This is topic Went out for a cruise in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=055350
Posted by kleanstangz (Member # 11083) on :
 
So I went out for a early cruise after going to bed last night at 3 a.m due to installing springs isolators and control arms. An man I can tell a huge difference. Only thing missing is my cc plates which come in today.
 
Posted by NEIGHT (Member # 8741) on :
 
I have CC plates for a while now still haven't installed them kuz I don't exactly know how plus I don't wanna fuck up my alignment even more kuz its bad as it is now.
 
Posted by kleanstangz (Member # 11083) on :
 
quote:
Originally posted by NEIGHT:
I have CC plates for a while now still haven't installed them kuz I don't exactly know how plus I don't wanna fuck up my alignment even more kuz its bad as it is now.
I probably won't know either but pictures on google help and videos so I'll give it a shot you won't learn if you don't try
 
Posted by fredfifty (Member # 10320) on :
 
ive installed mine for the first time a few months ago. its not hard at all, a caveman can do it imo
 
Posted by 306calypsodrop (Member # 10881) on :
 
Its hella easy to install them bro jus after u done installing them go to big o tires for alinement and your good
 
Posted by kleanstangz (Member # 11083) on :
 
quote:
Originally posted by 306calypsodrop:
Its hella easy to install them bro jus after u done installing them go to big o tires for alinement and your good
Yeah cause right now my cars off a little bit but not to much. It's good to know it will be easy.
 
Posted by 1ST0KGT (Member # 10606) on :
 
I did my suspension work on my Gt before selling it and I never got CC plates haha, I had minor camber I'm the front but wasn't to bad like the ricers
 
Posted by fredfifty (Member # 10320) on :
 
oh and dont skimp on the strut to spindle bolts, torque those down to (iirc) 140 ft/lbs or the alignment shop will charge you, for them to do it (as happened in my case)...
 
Posted by kleanstangz (Member # 11083) on :
 
quote:
Originally posted by 1ST0KGT:
I did my suspension work on my Gt before selling it and I never got CC plates haha, I had minor camber I'm the front but wasn't to bad like the ricers
Ahaha Suck for the new owner easy 200 or new tires every some months
 
Posted by kleanstangz (Member # 11083) on :
 
quote:
Originally posted by fredfifty:
oh and dont skimp on the strut to spindle bolts, torque those down to (iirc) 140 ft/lbs or the alignment shop will charge you, for them to do it (as happened in my case)...
Thanks for the head up bro. I'll make sure to do that
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com