This is topic T5z cost????? in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=063052
Posted by Marcos123 (Member # 13472) on :
 
Okay so I'm looking for a used t5z and I was wondering what a good price would be and if any body happen to have one laying around let me know
 
Posted by i (Member # 12534) on :
 
8-1500
 
Posted by NEIGHT (Member # 8741) on :
 
Are they even worth it? Never had one but aren't they barely stronger over stock T5's?
 
Posted by racsirx (Member # 1710) on :
 
The last used T-5z I had I got $1200 for it
 
Posted by i (Member # 12534) on :
 
quote:
Originally posted by NEIGHT:
Are they even worth it? Never had one but aren't they barely stronger over stock T5's?
Nope, I would save up and get a used Tremec Tko's or buy a new one. May be get a T-5 built but it does cost $$$, damn near a brand new Tremec would cost new.
 
Posted by i (Member # 12534) on :
 
quote:
Originally posted by racsirx:
The last used T-5z I had I got $1200 for it
93 cobra or off the sn95 Cobras you're parting out?
I wished the sn95 t5 could bolt up into fox... I know know you can buy a adapter plate.... Sn95 t5 can handle little more than a fox t5.
 
Posted by 166 Merlo (Member # 1549) on :
 
quote:
Originally posted by i:
quote:
Originally posted by racsirx:
The last used T-5z I had I got $1200 for it
93 cobra or off the sn95 Cobras you're parting out?
I wished the sn95 t5 could bolt up into fox... I know know you can buy a adapter plate.... Sn95 t5 can handle little more than a fox t5.
Y don't u just change the input shaft? Or is that why the holda lil more power?
 
Posted by i (Member # 12534) on :
 
quote:
Originally posted by 166 Merlo:
quote:
Originally posted by i:
quote:
Originally posted by racsirx:
The last used T-5z I had I got $1200 for it
93 cobra or off the sn95 Cobras you're parting out?
I wished the sn95 t5 could bolt up into fox... I know know you can buy a adapter plate.... Sn95 t5 can handle little more than a fox t5.
Y don't u just change the input shaft? Or is that why the holda lil more power?
You're actually correct. The adapter is for old schools. They handle more torque; don't know the exact numbers but probably handle just a slight margin.
 
Posted by SIC9250 (Member # 8216) on :
 
Had 200+ mid 11 sec passes on my t5z,powershifted the nuts off it too,solid trans no doubt blows t5's out the water..
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by i:
quote:
Originally posted by racsirx:
The last used T-5z I had I got $1200 for it
93 cobra or off the sn95 Cobras you're parting out?
I wished the sn95 t5 could bolt up into fox... I know know you can buy a adapter plate.... Sn95 t5 can handle little more than a fox t5.
They came from my 94-95 Cobras, you can bolt into a fox, just use 94-95 bellhousing
 
Posted by NEIGHT (Member # 8741) on :
 
quote:
Originally posted by racsirx:
quote:
Originally posted by i:
quote:
Originally posted by racsirx:
The last used T-5z I had I got $1200 for it
93 cobra or off the sn95 Cobras you're parting out?
I wished the sn95 t5 could bolt up into fox... I know know you can buy a adapter plate.... Sn95 t5 can handle little more than a fox t5.
They came from my 94-95 Cobras, you can bolt into a fox, just use 94-95 bellhousing
This is how mine is setup on my fox. Only downside is my long tubes hit the bell housing.
 
Posted by i (Member # 12534) on :
 
quote:
Originally posted by racsirx:
quote:
Originally posted by i:
quote:
Originally posted by racsirx:
The last used T-5z I had I got $1200 for it
93 cobra or off the sn95 Cobras you're parting out?
I wished the sn95 t5 could bolt up into fox... I know know you can buy a adapter plate.... Sn95 t5 can handle little more than a fox t5.
They came from my 94-95 Cobras, you can bolt into a fox, just use 94-95 bellhousing
Never new that. Thank for the info
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com