This is topic My Classic Coupe Project (Warning Lots of Pics) in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=058078
Posted by Duncan Motors (Member # 7045) on
:
I just finished doing some chassis, body and a bit of interior work on her. If anyone wants more info I can get into it later. For now here are some progress pics.
[ 2013-05-16, 06:14 PM: Message edited by: Duncan Motors ]
Posted by Duncan Motors (Member # 7045) on
:
Posted by Duncan Motors (Member # 7045) on
:
Posted by x Raelsmar x (Member # 9804) on
:
Damn fine work.
Posted by 306calypsodrop (Member # 10881) on
:
quote:
Originally posted by x Raelsmar x:
Damn fine work.
+1
Posted by silver n black (Member # 8369) on
:
Damn good work might have to hit u up for some work on my rides
Posted by Wildfire532FB (Member # 1482) on
:
You should have taken an inch out of the seat plates, i did and i still hit my head into the headliner.
Posted by 166 Merlo (Member # 1549) on
:
Duncan vs. bwkelley
Dun dun dunnnnnunununuuuuuu...
Looks good so far
Posted by wilit (Member # 3367) on
:
quote:
Originally posted by Wildfire532FB:
You should have taken an inch out of the seat plates, i did and i still hit my head into the headliner.
'69 and '70 seat pans are about an inch shorter than earlier pans because they had hi-back seats. New pans are about $60 each.
Posted by Wildfire532FB (Member # 1482) on
:
quote:
Originally posted by wilit:
quote:
Originally posted by Wildfire532FB:
You should have taken an inch out of the seat plates, i did and i still hit my head into the headliner.
'69 and '70 seat pans are about an inch shorter than earlier pans because they had hi-back seats. New pans are about $60 each.
oh ok, you don't need to buy a new one though i just modded my old ones and welded them back in.
Posted by wilit (Member # 3367) on
:
quote:
Originally posted by Wildfire532FB:
quote:
Originally posted by wilit:
quote:
Originally posted by Wildfire532FB:
You should have taken an inch out of the seat plates, i did and i still hit my head into the headliner.
'69 and '70 seat pans are about an inch shorter than earlier pans because they had hi-back seats. New pans are about $60 each.
oh ok, you don't need to buy a new one though i just modded my old ones and welded them back in.
My metal fab skills are "developing." Not sure if I took an inch out of my pans, they'd be straight.
Fueled by Ford Mustang Owners
on CaliforniaFords.com