This is topic wtf are people smoking these days cl add?¿ in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=059797

---

Posted by 88cobraclone (Member # 10958) on :
 
Fully built 6,500 doesn't even have aluminum heads? Lol better intake and stock cam ? Dude must be on drugs hard lol

http://sfbay.craigslist.org/eby/pts/4262335266.html

Wanted to send him an email but then again I don't wanna waist his time lol, plus it's his engine he can ask what he feels like its worth lmao

[ 2013-12-30, 08:35 PM: Message edited by: 88cobraclone ]
 

---

Posted by 135.0 (Member # 4992) on :
 
lol that place looks familiar
 

---

Posted by dean-93 (Member # 9401) on :
 
6500$ lol, dose it come with a free mustang attached to it?
 

---

Posted by POWERED BY FORD (Member # 9204) on :
 
Fully built with paint
 

---

Posted by 86_on_DD_machs (Member # 11083) on :
 
You guys don't understand, that red intake and the red bell housing are limited edition parts. There super rare
 

---

Posted by wilit (Member # 3367) on :
 
WTF? They painted the pressure plate? Also, since it's fuel injected, kinda weird they put the dipstick in the timing cover since it would most likely go into a car with a rear sump.
 

---

Posted by Duncan Motors (Member # 7045) on :
 
um yeah i built this motor lol. it was for a guys 240 drift car, and its fuel injected yes but will be running a front sump pan for the 240, bad ass motor fOR what hes doing, but i dont think he was thinking when posting it, he wanted 85 for the whole car WITH CAGE, FRONT ANGLE MODS, THIS MOTOR AND WHATS LISTED. the presure plate came that color its some 6 puck deal, and the color combo was to match his car at his request. the dip stick is also not cut down yet cause the pan hasnt been installed. give him a break lol
 

---

Posted by 88cobraclone (Member # 10958) on :
 

quote:

---

Originally posted by Duncan Motors:
um yeah i built this motor lol. it was for a guys 240 drift car, and its fuel injected yes but will be running a front sump pan for the 240, bad ass motor fOR what hes doing, but i dont think he was thinking when posting it, he wanted 85 for the whole car WITH CAGE, FRONT ANGLE MODS, THIS MOTOR AND WHATS LISTED. the presure plate came that color its some 6 puck deal, and the color combo was to match his car at his request. the dip stick is also not cut down yet cause the pan hasnt been installed. give him a break lol

---

Lol well he might wanna add the car with that price I got a fresh 302, eddy heads fully ported and polished 1.6 rr, custom grind cam, bbk long tubes, holley systemax II intake, 75mm throttle body 75mm bbk spacer, 30lb injectors for 2,500 you might wanna let him know his price is a little off about 5k off...
 

---

Posted by Duncan Motors (Member # 7045) on :
 
he bought every part new and paid to have tem machine shop in napa touch every ori part to where it was better than new, and reliable for high revs for long periods of time, it was very high in price regardless but nothing was second hand used and ran off of another vehicle, everything is well fully built zero miles. im not sure total amount but it was alot. i know u guys are looking at like man that's a stock crank, etc, but everything was checked for cracks , turned and micro polished than fully balanced along with the rest of the rotating assembly, the rods resized with arp, then also balanced, pistons pulled, balanced then back on, block line bored , center line decked, there really was no corners cut on any of the fancy or very thorough machine work like a top of the line motor use, this one was just with mostly stock parts.our only machine shop local i trust does work on like Ferrari type stuff all over the world and is a bit high in price but i trust his work. in the end he had a very reliable high reving v8, that should last years bouncing off the rev limiter that would of been more than enough in a lil 240 sx.
 

---

Posted by i (Member # 12534) on :
 

quote:

---

Originally posted by 86_on_DD_machs:
You guys don't understand, that red intake and the red bell housing are limited edition parts. There super rare

---

quote:

---

Originally posted by Beastly GT500 TVS:
he really is looking for a sucker to buy that motor

---

Ohh yeah!!!!! 6,500$ motor with a GT40 explorer intake! Hahahaha

Charles
 

---

Posted by TEXAS (Member # 11875) on :
 

quote:

---

Originally posted by KARATExxCHUCK:

quote:

---

Originally posted by Beastly GT500 TVS:
he really is looking for a sucker to buy that motor

---

Ohh yeah!!!!! 6,500$ motor with a GT40 explorer intake! Hahahaha

Charles

---