This is topic My91Gt in forum Drag Racing at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=000187
Posted by Green91gt (Member # 776) on
:
I wanna know how much rwhp you think I have?
My 1991 Auto Gt comes stock with 225rwhp.
I have installed BBK Equal Length headers, BBK off road x-pipe,dual chamber flows dumped, and ford motorsport ignition wires.The rest is stock and its an automatiRWHP watcha think?
quarter mile, watcha think?
Posted by TRY2PAZ (Member # 97) on
:
Your car stock comes with about 195rwhp. The 225 you are refering 2 is flywheel. With your mods, I would say around 210 rwhp.
1/4 times- Good driver 14.0
Posted by shade-tree (Member # 298) on
:
A T5 5.0 is lucky to have 190 as a 'stocker', the AOD is even luckier to have 180.
These figures at the rear wheels, of course.
The exhaust mods should have you up around 185 rwhp, IMHO.
Posted by st5150 (Member # 51) on
:
Under drive pullies will help you out a lot.When my car was an AOD, I made 200 rwhp with the following:
2 chamber flow master mufflers
12 degrees timing
electric fan
underdrive pullies
K&N in the stock air box with the silencer removed.
I thought it was makingpretty good HP for its mods. It pushed 3440 lbs down the track at just under 96 mph and mid 14's in summer heat.
Posted by 91sleeper (Member # 779) on
:
The 1991 mustangs dyno at 225rwhp at 4500rpm
Posted by shade-tree (Member # 298) on
:
quote:
Originally posted by 91sleeper:
The 1991 mustangs dyno at 225rwhp at 4500rpm
lol
Posted by 91sleeper (Member # 779) on
:
i guess so well i got pulleys installed now and it did make a big difference. Thanks for the advice