This is topic 86 notch 17x10.5 315s rubbing question in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=062351
Posted by notch306 (Member # 12061) on :
 
I installed 315s on my car and the inside of my tire is touch the inner fender well. If i beat the fender well will that help? Or what should i do? - - -
 
Posted by 510.86.notch (Member # 9892) on :
 
Yes that is what's needed.good to see my old car still alive.
 
Posted by ed650 (Member # 9897) on :
 
86 on da machs has 315s on his and all he did was beat the inner fender. What about a thin spacer?
 
Posted by notch306 (Member # 12061) on :
 
quote:
Originally posted by 510.86.notch:
Yes that is what's needed.good to see my old car still alive.
Im trying to get it done bro if i decide to sell it ill let u know first
 
Posted by notch306 (Member # 12061) on :
 
quote:
Originally posted by ed650:
86 on da machs has 315s on his and all he did was beat the inner fender. What about a thin spacer?
Im going to try to beat the inner fender first i think that is what needs to be done
 
Posted by i (Member # 12534) on :
 
Nice car! Have you tried rolling them?
 
Posted by a302juGRnot (Member # 10163) on :
 
use a small spacer and roll the fenders till its as flat as possible

[ 2015-08-01, 03:41 AM: Message edited by: a302juGRnot ]
 
Posted by 510.86.notch (Member # 9892) on :
 
quote:
Originally posted by a302juGRnot:
use a small spacer and roll the fenders till its as flat as possible
+1.this is also a option.
 
Posted by notch306 (Member # 12061) on :
 
quote:
Originally posted by i:
Nice car! Have you tried rolling them?
I rolled them already but its the inner fender well wall
 
Posted by 510.86.notch (Member # 9892) on :
 
quote:
Originally posted by notch306:
quote:
Originally posted by i:
Nice car! Have you tried rolling them?
I rolled them already but its the inner fender well wall
A small spacer will bring the wheel out a little.if you have room on the outside.if not you have to beat the inner wheel well.mostly where those two seems meet next to shock.they will cut your tire off.then work your way up from there.theres not much room in there to swing a hammer also.
 
Posted by STREETFIGHTER50 (Member # 2973) on :
 
BFH will do the trick
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com