This is topic Price on getting heads ported in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=052640
Posted by hilltim54 (Member # 10655) on
:
Whats the general price range on getting some gt40ps fully ported?? And getting an intake port matched?? I kno, "save ur money for some better heads" blah blah lol
Posted by 50Reasons (Member # 6452) on
:
Not worth it IMHO unless you port them your self the money you spend in porting you can buy heads that flow the same after the port job of those gt40s just saying the obvious
Posted by JBeezy53 (Member # 3960) on
:
You'll get more satisfaction doing it yourself. You may need some stones too.
http://www.summitracing.com/parts/SUM-G1060/
http://www.summitracing.com/parts/SUM-900640/
Here's a write-up for the exhaust port and basically you can just port match the intake side and lightly touch-up the bowl.
http://www.diyporting.com/gtpex.html
Posted by HYFLOHDS (Member # 4198) on
:
Check ur pm's
Posted by 93venom (Member # 778) on
:
Got an ed curtis cobra upper and lower if you are interested.
Posted by cali95gt (Member # 8940) on
:
Your looking at about $500 for a complete port job, valve job, valve spring upgrade... Add that to the cost of whatever you picked those things up for and you are prob sitting around $700-800....
Why not get aluminum cheap fuck???? Lol
Posted by Notch1320 (Member # 2647) on
:
Heard good things about HYFLOHDS.
Posted by norcalfiddy (Member # 11207) on
:
quote:
Originally posted by cali95gt:
Your looking at about $500 for a complete port job, valve job, valve spring upgrade... Add that to the cost of whatever you picked those things up for and you are prob sitting around $700-800....
Why not get aluminum cheap fuck???? Lol
+1 lol
lucky for me i was able to pickup a already ported set of P's for $200.
Posted by wilit (Member # 3367) on
:
PM Hyflohds. The guy is super nice and has a great setup for porting heads.
Posted by hilltim54 (Member # 10655) on
:
quote:
Originally posted by cali95gt:
Your looking at about $500 for a complete port job, valve job, valve spring upgrade... Add that to the cost of whatever you picked those things up for and you are prob sitting around $700-800....
Why not get aluminum cheap fuck???? Lol
Haha.. Fuccckkkkkkk uuuuuu!!! But I was just askin a question
Fueled by Ford Mustang Owners
on CaliforniaFords.com