quote:

---

Originally posted by 3xblack GT:
yes there is, i'll be there in my ls1, alot of my boyz wid 03n up cobra will be there.

---

I'm trying my best but i gotta chase down this darn vibration from the rear.

I'm hoping it's just the tires needing to be balanced again
 

---

Posted by Yellow94GT (Member # 431) on :
 
We will be out there with some customers cars. Hopefully going to take a shot at the fastest 03 in Norcal title.
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by Yellow94GT:
We will be out there with some customers cars. Hopefully going to take a shot at the fastest 03 in Norcal title.

---

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Yellow94GT:
We will be out there with some customers cars. Hopefully going to take a shot at the fastest 03 in Norcal title.

---

Best of luck to you guys!

If i can't get my car running i may just head up and vid tape everyone.

By the way Drew do you know of many 03/04's in the 10's besides your customers vert and FoxGT?

---

FoxGT is also a customer. As far as I know he is the fastest Cobra around and looking to go a lot faster.

The only other 2, 10 second 03/04 Cobra's that I know of are JeffS old car, (which is in our shop now getting setup to go low 9's/high 8's), and sean04 who sold his Cobra. Last I heard, the new owner missed some gears and had some P2V contact. He is in the process of building a new motor of some sort.

[ November 30, 2006, 07:52 PM: Message edited by: Yellow94GT ]
 

---

Posted by TURBOGT (Member # 234) on :
 
We'll be leaving the orchard supply parking lot in foster city around 8:30am on saturday. I'm taking up my junk and a couple of buddies with an '03 cobra and a '64 nova.
 

---

Posted by speeddhb (Member # 6593) on :
 
Trixsnk have you tried someone else's drivshaft to see if that is the problem? The stock one's are notorious shakers. I just had my buddy's 95 go through the same problem and as soon as I let him borrow my FRPP shaft it went away. Good luck!
 

---

Posted by speeddhb (Member # 6593) on :
 
Oh BTW when the tires get old the inside seperates in the lining and there is no way to get around balancing, just have to get new tires. I asked a few of my buds that work at the tire dealers
 

---

Posted by Jmir018 (Member # 1414) on :
 

quote:

---

Originally posted by TURBOGT:
We'll be leaving the orchard supply parking lot in foster city around 8:30am on saturday. I'm taking up my junk and a couple of buddies with an '03 cobra and a '64 nova.

---

that's in my city.
i wish i could cruise with you guys but i'll be busy that. let me know when you guys cruise again. the only reason why i don't go anymore is cause sac is so darn far away and cruising alone sucks!

 

---

Posted by 93PONY (Member # 60) on :
 
The Wife & I will be out there racing (both of us). Hopefully someone will bring a trailor.
JK
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by speeddhb:
Trixsnk have you tried someone else's drivshaft to see if that is the problem? The stock one's are notorious shakers. I just had my buddy's 95 go through the same problem and as soon as I let him borrow my FRPP shaft it went away. Good luck!

---

Thanks for the advice as that was my next place to take a look ..........but i god the wheels re-balanced and it did turn out to be just that THANK GOD!

Must have tossed a wieght in the burnout box or maybe when i got some wheel hop on 1 of the runs.

Oh well the price you pay to go fast on the IRS

I'm in the process of throwing on the 3.0" pulley and the quest goes on for the 10's

See you guys tomorrow!

Don't forget to say wassup when you see me.
 

---

Posted by Lilghoust (Member # 20) on :
 
glad it was something small. Good luck tomorrow.
 

---

Posted by FoX GT (Member # 4587) on :
 
All you 03/04 cobra's better come with your "A Game"


 

---

Posted by 93PONY (Member # 60) on :
 

quote:

---

Originally posted by FoX GT:
All you 03/04 cobra's better come with your "A Game"

---

All you Cobra's better come with your 'A' game....
This means YOU Saf! hehehe

Some of the fastest Cobra's on the site gonna be out there tomorrow! Yeah!
 

---

Posted by 98slowhoe 'FIFTYLX' (Member # 895) on :
 

quote:

---

Originally posted by 93PONY:

quote:

---

Originally posted by FoX GT:
All you 03/04 cobra's better come with your "A Game"

---

All you Cobra's better come with your 'A' game....
This means YOU Saf! hehehe

Some of the fastest Cobra's on the site gonna be out there tomorrow! Yeah!

---

quote:

---

Originally posted by 98slowhoe 'FIFTYLX':
Saf did you get your wheels off the ground or what?

---

I sure did but not in frist i did it going to second!


 

---

Posted by Yellow94GT (Member # 431) on :
 

quote:

---

Originally posted by FoX GT:

quote:

---

Originally posted by 98slowhoe 'FIFTYLX':
Saf did you get your wheels off the ground or what?

---

I sure did but not in frist i did it going to second!

---

Seriously, who the hell spins a 28 inch slick on launch!?

Oh well, I guess nearly 700 ft lbs will do that.
 

---

Posted by FoX GT (Member # 4587) on :
 

quote:

---

Originally posted by Yellow94GT:

quote:

---

Originally posted by FoX GT:

quote:

---

Originally posted by 98slowhoe 'FIFTYLX':
Saf did you get your wheels off the ground or what?

---

I sure did but not in frist i did it going to second!

---

Seriously, who the hell spins a 28 inch slick on launch!?

Oh well, I guess nearly 700 ft lbs will do that.

---

Can you please make it stop!! I don't like to do this ----->


I want to to hook and lift so i can do this ----->
 

---

Posted by SmokinLX (Member # 1684) on :
 
How was the track prep? Alot of car's? I really wanted to get up there today but My part's did'nt show up till 3 . Did anyone break anything or set any new personal best ET or MPH?
 

---

Posted by TRIXSNK (Member # 2844) on :
 
Talk about a great day!

Great turnout very few cars....great weather....even better racing

Here are the slips.....lots of stuff for me to figure out as the clutch seemed to be slipping on the last pass in the top of 4th which leads me to think that's where i lost a bunch of mph and some et. Clutch was very soft after that pass and just didn't feel like the first pass.

All runs were done with the 3.0" upper pulley and straight VP 100 in the tank.

1st pass:
19* timing just trying to get a feel for the new boost level.



2nd pass:
21* timing best launch ever in the car 4500rpm dump and the best 60 ft ever as well. Sucks that the clutch couldn't hold it up top i'm sure it could have gone deeper into the 10's



Had fun out there and nice to see everyone and congrats to all that ran well as there seemed to be a lot of fast cars out!


 

---

Posted by season'd 88 (Member # 169) on :
 
That just might be the perfect post..all the elements. Congrats on your super fast and fun day at the track.
 

---

Posted by 3xblack GT (Member # 1185) on :
 
great job pat...need to take me for a ride, then let me drive it!!!nice to see a 10 sec car driven to the track
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by TRIXSNK:
Talk about a great day!

Great turnout very few cars....great weather....even better racing

Here are the slips.....lots of stuff for me to figure out as the clutch seemed to be slipping on the last pass in the top of 4th which leads me to think that's where i lost a bunch of mph and some et. Clutch was very soft after that pass and just didn't feel like the first pass.

All runs were done with the 3.0" upper pulley and straight VP 100 in the tank.

1st pass:
19* timing just trying to get a feel for the new boost level.



2nd pass:
21* timing best launch ever in the car 4500rpm dump and the best 60 ft ever as well. Sucks that the clutch couldn't hold it up top i'm sure it could have gone deeper into the 10's



Had fun out there and nice to see everyone and congrats to all that ran well as there seemed to be a lot of fast cars out!

---

Look's like You had a great day! Congrat's.
 

---

Posted by TRIXSNK (Member # 2844) on :
 
Season'd88 and Mark - Appreciate the kind words and Mark sorry to hear you couldn't make it up again it was a great day for racing!

Jose - lmk when you want a ride Also i already told my buddy about your clutch needs
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by TRIXSNK:
Season'd88 and Mark - Appreciate the kind words and Mark sorry to hear you couldn't make it up again it was a great day for racing!

Jose - lmk when you want a ride Also i already told my buddy about your clutch needs

---

quote:

---

Originally posted by SmokinLX:

quote:

---

Originally posted by TRIXSNK:
Season'd88 and Mark - Appreciate the kind words and Mark sorry to hear you couldn't make it up again it was a great day for racing!

Jose - lmk when you want a ride Also i already told my buddy about your clutch needs

---

I plan on being there next saturday. You planning on going?

---

Not too sure yet....gotta figure out why the clutch can't hold the hp on the big end

I'm thinking i may need a firewall adjuster and will also try a new quadrant (Fiore).

I did some calcs and based on the 1/8 mi mph on the 10.7 pass i should have picked up much more mph out the back to trap more along the lines of 133-136 but that pass was semi hot-lapped as the pass right before i missed 3rd and got right back in line.

By the way i've been checking the weather as i'm heading up to Tahoe on the 12th and it's gunna shower i think this coming weekend.
 

---

Posted by 2stangs69-91 (Member # 1951) on :
 
nice runs you got what you wanted a 10 sec driver. Nice mph you have a bunch left in it for ET.
 

---

Posted by TURBOGT (Member # 234) on :
 
Great day for drag racing. I ran a best of 11.69 at 120mph on my second pass. I ran over a second quicker and 8mph more than my last time out 3 months ago. Stats on my car:

'93 red GT black interior
Art Carr AOD 9" non-lockup converter full manual valve body transbrake
stock driveshaft 3.55 gears
bone stock 164k throttle body to oil pan 302
homemade turbo kit
15psi T-67 / .96 exhaust housing
race weight with driver 3600lbs

I raced a couple of Z06's that day and beat them by at least 4 cars, that felt good I'm going to up the boost to 20psi and see what happens. I already have a new motor getting built so why not
 

---

Posted by TURBOGT (Member # 234) on :
 


[ December 04, 2006, 03:28 AM: Message edited by: TURBOGT ]
 

---

Posted by speeddhb (Member # 6593) on :
 
Wow! That was a lot of fun! I will never go out there on a Wednesday again. I could have hot lapped the car if I wanted to on TNT. Money well spent. There was a lot of fast 03/04 cobras. I don't think I saw one that was running slower than high 11's. Just in case anybody wants to know I got the stock SD 87 to run a 13.26 @ 103 with a crappy 1.91 60' , and the only reason I got 103 out of it is because of the 60 deg weather and letting it cool down for about 40 minutes before making a run. If anybody wants to chime in on how to get better 60's let me know! I ditched the front sway bar, put 4cyl springs on it, solid lowers, double adj uppers, and pinion set @ -3. Thanks a lot Kevin for your help!
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by TURBOGT:
Great day for drag racing. I ran a best of 11.69 at 120mph on my second pass. I ran over a second quicker and 8mph more than my last time out 3 months ago. Stats on my car:

'93 red GT black interior
Art Carr AOD 9" non-lockup converter full manual valve body transbrake
stock driveshaft 3.55 gears
bone stock 164k throttle body to oil pan 302
homemade turbo kit
15psi T-67 / .96 exhaust housing
race weight with driver 3600lbs

I raced a couple of Z06's that day and beat them by at least 4 cars, that felt good I'm going to up the boost to 20psi and see what happens. I already have a new motor getting built so why not

---

Hey man cobgrats on the #'s

Those were my buddy's in the Z06's you were beating up on lol. It's ok cuz they weren't running very well....most need a need clutch.

Anyway your car sounds nice with the turbo and i'm sure i got 1 of your 11 sec runs on vid.

The white vert and torch red 03/04 Cobra's were my buddies as well. They had really good days running mid 11's w/ only upper pulleies and no ports

Cool to see a nice group of fast Mustangs at the track
 

---

Posted by TURBOGT (Member # 234) on :
 

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by TURBOGT:
Great day for drag racing. I ran a best of 11.69 at 120mph on my second pass. I ran over a second quicker and 8mph more than my last time out 3 months ago. Stats on my car:

'93 red GT black interior
Art Carr AOD 9" non-lockup converter full manual valve body transbrake
stock driveshaft 3.55 gears
bone stock 164k throttle body to oil pan 302
homemade turbo kit
15psi T-67 / .96 exhaust housing
race weight with driver 3600lbs

I raced a couple of Z06's that day and beat them by at least 4 cars, that felt good I'm going to up the boost to 20psi and see what happens. I already have a new motor getting built so why not

---

Hey man cobgrats on the #'s

Those were my buddy's in the Z06's you were beating up on lol. It's ok cuz they weren't running very well....most need a need clutch.

Anyway your car sounds nice with the turbo and i'm sure i got 1 of your 11 sec runs on vid.

The white vert and torch red 03/04 Cobra's were my buddies as well. They had really good days running mid 11's w/ only upper pulleies and no ports

Cool to see a nice group of fast Mustangs at the track

---

Those cobras were running really strong My buddy who came up with me went an 11.82 @ 122 granny shifting his '03 cobra. Those motors make great power. You wouldn't by any chance be able to post the vid up?
 

---

Posted by 3xblack GT (Member # 1185) on :
 
i can see if he can upload the video, and i'll post it here for every1 to see
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by TURBOGT:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by TURBOGT:
Great day for drag racing. I ran a best of 11.69 at 120mph on my second pass. I ran over a second quicker and 8mph more than my last time out 3 months ago. Stats on my car:

'93 red GT black interior
Art Carr AOD 9" non-lockup converter full manual valve body transbrake
stock driveshaft 3.55 gears
bone stock 164k throttle body to oil pan 302
homemade turbo kit
15psi T-67 / .96 exhaust housing
race weight with driver 3600lbs

I raced a couple of Z06's that day and beat them by at least 4 cars, that felt good I'm going to up the boost to 20psi and see what happens. I already have a new motor getting built so why not

---

Hey man cobgrats on the #'s

Those were my buddy's in the Z06's you were beating up on lol. It's ok cuz they weren't running very well....most need a need clutch.

Anyway your car sounds nice with the turbo and i'm sure i got 1 of your 11 sec runs on vid.

The white vert and torch red 03/04 Cobra's were my buddies as well. They had really good days running mid 11's w/ only upper pulleies and no ports

Cool to see a nice group of fast Mustangs at the track

---

Those cobras were running really strong My buddy who came up with me went an 11.82 @ 122 granny shifting his '03 cobra. Those motors make great power. You wouldn't by any chance be able to post the vid up?

---

1 of my buds just sent me this link with a 1 of yours runs in there against the White Vert.

Hope this works for ya


http://www.youtube.com/watch?v=sp7bDqoxu84

p.s. What does your buddy's Cobra have mod wise?

[ December 05, 2006, 10:37 AM: Message edited by: TRIXSNK ]
 

---

Posted by 98slowhoe 'FIFTYLX' (Member # 895) on :
 
those guys with the Z06's what kind of rear tire are they running and what kind of 60Ft are they getting with them.
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by 98slowhoe 'FIFTYLX':
those guys with the Z06's what kind of rear tire are they running and what kind of 60Ft are they getting with them.

---

Frank

The Black Z06 was on BFG's and the Silver Z06 was in Nitto's.

I've been trying to help them get a good launch technique and i believe they have gotten them into the 1.7x's.

The Silver one was drivin by a friend of mine (Naz)but does not own the car. Plus it has a bunch of stereo stuff and is slammed

The Black one (Folsomz06)is Dale's car and he might have gotten it into the high 1.6x's but i'm not 100% sure he may chime in to verify. I'm sure he doesn't mind me saying either that it's got a shot on it but he needs a clutch and new TOB. Sean04 put the kit on for him.
 

---

Posted by TURBOGT (Member # 234) on :
 

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by TURBOGT:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by TURBOGT:
Great day for drag racing. I ran a best of 11.69 at 120mph on my second pass. I ran over a second quicker and 8mph more than my last time out 3 months ago. Stats on my car:

'93 red GT black interior
Art Carr AOD 9" non-lockup converter full manual valve body transbrake
stock driveshaft 3.55 gears
bone stock 164k throttle body to oil pan 302
homemade turbo kit
15psi T-67 / .96 exhaust housing
race weight with driver 3600lbs

I raced a couple of Z06's that day and beat them by at least 4 cars, that felt good I'm going to up the boost to 20psi and see what happens. I already have a new motor getting built so why not

---

Hey man cobgrats on the #'s

Those were my buddy's in the Z06's you were beating up on lol. It's ok cuz they weren't running very well....most need a need clutch.

Anyway your car sounds nice with the turbo and i'm sure i got 1 of your 11 sec runs on vid.

The white vert and torch red 03/04 Cobra's were my buddies as well. They had really good days running mid 11's w/ only upper pulleies and no ports

Cool to see a nice group of fast Mustangs at the track

---

Those cobras were running really strong My buddy who came up with me went an 11.82 @ 122 granny shifting his '03 cobra. Those motors make great power. You wouldn't by any chance be able to post the vid up?

---

1 of my buds just sent me this link with a 1 of yours runs in there against the White Vert.

Hope this works for ya


http://www.youtube.com/watch?v=sp7bDqoxu84

p.s. What does your buddy's Cobra have mod wise?

---

quote:

---

Originally posted by TURBOGT:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by TURBOGT:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by TURBOGT:
Great day for drag racing. I ran a best of 11.69 at 120mph on my second pass. I ran over a second quicker and 8mph more than my last time out 3 months ago. Stats on my car:

'93 red GT black interior
Art Carr AOD 9" non-lockup converter full manual valve body transbrake
stock driveshaft 3.55 gears
bone stock 164k throttle body to oil pan 302
homemade turbo kit
15psi T-67 / .96 exhaust housing
race weight with driver 3600lbs

I raced a couple of Z06's that day and beat them by at least 4 cars, that felt good I'm going to up the boost to 20psi and see what happens. I already have a new motor getting built so why not

---

Hey man cobgrats on the #'s

Those were my buddy's in the Z06's you were beating up on lol. It's ok cuz they weren't running very well....most need a need clutch.

Anyway your car sounds nice with the turbo and i'm sure i got 1 of your 11 sec runs on vid.

The white vert and torch red 03/04 Cobra's were my buddies as well. They had really good days running mid 11's w/ only upper pulleies and no ports

Cool to see a nice group of fast Mustangs at the track

---

Those cobras were running really strong My buddy who came up with me went an 11.82 @ 122 granny shifting his '03 cobra. Those motors make great power. You wouldn't by any chance be able to post the vid up?

---

1 of my buds just sent me this link with a 1 of yours runs in there against the White Vert.

Hope this works for ya


http://www.youtube.com/watch?v=sp7bDqoxu84

p.s. What does your buddy's Cobra have mod wise?

---

Thanks for the vid! My buddy has:

bassani longtube headers with high flow cats
smaller pulley
MT Drag Radials
sct tune on race gas

---

Good stuff....no wonder he traps so high

How are his 60 ft times doing?
 

---

Posted by Bad Snake (Member # 7271) on :
 
I'm the one with the black 03 cobra that Turbo Gt ws talking about. I got my new best time sat. 11.87@122
Mods are 2.8, cai, kooks LT with cats, magnaflows. Running mt dr with RWTD tune.
 

---

Posted by folsomZ06 (Member # 6964) on :
 

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by 98slowhoe 'FIFTYLX':
those guys with the Z06's what kind of rear tire are they running and what kind of 60Ft are they getting with them.

---

Frank

The Black Z06 was on BFG's and the Silver Z06 was in Nitto's.

I've been trying to help them get a good launch technique and i believe they have gotten them into the 1.7x's.

The Silver one was drivin by a friend of mine (Naz)but does not own the car. Plus it has a bunch of stereo stuff and is slammed

The Black one (Folsomz06)is Dale's car and he might have gotten it into the high 1.6x's but i'm not 100% sure he may chime in to verify. I'm sure he doesn't mind me saying either that it's got a shot on it but he needs a clutch and new TOB. Sean04 put the kit on for him.

---

quote:

---

Originally posted by Bad Snake:
I'm the one with the black 03 cobra that Turbo Gt ws talking about. I got my new best time sat. 11.87@122
Mods are 2.8, cai, kooks LT with cats, magnaflows. Running mt dr with RWTD tune.

---

Glad to see ya showed your face around here
 

---

Posted by Bad Snake (Member # 7271) on :
 
Had to make shure that you were keepin' the story straight.

[ December 06, 2006, 08:21 PM: Message edited by: Bad Snake ]
 

---

Posted by Yellow94GT (Member # 431) on :
 

quote:

---

Originally posted by speeddhb:
Wow! That was a lot of fun! I will never go out there on a Wednesday again. I could have hot lapped the car if I wanted to on TNT. Money well spent. There was a lot of fast 03/04 cobras. I don't think I saw one that was running slower than high 11's. Just in case anybody wants to know I got the stock SD 87 to run a 13.26 @ 103 with a crappy 1.91 60' , and the only reason I got 103 out of it is because of the 60 deg weather and letting it cool down for about 40 minutes before making a run. If anybody wants to chime in on how to get better 60's let me know! I ditched the front sway bar, put 4cyl springs on it, solid lowers, double adj uppers, and pinion set @ -3. Thanks a lot Kevin for your help!

---

Was your car the blue LX on slicks? If so, nice car man. Also, you and my buddy, Jackpine50, would be a great race. His car has gone 13.3 @ 103 on a wed. night race. Its mostly stock SD car. Only has O/R exhaust, gears and race crank pulley.
 

---

Posted by 98slowhoe 'FIFTYLX' (Member # 895) on :
 

quote:

---

Originally posted by Yellow94GT:

quote:

---

Originally posted by speeddhb:
Wow! That was a lot of fun! I will never go out there on a Wednesday again. I could have hot lapped the car if I wanted to on TNT. Money well spent. There was a lot of fast 03/04 cobras. I don't think I saw one that was running slower than high 11's. Just in case anybody wants to know I got the stock SD 87 to run a 13.26 @ 103 with a crappy 1.91 60' , and the only reason I got 103 out of it is because of the 60 deg weather and letting it cool down for about 40 minutes before making a run. If anybody wants to chime in on how to get better 60's let me know! I ditched the front sway bar, put 4cyl springs on it, solid lowers, double adj uppers, and pinion set @ -3. Thanks a lot Kevin for your help!

---

Was your car the blue LX on slicks? If so, nice car man. Also, you and my buddy, Jackpine50, would be a great race. His car has gone 13.3 @ 103 on a wed. night race. Its mostly stock SD car. Only has O/R exhaust, gears and race crank pulley.

---

I poop on Jackpine5.0
 

---

Posted by speeddhb (Member # 6593) on :
 
Yeah, it was the midnight blue lx on Weld draglite's and MT 8.5 slicks! Mine is almost stock, except for exhuast(w/ cats) and gears(3.73's) and all of the smog equipment! No short belt either! It has some suspension stuff though. The car really feels like it wants to be launched off of the rev limiter. May be i'll get those 60's down to a respectable time. Like 1.7's not 1.9 or 2.0's
 

---

Posted by Yellow94GT (Member # 431) on :
 

quote:

---

Originally posted by speeddhb:
Yeah, it was the midnight blue lx on Weld draglite's and MT 8.5 slicks! Mine is almost stock, except for exhuast(w/ cats) and gears(3.73's) and all of the smog equipment! No short belt either! It has some suspension stuff though. The car really feels like it wants to be launched off of the rev limiter. May be i'll get those 60's down to a respectable time. Like 1.7's not 1.9 or 2.0's

---

You are running solid bushings on your uppers and lowers? If so, your pinion angle should be set around -1 degrees. Also, what was your launch RPM and tire pressure? Let us know when your going to be out at the track again.
 

---

Posted by speeddhb (Member # 6593) on :
 
No! The lowers have polyurethane bushings at each end. The uppers have heim joints on the body attachment. But On the axle end (eyelet upper on axle) I have new rubber bushings. I know when I put in the Double Ajustable uppers in and set the pinion @ -3 the car hooked liked crazy, even on 235-60 15 drag radials. That's why I think I am not leaving with enough RPM. I tried 4,000 on the first luanch. then I tried increasing it by about 500 RPm on the next couple of runs. The last, and best 60 (1.91) I just stuck my foot in the throttle (I'm guessing 4,800). I need a 12 sec timeslip on a stock SD car!!!!!!!!
 

---

Posted by speeddhb (Member # 6593) on :
 
Tire pressure was 11 psi
 

---

Posted by SmokinLX (Member # 1684) on :
 
Wheather is holding up here in the east bay. If someone in the sac area could give an update tonight or even tomorrow morning it would be appreciated.
 

---

Posted by Yellow94GT (Member # 431) on :
 

quote:

---

Originally posted by SmokinLX:
Wheather is holding up here in the east bay. If someone in the sac area could give an update tonight or even tomorrow morning it would be appreciated.

---

Hey Mark, if you want to know about the weather here today, it is excellent! But today is the 16th not the 2nd.
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by Yellow94GT:

quote:

---

Originally posted by SmokinLX:
Wheather is holding up here in the east bay. If someone in the sac area could give an update tonight or even tomorrow morning it would be appreciated.

---

Hey Mark, if you want to know about the weather here today, it is excellent! But today is the 16th not the 2nd.

---

Weather's a bit gloomy but doesn't look like rain is in sight.

Drew you bringing any of the Cobra's out?

I'm goig back up to Tahoe tomorrow morning so no racing this weekend ..........

By the way tell me what you think of the truck i posted in the general section?

Thanks
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Yellow94GT:

quote:

---

Originally posted by SmokinLX:
Wheather is holding up here in the east bay. If someone in the sac area could give an update tonight or even tomorrow morning it would be appreciated.

---

Hey Mark, if you want to know about the weather here today, it is excellent! But today is the 16th not the 2nd.

---

Weather's a bit gloomy but doesn't look like rain is in sight.

Drew you bringing any of the Cobra's out?

I'm goig back up to Tahoe tomorrow morning so no racing this weekend ..........

By the way tell me what you think of the truck i posted in the general section?

Thanks

---

Hope to see some of You guy's there.
 

---