This is topic Just Got a Dyno Today... in forum Drag Racing at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=001001

---

Posted by SIKKSTANG (Member # 1210) on :
 
I Got Dynoed at Apex Motorsports and my best pull was 249.1 RWHP and 281.4 ft/lbs Torque. Am I runnin a good time for the power I'm puttin down to the ground?

1/4 mile: 13.5 @ 103
60': 1.9
 

---

Posted by SIKKSTANG (Member # 1210) on :
 
I will be getting a Steeda Timing Adjuster, Lower/Upper Control Arms, MSD Ignition, and Headers within the next six months. What do you guys think my HP will be and what times should I be expecting...
Thanx,
Alex
 

---

Posted by shade- (Member # 298) on :
 
you could still probably lose another 5 to 7 tenths in ET with a proper drag slick and your 4.10s, but mph is about right. Probably 3 to 5 tenths to go if you keep those 315 drag radials on. Good HP #'s for near stock!
 

---

Posted by SIKKSTANG (Member # 1210) on :
 
My friend keeps telling me to go and get my car tuned because he says I'm not getting the full potential of my mods without tuning it. I just want to know if this is true and if I do need to go get my car tuned and where.
 

---

Posted by bunchmyfunky (Member # 360) on :
 
If your A/F looks good then I wouldn't bother with a dyno tune. With the mods that you have and are planning to get you still wont need a tune.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com