This is topic need some assistance in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=061230

Posted by 9cobrasvt8 (Member # 11078) on :
 
I need a 7/8 inch hole drilled through my firewall for my temp sensor and both drills i have arent capable of doing it, who can i go to in sac to get the hole drilled? Or of i drill in stages will it work?

[ 2014-08-27, 01:45 PM: Message edited by: 9cobrasvt8 ]
 
Posted by 5.t0es (Member # 5864) on :
 
youd probably need a 1/2" and you have a 3/8" drive, but yes,i would pilot hole in stages until I hit desired hole diameter.
 
Posted by 9cobrasvt8 (Member # 11078) on :
 
quote:
Originally posted by 5.t0es:
youd probably need a 1/2" and you have a 3/8" drive, but yes,i would pilot hole in stages until I hit desired hole diameter.

Ya ive got a 1/2 inch and 3/8 inch drill, the 1/2 inch doesnt have enough power to just start with the 7/8 bit so ill start with smaller and work my way up, thank you
 
Posted by 5.t0es (Member # 5864) on :
 
no problem [patriot]
 
Posted by jph331 (Member # 665) on :
 
You can buy a unibit which is a stepped drill bit or a 7/8 hole saw.


http://www.harborfreight.com/2-piece-titanium-nitride-coated-high-speed-steel-step-drills-96275.html
 
Posted by SIC9250 (Member # 8216) on :
 
This^
 
Posted by 9cobrasvt8 (Member # 11078) on :
 
quote:
Originally posted by jph331:
You can buy a unibit which is a stepped drill bit or a 7/8 hole saw.


http://www.harborfreight.com/2-piece-titanium-nitride-coated-high-speed-steel-step-drills-96275.html

So you just use these as normal bits im assuming?
 
Posted by 9cobrasvt8 (Member # 11078) on :
 
Thanks for the advice guys, i bought the bits at harbor freight and got the hole drilled very easily [patriot]
 -

[ 2014-08-28, 10:15 PM: Message edited by: 9cobrasvt8 ]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com