This is topic Drag Car Weight Distribution/Castor &Camber in forum Drag Racing at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=001358
Posted by cobra500 (Member # 1349) on
:
Can anyone tell me where I can get information about the proper weight distribution for a drag car? That's CG location both forward and back and vertically.
Also what is the best settings for Castor and Camber?
Posted by Cobra5.0Jeep (Member # 1482) on
:
anyone?
Posted by season'd 88 (Member # 169) on
:
[ November 06, 2006, 12:45 AM: Message edited by: season'd 88 ]
Posted by eljefe (Member # 1753) on
:
nm.
[ January 31, 2006, 07:08 PM: Message edited by: eljefe ]
Posted by Team SOLO (Member # 722) on
:
Depending on how serious you are, you may want to invest in a book/video on this. Jerry Bickel has a book on suspension geometry and theory. Check out 'Module A' at: http://www.jerrybickel.com/info.html
There is a lot more to tuning a drag car besides weight ratio, CG, caster, and camber. You will also want to consider setting ride height, bumpsteer, pre-load, pinion angle, etc.
Posted by 50Reasons (Member # 6452) on
:
good to know
Fueled by Ford Mustang Owners
on CaliforniaFords.com