This is topic Got in the 10s in forum Drag Racing at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=001847
Posted by 87 hatch (Member # 8100) on
:
Car went 10.86 at 128.50 with a 1.66 60 foot .1/8 mile 101.5 mph
Posted by forced331 (Member # 1270) on
:
Congrats!
Posted by SmokinLX (Member # 1684) on
:
Nice work. Anything in the 10's is scootin!!
Posted by hidnn.o.s. (Member # 1219) on
:
Nice runs Barrie!
Posted by Yellow94GT (Member # 431) on
:
Great job!
Where you at Sac last night?
Posted by 87 hatch (Member # 8100) on
:
It was at infineon . I ran 11.045 and 11.015 and my last run was the 10.86 . The wind died down for my last run
Posted by 94 N.C.F. GT (Member # 3946) on
:
NICE......
Posted by Pure Stang (Member # 7251) on
:
Video or it did not happen .. congrts
Posted by 2stangs69-91 (Member # 1951) on
:
Congrats!!! Thats moving.
Posted by Team SOLO (Member # 722) on
:
Congrats!!!!
I remember the day I went 10s for the first time. Grinning ear to ear. I thought...what can be better than this?
Just wait...the addiction will kick in and you will shoot for 9s...then 8s...then 7s....
Posted by streakmatt (Member # 6257) on
:
Congrats on the achievement What blower are you running? What psi?
Posted by forced331 (Member # 1270) on
:
I believe he is running an S-trim with T-trim internals with a 3.7" pulley boosting about 7psi. 10.1 compression 347!
Posted by 87 hatch (Member # 8100) on
:
That's my setup but I only seen 6.4 lbs of boost the run before that . There is a video but the guy who was recording wasn't around when I launched so he only got half the pass .
Posted by jaejae (Member # 7958) on
:
i saw your car parked at infineon yesterday...dint get to see any passes tho ..hopefully next time
Posted by streakmatt (Member # 6257) on
:
quote:
Originally posted by 87 hatch:
That's my setup but I only seen 6.4 lbs of boost the run before that . There is a video but the guy who was recording wasn't around when I launched so he only got half the pass .
7 psi and you went 10.86
How much boost you plan on trying with the 10:1 setup?
Posted by 87 hatch (Member # 8100) on
:
Thats it on the stock fuel system
Posted by 2TONE (Member # 4216) on
:
Good shit
Posted by need-a-cage (Member # 5415) on
:
Don't blow that thing up trying to beat my 10.84!
Posted by season'd 88 (Member # 169) on
:
Congrats!
Posted by 87 hatch (Member # 8100) on
:
u never ran in the tens at infineon so i beat u
Posted by hidnn.o.s. (Member # 1219) on
:
quote:
Originally posted by 87 hatch:
u never ran in the tens at infineon so i beat u
Craig, that's an absolute valid point!
Posted by need-a-cage (Member # 5415) on
:
I could easily run 10's at Infineon. I 60ft better at Infineon than I do at Sac. It was also a very warm day when I was there. I only had 2 passes with my 10 second setup on 1 day. If I had week after week of running that setup I am sure I could have knocked a couple tenths off that. I only ran two passes and it went 10.84 and 10.87. I put the 3.33" pulley on and ran 11.08, 11.11, and 11.16 at the same mph I had previously run at Infineon with that pulley and the Nittos.
I would prove it but they would never let me back! I ran 11.44 on Saturday with a 3.8" pulley at Infineon so the 3.12" pulley which gives me another 5-7 psi of boost should put me pretty deep into the 10's.
Barry will probably beat my 10.84 the next time out. I want to get the TKO in the car and then we both need to go to Sac and see how they compare in the same conditions. I don't have a chance if he puts on a smaller pulley, but that can be dangerous with 10:1 and no intercooler. Of course the MPH will be off at Sac now that they screwed up the trap.
Posted by hidnn.o.s. (Member # 1219) on
:
I call bs to all Sac times/mph's.
Unless they're duplicated at Sears Point, they just are soft numbers...
Posted by need-a-cage (Member # 5415) on
:
The times are valid. The mph got screwed up AFTER I made my 10 sec pass there. Just look at Barrie's 302 pass that was over 130mph but his 1/8th mile speed was slower than mine on my 128.5mph pass. If you look at his 1/8th speed on his 128.5mph pass at Infineon it is almost identical to my 1/8th pass on my 128.5mph run at Sac. I ran the same pulley at both tracks and the speed was the same.
When was the last time you ran a car at Sac? We'll see what all the guys from Infineon do there in a couple weeks in the Division 7 finals. I have talked to several guys at Infineon that have run recently at Sac and their ET's are the same as Infineon on a night without a head wind or on a weekend event when the track is prepped better. It all depends on the wind and air temp on the day you race.
If I can get 11.44 with a 3.8" pulley and 7psi of boost, I can surely hit the 10's with a 3.12" pulley and 12-14psi of boost.
Posted by 87 hatch (Member # 8100) on
:
So Craig you time is BS .I guess you need to put a cage in that thing and run it at Infineon
Posted by hidnn.o.s. (Member # 1219) on
:
quote:
Originally posted by 87 hatch:
you need to put a cage in that thing and run it at Infineon
Posted by Nifty50 (Member # 9987) on
:
Congrats!
Posted by 87 hatch (Member # 8100) on
:
He wont do the cage . He cant get the car seats in there if he dose
Posted by need-a-cage (Member # 5415) on
:
Yep, I will probably never do a cage. Over half the miles I put on that car are with the kids in the back. If I lose access to that back seat the car will never get driven. If it was legal to make the cage with a removable bar behind the front seats then I would consider it.
Fueled by Ford Mustang Owners
on CaliforniaFords.com