This is topic Where are the CAGE fabricators located at near Yuba City? in forum Drag Racing at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=002027
Posted by Olie Malit (Member # 11008) on :
 
I need to get a minimum of a 6pt but i'm thinking about just getting a 10pt while i'm at it. i have an appointment at Sarmento in yuba city but dang its taking so long and he has me schedule 6-7 weeks out.

after the 1st of april, i'm open to delivering my car somewhere to get it done. i'll drive within 90 minutes of yuba city.

searching for fabricators on the google really isn't much help.
 
Posted by Notch1320 (Member # 2647) on :
 
Dennis Sarmento in Yuba City

Wizard Racing in Woodland, CA (I know he is quite busy)

G&B Racecraft & Fabrication in Woodland, CA

And Matt's Fab Shop In Orland, CA
 
Posted by Yellow94GT (Member # 431) on :
 
quote:
Originally posted by Olie Malit:
I need to get a minimum of a 6pt but i'm thinking about just getting a 10pt while i'm at it. i have an appointment at Sarmento in yuba city but dang its taking so long and he has me schedule 6-7 weeks out.

after the 1st of april, i'm open to delivering my car somewhere to get it done. i'll drive within 90 minutes of yuba city.

searching for fabricators on the google really isn't much help.
I remember being on Dennis's 6-7 week waiting list. Never did end up getting in there. He didn't seem real fond of the idea of working on a street car when he was plenty busy with all out race cars.

[ March 30, 2012, 11:09 AM: Message edited by: Yellow94GT ]
 
Posted by Brandonn (Member # 632) on :
 
What kinda cage do you want ? how fast are gonna go ?
 
Posted by Liln2o (Member # 9652) on :
 
Bigheadcars.com alex did my fab wrk and he is in lincon ca not to far frome u...
 
Posted by Olie Malit (Member # 11008) on :
 
I'm gonna start calling people on Monday. I have a new motor coming in two weeks and i told the builder I wanted enough power to go 11.0 e.t. I had the motor built for 150-175 shot of Nos. Estimated power is 625 and it should be going into dyno this weekend.

All ill probably need is a 6 pt but I guess might as well be prepared for more.
 
Posted by Olie Malit (Member # 11008) on :
 
ok i lied and started calling a few guys today. some of the shops i could not find a number for. however, g&b racecraft called me back and he said he could get me in by next saturday.

thanks for the help everybody.
 
Posted by MachYou (Member # 7934) on :
 
quote:
Originally posted by Olie Malit:
ok i lied and started calling a few guys today. some of the shops i could not find a number for. however, g&b racecraft called me back and he said he could get me in by next saturday.

thanks for the help everybody.
Robby ftw
 
Posted by 1FAST89GT (Member # 5071) on :
 
pm sent
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com