This is topic Finally got my 18x10 Bullits on my 68!! in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=059619

---

Posted by CRS24WILSON (Member # 9979) on :
 
stock suspension, with the explorer rearend conversion. I had to use 1 inch spacers and im running a 285/30/18. Very close fit and so far no rubbing...




 

---

Posted by 1FAST93NOTCH (Member # 10722) on :
 
It looks very good bro.
 

---

Posted by ECOboostin (Member # 4347) on :
 
Side pic please. Looks awesome.
 

---

Posted by SLOWBACK 67 (Member # 6348) on :
 
Are you running a 18 x 8 or 9 up front?
 

---

Posted by CRS24WILSON (Member # 9979) on :
 
I'll be running a 17x8 up front. I forgot to get a spacer for them, but as soon as I do I'll take a side shot

[ 2013-12-02, 08:21 AM: Message edited by: CRS24WILSON ]
 

---

Posted by COBRA50 (Member # 11614) on :
 
Looks bad ass
 

---

Posted by eldog68 (Member # 12928) on :
 
that's about the same clearance to the springs I have on mine. but im only running 18x 9.5. Will the tires tuck if you have weight/people in the back or does it hit the lip?
 

---

Posted by CRS24WILSON (Member # 9979) on :
 
I never have people in the back, and so far it hasn't hit... I've been over a few bumps too.
 

---

Posted by Duncan Motors (Member # 7045) on :
 
i got 03 cobras 18 by 10 or 10 1/2 with 285,s in the rear, 295 will fit as well. 9 inch wide in the front with one inch spacers. 9 inch set up to stock width with 1/8 inch spacers. i had to roll the inner lip, also got a panhard bar so its stays put. this is on my 67. congrats on the install and fitment they look awesome from the side and the rear lol
 

---

Posted by CRS24WILSON (Member # 9979) on :
 
Thanks.. the panhard bar is next on my list. I am halfway tempted to take a welding class because all of the stuff i wanna do will require welding. Everyone says to just buy a welder and learn yourself, but i know ill hurt myself...
 

---

Posted by Duncan Motors (Member # 7045) on :
 
lol not ur self. just practice alot with the same gauge material on your car. have fun!
 

---

Posted by nasty93 (Member # 8935) on :
 
Nice!
 

---

Posted by Wildfire532FB (Member # 1482) on :
 
Looks good.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com