This is topic combos in forum Drag Racing at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=001355

Posted by icall_666 (Member # 6417) on :
 
what's the best combos for a 5.0?? need info!!
 
Posted by HaulinAssMaro (Member # 541) on :
 
quote:
Originally posted by icall_666:
what's the best combos for a 5.0?? need info!!

thats a preety broad question.maybe giving just a LITTLE more info would help
 
Posted by eljefe (Member # 1753) on :
 
two t67 turbo's and about 40psi, sounds like a good combo to me [Wink] [burnout]
 
Posted by SONIC LX (Member # 5850) on :
 
yeah just get some aluminum heads, a cam, an intake, cold air, pulleys, injectors, mass air, throotle body, gears, full exhaust, and a blower! you wont be dissapointed [patriot]
 
Posted by putter (Member # 4253) on :
 
Hella money and a lot of time. yes? no?
 
Posted by SONIC LX (Member # 5850) on :
 
sure but youll need all that is on that list and more to make decent power with a blower on a fox. what would you reccomend [Confused]
 
Posted by 88DroptopGT (Member # 2535) on :
 
I know! The best combo for 5.0 are the FAST ones!

VROOOOOOOOOOOM. [burnout]
 
Posted by JohnB (Member # 969) on :
 
A stroked 351w, supercharged...with a few other boltons... [Wink]
 
Posted by Hungry Hippo (Member # 537) on :
 
some flows
 
Posted by SmokinLX (Member # 1684) on :
 
Go with the holley the holley HCI setup. Then slap a S-trim on there and upgrade Your fuel,ignition, and exhaust system's! Then pray Your tranny, rear end, and the rest of Your drivetrain is up to the task. Oh and flow's. [Big Grin]
 
Posted by twisted54 (Member # 1981) on :
 
quote:
Originally posted by SmokinLX:
Go with the holley the holley HCI setup. Then slap a S-trim on there and upgrade Your fuel,ignition, and exhaust system's! Then pray Your tranny, rear end, and the rest of Your drivetrain is up to the task. Oh and flow's. [Big Grin]

Add some Welds onto that too.
 
Posted by SmokinLX (Member # 1684) on :
 
quote:
Originally posted by twisted54:
quote:
Originally posted by SmokinLX:
Go with the holley the holley HCI setup. Then slap a S-trim on there and upgrade Your fuel,ignition, and exhaust system's! Then pray Your tranny, rear end, and the rest of Your drivetrain is up to the task. Oh and flow's. [Big Grin]

Add some Welds onto that too.
Shit there is probably 10 or more item's on the list to get a car up to speed.
[burnout]
 
Posted by Luke87GT (Member # 21) on :
 
K*N and 1 chamber Flowmasters. You'll be the coolest sounding cat in all of East Oakland!
lol
 
Posted by icall_666_yellow94GT (Member # 6417) on :
 
ok i got magnapacks mufflers side exit, underdrive pullys, steeda shifter, cold air, MSD ignition, off road X.
i want to do more mods but dont want to do any big mods like cam or heads becuz im buying a new motor in about 4 months.
 
Posted by two-gun kid (Member # 5891) on :
 
quote:
Originally posted by icall_666_yellow94GT:
ok i got magnapacks mufflers side exit, underdrive pullys, steeda shifter, cold air, MSD ignition, off road X.
i want to do more mods but dont want to do any big mods like cam or heads becuz im buying a new motor in about 4 months.

whats with the screen name?
 
Posted by SmokinLX (Member # 1684) on :
 
quote:
Originally posted by icall_666_yellow94GT:
ok i got magnapacks mufflers side exit, underdrive pullys, steeda shifter, cold air, MSD ignition, off road X.
i want to do more mods but dont want to do any big mods like cam or heads becuz im buying a new motor in about 4 months.

Why not upgrade something like the fuel system which will need to be done with the new engine anyway?
 
Posted by rico91stang (Member # 2389) on :
 
How about just slap a single turbo kit from either b&g turbo, ptk, or Hp and have more than enough power for a 10 sec slip for cheaper than the HCI full exhaust essentially basic bolt on approach everyone (even me) goes for.


Ah to do it all again. [Frown]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com