This is topic Who can ID heads? *solved thanks* in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=053560
Posted by SIC70STANG (Member # 4347) on
:
I have some trickflow heads which I believe are high ports. The intake valves are 2.08 and that's about all I remember about them. How can I check springs or know what retainers I have. Also I don't know the cc of the head.
[ April 02, 2012, 09:20 PM: Message edited by: SIC70STANG ]
Posted by SS396 chevelle aka fasthatch (Member # 7277) on
:
almost look like r heads how long ago did get them
Posted by SIC70STANG (Member # 4347) on
:
Maybe 5 years ago
Posted by SIC70STANG (Member # 4347) on
:
The rocker studs are 7/16
Posted by SS396 chevelle aka fasthatch (Member # 7277) on
:
quote:
Originally posted by SIC70STANG:
Maybe 5 years ago
r heads then 5 years ago the only high ports were used ones as trickflow disconteid high ports for a while
Posted by SIC70STANG (Member # 4347) on
:
Ok that's what I thought I remembered. I'm trying to put together a rotating assy based on the heads.
Posted by RONIN (Member # 9987) on
:
quote:
Originally posted by SS396 chevelle aka fasthatch:
almost look like r heads how long ago did get them
It's been a while, where you been ?
Posted by MachYou (Member # 7934) on
:
Ballin
Posted by Greasy (Member # 5258) on
:
Call up TFS, give them the part number on the heads and they'll tell you about them.
Posted by Duncan Motors (Member # 7045) on
:
tfs is super helpfull
Posted by SIC70STANG (Member # 4347) on
:
i called TFS and they are twisted wedge race 206 heads. R series high ports with cnc chambers
Fueled by Ford Mustang Owners
on CaliforniaFords.com