This is topic Transmission whine in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=060860
Posted by 86_on_DA_machs (Member # 11083) on :
 
So I just rebuild my transmission put it back on the car.i fix my blown second gear but now I have a slight whine. Can it be the oil???

[ 2014-06-10, 10:34 AM: Message edited by: 86_on_DA_machs ]
 
Posted by Wht86drop (Member # 12104) on :
 
What kind if fluid did you use? And you sure it's not the rear end
 
Posted by 86_on_DA_machs (Member # 11083) on :
 
quote:
Originally posted by Wht86drop:
What kind if fluid did you use? And you sure it's not the rear end
Don't think so. I didn't do it before. I started the car on jacks and went through the gears. And it was good then I started it the second time on jacks and noticed it. Valvoline dex/merc the red bottle.
 
Posted by 50Reasons (Member # 6452) on :
 
Does it have enough ATF in it?
 
Posted by 86_on_DA_machs (Member # 11083) on :
 
Yeah it does
 
Posted by Wht86drop (Member # 12104) on :
 
Add some Lucas. If it goes away maybe you didn't torque something or maybe something else is bad too

[ 2014-06-10, 08:35 PM: Message edited by: Wht86drop ]
 
Posted by 86_on_DA_machs (Member # 11083) on :
 
quote:
Originally posted by Wht86drop:
Add some Lucas. If it goes away maybe you didn't torque something or maybe something else is bad too
Ima take it out and add another shim. I tryed the Lucas but no luck
 
Posted by 2T0NE (Member # 4216) on :
 
Congrats ur transmission is supercharged
 
Posted by 135.0 (Member # 4992) on :
 
quote:
Originally posted by 2T0NE:
Congrats ur transmission is supercharged
Termi tranny ftw
 
Posted by Wht86drop (Member # 12104) on :
 
Trial n error
 
Posted by Focussvt2002 (Member # 12460) on :
 
Did you measure the axil play of both the Main shaft and the cluster shaft? Other than a rebuild what has changed? Shifter, shifter handle or mount? Maybe the exhaust is hitting the cross member.
Good Luck.
 
Posted by 86_on_DA_machs (Member # 11083) on :
 
quote:
Originally posted by Focussvt2002:
Did you measure the axil play of both the Main shaft and the cluster shaft? Other than a rebuild what has changed? Shifter, shifter handle or mount? Maybe the exhaust is hitting the cross member.
Good Luck.
I think the main had a minor play but i didnt think it would make this much of a differance. so I'm thinking that my be my case. New bearings, races, blocker rings, washers, pretty much everything that comes in the kit.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com