This is topic TNT Sat. Nov. 18th Anyone????? in forum Drag Racing at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=001492

---

Posted by TRIXSNK (Member # 2844) on :
 
I'll be out there once again going for that 10 sec slip

[ November 16, 2006, 07:51 PM: Message edited by: TRIXSNK ]
 

---

Posted by SmokinLX (Member # 1684) on :
 
You mean december 11th?
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by SmokinLX:
You mean december 11th?

---

I'm trippin Mark.....long ass day of inspecting womens private parts will do that to a man

Think you'll have the rocker problem fixed?
 

---

Posted by SmokinLX (Member # 1684) on :
 
YEAH I will definatley be ready. Sound's like fun as long as the wheather hold's out.
 

---

Posted by TRIXSNK (Member # 2844) on :
 
Got some new rubber so i'm all set!

Just need to fill'er up with a little VP 100
 

---

Posted by RED89GT (Member # 7212) on :
 
How did it go?
 

---

Posted by Daniel50 (Member # 5629) on :
 
it was the day of the turbo silverado's and nsx's.
 

---

Posted by Lilghoust (Member # 20) on :
 
I got to run a eaton charged silverado. I beat his 12.7 to my 12.5 right before I left. It wasnt a good outing for me. I was wheel hopping all over the place and missed 3rd on my best 60 ft run. Plus the printing machine stopped working so I couldn't get all of my timeslips.
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by Daniel50:
it was the day of the turbo silverado's and nsx's.

---

You can say that again

My car went 11.42 at the highest mph yet 128

Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.

Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.

Need to see where it's coming from
 

---

Posted by Daniel50 (Member # 5629) on :
 

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:
it was the day of the turbo silverado's and nsx's.

---

You can say that again

My car went 11.42 at the highest mph yet 128

Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.

Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.

Need to see where it's coming from

---

quote:

---

Originally posted by Daniel50:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:
it was the day of the turbo silverado's and nsx's.

---

You can say that again

My car went 11.42 at the highest mph yet 128

Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.

Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.

Need to see where it's coming from

---

maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure

---

Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.

Plenty of others going deep into the 10's with the IRS.

I really hope i just knocked off a wheel wieght
and not much more......
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:
it was the day of the turbo silverado's and nsx's.

---

You can say that again

My car went 11.42 at the highest mph yet 128

Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.

Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.

Need to see where it's coming from

---

maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure

---

Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.

Plenty of others going deep into the 10's with the IRS.

I really hope i just knocked off a wheel wieght
and not much more......

---

quote:

---

Originally posted by SmokinLX:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:
it was the day of the turbo silverado's and nsx's.

---

You can say that again

My car went 11.42 at the highest mph yet 128

Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.

Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.

Need to see where it's coming from

---

maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure

---

Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.

Plenty of others going deep into the 10's with the IRS.

I really hope i just knocked off a wheel wieght
and not much more......

---

By the look's of Your trap speed You are making some good power! Any new's on the rear end? I am thinking about going on saturday december 2nd if everything goes as planned.

---

Mark

Hey bud i was lookin for ya all day lol.

Did the rocker prob keep you from making it out?

No word yet on the rear as i haven't even gotten back into the car since the outting at the track.

On the 128 mph pass everything went well it just hooked so well that it bogged down the motor a bit more than i'd like with a 4200 rpm launch......i'm just too pussy to launch the thing near 5000

Hope to be able to make it out with ya then but i'm also praying for rain so we can get this SNOWBOARDING SEASON started
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by SmokinLX:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:

quote:

---

Originally posted by TRIXSNK:

quote:

---

Originally posted by Daniel50:
it was the day of the turbo silverado's and nsx's.

---

You can say that again

My car went 11.42 at the highest mph yet 128

Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.

Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.

Need to see where it's coming from

---

maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure

---

Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.

Plenty of others going deep into the 10's with the IRS.

I really hope i just knocked off a wheel wieght
and not much more......

---

By the look's of Your trap speed You are making some good power! Any new's on the rear end? I am thinking about going on saturday december 2nd if everything goes as planned.

---

Mark

Hey bud i was lookin for ya all day lol.

Did the rocker prob keep you from making it out?

No word yet on the rear as i haven't even gotten back into the car since the outting at the track.

On the 128 mph pass everything went well it just hooked so well that it bogged down the motor a bit more than i'd like with a 4200 rpm launch......i'm just too pussy to launch the thing near 5000

Hope to be able to make it out with ya then but i'm also praying for rain so we can get this SNOWBOARDING SEASON started

---

Yeah I am waiting for rocker stud's to be delivered. I got a new push rod "Thank's Bill" so I am set as soon as the new stud's arrive. You should do the level 5 axel's & whatever else u IRS guy's need to do so You can launch where You need to. Do You know what RPM You are crossing the line at? I am rite on the rev limiter "6500" now with Mine so I might try to stuff some 28 inch tall tires on next time.
 

---

Posted by TRIXSNK (Member # 2844) on :
 
What gear are you running out back?

I don't remember the exact rpm but i've got a bit more before redline that's for sure but watching the speedo go past 130 was nice to feel ...... it's just slowing down that becoming a little tough

I'm one of those guys that won't put level 5's until i break a stock shaft

Plus there are plenty of guys going deep in the 1.5's and lower on the IRS and some still with stock shafts.

IRS for life lol
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by TRIXSNK:
What gear are you running out back?

I don't remember the exact rpm but i've got a bit more before redline that's for sure but watching the speedo go past 130 was nice to feel ...... it's just slowing down that becoming a little tough

I'm one of those guys that won't put level 5's until i break a stock shaft

Plus there are plenty of guys going deep in the 1.5's and lower on the IRS and some still with stock shafts.

IRS for life lol

---

I have 373's in mine. Well if You are waiting to break something then try a 5000 rpm launch . I put My foot to the floor with the tranny brake on and launched at over 5000 rpm at the track last time & the car left real hard but with the wheelspin I did'nt gain anything compared to My normal launch. Seem's like I am stuck at 1.60 60 foot's with My ET Street's for now.
 

---

Posted by cummins (Member # 5931) on :
 
Don't give up on IRS yet! I'm on completely stock irs suspension with stock everything and I've cut high 1.3's a few times and I average around 1.42! All stock completely unmodified from the factory!
 

---

Posted by 98slowhoe 'FIFTYLX' (Member # 895) on :
 

quote:

---

Originally posted by cummins:
Don't give up on IRS yet! I'm on completely stock irs suspension with stock everything and I've cut high 1.3's a few times and I average around 1.42! All stock completely unmodified from the factory!

---