This is topic Who has a cage? in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=054695

Posted by LETHL 03 (Member # 5401) on :
 
So someone said that if you have a cage in your car, it's not a street car no more [Roll Eyes] [Confused]

So how many people have cages? I'm thinking of going to F.O.D to get a 6 or 8 point cage [patriot]
 
Posted by 02angrybird (Member # 11259) on :
 
There's nothing wrong with a street car having a cage. If someone is scared of a street car with a cage then that's their fault...
 
Posted by Duncan Motors (Member # 7045) on :
 
there's no law against it. i recommend it. but if u have a cage in your car, and you or your passengers don't have helmets or properly belted in. the cage can seriously fuck you up. there is cage padding that well help.
 
Posted by LETHL 03 (Member # 5401) on :
 
quote:
Originally posted by Duncan Motors:
there's no law against it. i recommend it. but if u have a cage in your car, and you or your passengers don't have helmets or properly belted in. the cage can seriously fuck you up. there is cage padding that well help.

Yup I agree. I like the way some cages look on some cars. Padding is a must IMO
 
Posted by SIC70STANG (Member # 4347) on :
 
Just Registered this one. Need a smog still.

 -
 
Posted by LETHL 03 (Member # 5401) on :
 
^^^^niiiiiiiice
 
Posted by Pure Stang (Member # 7251) on :
 
Jesus 50 point roll cage lol. That looks good.. Lethal for those that say that it's just an excuse not to run lol
 
Posted by 1ST0KGT (Member # 10606) on :
 
I too as well plan on caging as well, just a 4point though. I hit up iron50 and just waiting for a response.
 
Posted by Venomousnotch (Member # 8695) on :
 
I have a cage on my 89 notch and I haven't had no problems... [patriot] [patriot]
 
Posted by TACH2MX (Member # 9987) on :
 
I had a 12pt cage in my 87 coupe, set up for road race/autocross setup. One thing I can tell you,, is the weight transfer is different. I had full m&m and custom chopped springs. Slammed low. Very rigid, almost NO chassis movement. However, when trying to launch from a dig, this setup would only spin tires.!!! Through the corners is a different story though!!

Daily driven might I add, it sucked though climbing in and out with no swing out bars and also the 5pt harness was a bitch getting into because of my Corbeau non adjustable bucket seats. Lol

[ June 09, 2012, 05:14 PM: Message edited by: TACH2MX ]
 
Posted by 92 ssp (Member # 8013) on :
 
I got a 8 point cage in my street/track coupe never had any problems

 -
 
Posted by SS396chevelleakafasthatchakadmi (Member # 7277) on :
 
quote:
Originally posted by 92 ssp:
I got a 8 point cage in my street/track coupe never had any problems

 -

your missing 2 points to make it a cage there bucks
 
Posted by blown doors off (Member # 10713) on :
 
Looks like a 6 point roll bar to me.
 
Posted by 92 ssp (Member # 8013) on :
 
Its really a 8 point roll bar i got from jegs Competition Engineering 3000 that i had mier racing put in buddy...
 
Posted by iron50 (Member # 11231) on :
 
quote:
Originally posted by 1ST0KGT:
I too as well plan on caging as well, just a 4point though. I hit up iron50 and just waiting for a response.

sorry buddy I've been very busy right now! I decided to take a few days to rest!Call me next Wednesday thanks bro! [patriot]
 
Posted by SS396chevelleakafasthatchakadmi (Member # 7277) on :
 
quote:
Originally posted by 92 ssp:
Its really a 8 point roll bar i got from jegs Competition Engineering 3000 that i had mier racing put in buddy...

your still missing 2 points of the cage.
 
Posted by iron50 (Member # 11231) on :
 
quote:
Originally posted by LETHL 03:
So someone said that if you have a cage in your car, it's not a street car no more [Roll Eyes] [Confused]

So how many people have cages? I'm thinking of going to F.O.D to get a 6 or 8 point cage [patriot]

before the roll cage you need torque boxes! [Big Grin]
 
Posted by 92 ssp (Member # 8013) on :
 
Its crossed behide my back seat on the lower half
 
Posted by iron50 (Member # 11231) on :
 
quote:
Originally posted by 92 ssp:
Its really a 8 point roll bar i got from jegs Competition Engineering 3000 that i had mier racing put in buddy...

[Confused] and how much did you pay?
 
Posted by 92 ssp (Member # 8013) on :
 
Pay for the cage or how much to put it in??
 
Posted by iron50 (Member # 11231) on :
 
for put it in
 
Posted by 92 ssp (Member # 8013) on :
 
Lol...i had that in my car sence 1999 i cant realy tell you
 
Posted by iron50 (Member # 11231) on :
 
quote:
Originally posted by 92 ssp:
Lol...i had that in my car sence 1999 i cant realy tell you

lol !!I understand thanks bro!
 
Posted by 1ST0KGT (Member # 10606) on :
 
quote:
Originally posted by iron50:
quote:
Originally posted by 1ST0KGT:
I too as well plan on caging as well, just a 4point though. I hit up iron50 and just waiting for a response.

sorry buddy I've been very busy right now! I decided to take a few days to rest!Call me next Wednesday thanks bro! [patriot]
Sure thing bro
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com