looking to sell my complete setup.
Its a 3550 that was just rebuilt with all new bearings and anything else that was remotely warn....HAs a couple of new blocker rings all new bearings seals,all the rollers in the gear clusters.
comes with a pro 5.0 shifter a 1500mile old center force clutch bell housing.
the trans has less then 300 miles on the rebuild.
1500.obo
Posted by hidnn.o.s. (Member # 1219) on
:
Very interested. Where are the parts located and when are you available to meet?
Posted by 90lxfoxbody (Member # 6947) on
:
im in fresno and the trans will be out this weekend....
Posted by 87#184saleen (Member # 6276) on
:
good luck on the 6hr drive
Posted by hidnn.o.s. (Member # 1219) on
:
Ya, never mind.
Do you have DATED receipts showing how old the trans is>?
Posted by 90lxfoxbody (Member # 6947) on
:
i have dated reciepts on the parts from last month,the tranny was built by a buddy who builds my race tranny and many other trannys....Its very obvious the trans is fresh....or come drive the car while its still in it.....I actually have some new stuff that got double ordered left over from tremec.
Posted by 90lxfoxbody (Member # 6947) on
:
bump
Posted by clewis1600 (Member # 6286) on
:
hey whats up with that transmisson my name is Rob my #510-706-4393
Posted by clewis1600 (Member # 6286) on
:
hey whats up with that transmisson my name is Rob my #510-706-4393
Posted by 90lxfoxbody (Member # 6947) on
:
what would you like to know?its in the car right now if people wanted to test drive it first....I can take pics of it in the car and show its clean from the rebuild and i have reciepts for the parts from tremec,350 bucks worth and i got the parts at cost threw my brothers company would cost the joe blow like 500 bucks...Clutch is a dual friction center force and its like 1500 miles old max,tranny has 300 to 400 on it right now.
Posted by 90lxfoxbody (Member # 6947) on
:
bump
Posted by 90lxfoxbody (Member # 6947) on
:
bump,i cant believe someone doesnt have a blown up t5 that wants to upgrade.Im doing the swap because im putting in a c4.the tranny shifts and is like new.
Posted by n8y8 (Member # 6048) on
:
quote:
Originally posted by 90lxfoxbody:
bump,i cant believe someone doesnt have a blown up t5 that wants to upgrade.Im doing the swap because im putting in a c4.the tranny shifts and is like new.
I think its more how far you are than anything else. I was interested until I looked up how far fresno is.
Posted by 90lxfoxbody (Member # 6947) on
:
i can meet half way...it will be out in a week or so.....c4 is almost done.
Posted by v-town coupe (Member # 2771) on
:
quote:
Originally posted by 90lxfoxbody:
bump,i cant believe someone doesnt have a blown up t5 that wants to upgrade.Im doing the swap because im putting in a c4.the tranny shifts and is like new.
yeah man that drive is kinda far and lets say i was going to do a tremec swap i would still need a bell housing and a driveshaft yoke before i could even consider it in my car!
Posted by 90lxfoxbody (Member # 6947) on
:
to the above poster...I will give you everything.The tail yoke is the same as a t5 and i will give you the bell housing and turned flywheel.
You can use a stock driveline on this trany.
Posted by 90lxfoxbody (Member # 6947) on
:
bump
Fueled by Ford Mustang Owners
on CaliforniaFords.com