This is topic modular swap in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=050907

---

Posted by LETHL 03 (Member # 5401) on :
 
Anyone has experience swapping a modular motor into a fox?
 

---

Posted by Catfish (Member # 9529) on :
 
Jam it in the echo.
 

---

Posted by 18x10roushes (Member # 5269) on :
 
Modulardepot.com
 

---

Posted by Cobra 93-4992 (Member # 4992) on :
 
Echo motor in the fox!
 

---

Posted by LETHL 03 (Member # 5401) on :
 
LS1 in the echo!!!!
 

---

Posted by asskickn88 (Member # 4957) on :
 
Just shove the Echo in the engine bay of the Fox, problem solved.
 

---

Posted by ZincYellowGt281 (Member # 9865) on :
 

quote:

---

Originally posted by Catfish:
Jam it in the echo.

---

quote:

---

Originally posted by asskickn88:
Just shove the Echo in the engine bay of the Fox, problem solved.

---

quote:

---

Originally posted by jmcclesk:

quote:

---

Originally posted by asskickn88:
Just shove the Echo in the engine bay of the Fox, problem solved.

---

now that was funny!!

---

Lmao..........
 

---

Posted by Greasy (Member # 5258) on :
 
Never done one myself but I have countless hours researching it. Lemme know if you want some links that I've saved.
 

---

Posted by Broke4.6 (Member # 9085) on :
 
i put a 32v in a gt...that was easy....if you use a full harness from a modular i couldnt imagine it being to difficult
 

---

Posted by ISP89LX (Member # 8949) on :
 
AED can do it!!!
 

---

Posted by VADEl2 (Member # 10332) on :
 
I'm doing mine now. Just need the wiring to figure out. http://www.californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=044837







Mods are fully built Teksid 4V with 03 heads.
Manley rods,pistons all ARP hardware.
Compression ratio is 8.6.1 built for boost. plan is to go single turbo system that will have a Precision T76 BB turbo that will be built by All out performance in Fresno.
Magnaflow catback
Bassani X-pipe
Glenn's performance 1000hp return style fuel system
MM Full maximum grip suspension package with tubular k-member for turbo kit.
31 spline moser axles
3.55 rear gears
UPR Girdle
03 cobra traction lock
Cobra Brakes front and rears.
Baer cross drilled and slotted rotors.
Corbeau A4 seats.
18x9 Saleen chrome Replicas

I'm sure I'm forgetting mods. The conversion has been time consuming. I've looked on Modularfords for most of my info. As well as SVTPerformance and the corral. There is a lot of info out there. I'm using a complete 03 mach 1 harness and ECU. Once I figure out the wiring I will start the car.

[ November 25, 2011, 07:16 PM: Message edited by: VADEl2 ]
 

---

Posted by VADEl2 (Member # 10332) on :
 








 

---

Posted by LETHL 03 (Member # 5401) on :
 
Looking good
 

---