This is topic 363ci Notchback Mustang Build.. in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=049250

---

Posted by SIC9250 (Member # 8216) on :
 
My uncle (Cartfan) has been pretty busy spoiling himself with a new silver 03 cobra and a paintjob and resto of his SSP notch (Dart block 363ci,vic jr heads,t56,tubular k,coilovers,etc...) we have built this car from ground up from a stock white POS (literally)lol to a all around badass coupe!! lots of long nights and money into this slut



and the cobra...



[ January 08, 2012, 02:41 PM: Message edited by: SIC9250 ]
 

---

Posted by v-town coupe (Member # 2771) on :
 
sick!
 

---

Posted by SIC9250 (Member # 8216) on :
 
Computer FAIL!! My bad will be fixed soon..
 

---

Posted by LS1 BRUH (Member # 4216) on :
 
yeeeee
 

---

Posted by SacNotch50 (Member # 7439) on :
 
both are
 

---

Posted by Slowback67 (Member # 6348) on :
 
That notchback looks real nice.
 

---

Posted by miguelss1 (Member # 10812) on :
 
That color looks sick!!
 

---

Posted by 87droptop50 (Member # 7185) on :
 
Sweet!!!
 

---

Posted by 85notch fo-eye (Member # 10637) on :
 
thats a bad ass bitch u guys got down
 

---

Posted by turbo50 (Member # 6700) on :
 
Great job Brandon! You build the motor or paint it or do the body work or all of it? Either way it looks great man!

I like the color!

Dan
 

---

Posted by turbo50 (Member # 6700) on :
 
Great job Brandon! You build the motor or paint it or do the body work or all of it? Either way it looks great man!

I like the color!

Dan
 

---

Posted by STK85 (Member # 9265) on :
 
Clean bro.
 

---

Posted by SAV650HAB (Member # 10324) on :
 
nice job......car looks great
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by turbo50:
Great job Brandon! You build the motor or paint it or do the body work or all of it? Either way it looks great man!

I like the color!

Dan

---

Thanks Dan,ive basically have done 80% of the work on the notch but both my uncle and i have poured everything into this build and it all started in utah and eventually moved here to cali where 110% attention could be done to the car..I didnt assemble the shortblock,interior or paint it lol but anything and everything else was handled by me or my uncle,he and i have both learned alot during this build and now have one hell-of a car ...We have been very anal on this build and have had alot of different combo's already its such a solid car and after a lil bit of boost it should be a serious contender

[ August 29, 2011, 03:30 AM: Message edited by: SIC9250 ]
 

---

Posted by 89chpcoupe (Member # 6046) on :
 
Was the name of the paint? If you dnt mind asking you?
 

---

Posted by SIC9250 (Member # 8216) on :
 


[ January 08, 2012, 02:42 PM: Message edited by: SIC9250 ]
 

---

Posted by 89chpcoupe (Member # 6046) on :
 
Was the name of the paint? If you dnt mind asking you?
 

---

Posted by 89chpcoupe (Member # 6046) on :
 
Was the name of the paint? If you dnt mind asking you?
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by 89chpcoupe:
Was the name of the paint? If you dnt mind asking you?

---

its the new ford festiva paint...its a 3 stage setup..
 

---

Posted by Chavez66 (Member # 9812) on :
 
Super clean notch bro I love the color
 

---

Posted by Chavez66 (Member # 9812) on :
 
Super clean notch bro I love the color
 

---

Posted by 89chpcoupe (Member # 6046) on :
 
Thanx bro. Looks hella clean
 

---

Posted by 89chpcoupe (Member # 6046) on :
 
Thanx bro. Looks hella clean
 

---

Posted by 79stanggt (Member # 11197) on :
 
Damn that red coup is shittn mad props guys
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
Where did you find that lip at I've been looking for one?
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
Where did you find that lip at I've been looking for one but can't find one?
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by Big block 66 f100:
Where did you find that lip at I've been looking for one but can't find one?

---

What's up J how ya been bro long time no see...that chin spoiler is off a 03/04 mach 1..u can order it from american muscle for like $60 bucks I think...anyways they fit clean
 

---

Posted by Chavez66 (Member # 9812) on :
 
Super clean notch bro I love the paint
 

---

Posted by Chavez66 (Member # 9812) on :
 
Super clean notch bro I love the paint
 

---

Posted by 940sick3 (Member # 2713) on :
 
that notch is super clean

i love threads like these. keep me motivated

keep us updated
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by 940sick3:
that notch is super clean

i love threads like these. keep me motivated

keep us updated

---

willdo bro...i was gonna post pics forever ago but i figured id wait till thepaint was done and give a good look at the proggression this car has had since its days as a hurt notchback...lol it started as a h/c/i 302 build and thats all ya that didnt work out lol
 

---

Posted by 4.6 EATIN GM'S (Member # 1633) on :
 
nice work, car looks good
 

---

Posted by Layzie650 (Member # 10274) on :
 
nice pics
 

---

Posted by SantaClara_Lx (Member # 9488) on :
 
very nice can you please tell me what suspension you're running on the cobra and are those stock cobras all the way around
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by SantaClara_Lx:
very nice can you please tell me what suspension you're running on the cobra and are those stock cobras all the way around

---

The cobras got 1 coil cut on all 4 corners and no ISO's..factory bilsteins and rides perfect in my o2..yes stock wheels with 1" rear spacer..
 

---

Posted by Nasty Notch (Member # 8863) on :
 
Were and how much did u spend on paint if u dint mind me askin I'm lookin to get my car painted??
 

---

Posted by 915.0gt (Member # 9518) on :
 
lookin good, the engine in that coupe looks like it means business
 

---

Posted by SIC9250 (Member # 8216) on :
 
thanks for all the props guys!! comments like this is what its all about in the end
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by 915.0gt:
lookin good, the engine in that coupe looks like it means business

---

just a little bit
 

---

Posted by Camara90 (Member # 134) on :
 
Fox looks good, I really like the color!
 

---

Posted by cartfan (Member # 9021) on :
 
Just want say thank u to everyone for the mad love! The notch was painted candy red metallic. Its a 2011-12 factory ford color. The paint was done from Fast Eddies in North Highlands... There has been a few helping on this build but need to give a big shout out to sic9250, my nephew, he has put so many hours into this car. We had many late nights working on this car and changing set-ups. U will be seeing us at the track and shows in the near future! As for the cobra, see u all atthe grown man cruse this weekend
 

---

Posted by SIC9250 (Member # 8216) on :
 
Here's some update pics,been waiting on parts (story of this cars life lol) anyway,set the freshly built dart 363 setup in the bay,got the radiator in and the booster delete last night,trans is this week and interior just needs dash and door panels bolted up and that's squared away,cage is already welded in just need swingouts enjoy!



[ January 08, 2012, 03:19 PM: Message edited by: SIC9250 ]
 

---

Posted by norcalfiddy (Member # 11207) on :
 
God damn that notch is fuckin clean!!

post more pics when you get a chance!
 

---

Posted by RONIN (Member # 9987) on :
 
Nice. I hardly ever hear of people doing 363 builds in a street car . It should be nasty on the streets and the track!
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by RONIN:
Nice. I hardly ever hear of people doing 363 builds in a street car . It should be nasty on the streets and the track!

---

Also gonna be running on liquid corn and getting a nice forced induction vortech soon
 

---

Posted by SIC9250 (Member # 8216) on :
 
And a couple for the cobra



[ January 08, 2012, 03:09 PM: Message edited by: SIC9250 ]
 

---

Posted by SIC9250 (Member # 8216) on :
 
Turning this into a Build thread instead of an update thread lil tons if pics and info are to come,any ?? Lmk..

To the THIEFS: this car is locked up solid ina shop with dogs and in the middle of nowhere,if u think u can gets past all that and still feel the urge to end your life go ahead,I'm sure a few Russian assault rifles and 9mm's will make quick work on ya,keep to your own low life's go EARN IT yourself!

Brandon-

[ January 08, 2012, 03:01 PM: Message edited by: SIC9250 ]
 

---

Posted by hilltim54 (Member # 10655) on :
 
That coupe is super duper gorgeous!! I mean damn!!
 

---

Posted by Boss 327 (Member # 9143) on :
 
That coupe is super clean
 

---

Posted by CornOil_&_Boost (Member # 5888) on :
 

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by RONIN:
Nice. I hardly ever hear of people doing 363 builds in a street car . It should be nasty on the streets and the track!

---

Also gonna be running on liquid corn and getting a nice forced induction vortech soon

---

quote:

---

Originally posted by CornOil_&_Boost:

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by RONIN:
Nice. I hardly ever hear of people doing 363 builds in a street car . It should be nasty on the streets and the track!

---

Also gonna be running on liquid corn and getting a nice forced induction vortech soon

---

going to have to ditch the A1000 when he goes E85

---

Ill admit ima newb when it comes to e85 still a new subject to me haven't dove into threads and info yet so can u enlighten me Jason?? I thought ona return still system a A1000 filter needed to be changed and the pump was a good setup thanks Jason for the info..
 

---

Posted by SIC9250 (Member # 8216) on :
 
http://www.theturboforums.com/smf/carburetor-boost-tech-questions/aeromotive-a1000/

Halfway down the page,Brett from Aeromotive says u can use an A1000 from 02 and newer..
 

---

Posted by CornOil_&_Boost (Member # 5888) on :
 

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by CornOil_&_Boost:

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by RONIN:
Nice. I hardly ever hear of people doing 363 builds in a street car . It should be nasty on the streets and the track!

---

Also gonna be running on liquid corn and getting a nice forced induction vortech soon

---

going to have to ditch the A1000 when he goes E85

---

Ill admit ima newb when it comes to e85 still a new subject to me haven't dove into threads and info yet so can u enlighten me Jason?? I thought ona return still system a A1000 filter needed to be changed and the pump was a good setup thanks Jason for the info..

---

quote:

---

Originally posted by SIC9250:
http://www.theturboforums.com/smf/carburetor-boost-tech-questions/aeromotive-a1000/

Halfway down the page,Brett from Aeromotive says u can use an A1000 from 02 and newer..

---

right but look what he says...

"Regardless of the fuel pump, the nature of alcohol fuel then, will reduce the maximum HP supported, by the amount of increased fuel required to achieve stoichiometry and equal gasoline' heat energy. This is obviously a give and take scenario. A current A1000 is more than up to the task of handling ethanol as a fuel, but as it is with any fuel pump, it's maximum HP supported on Ethanol is less than gasoline, in the case of E-85 figure approximately 30% less."

it's the HP support rating.....

a 363 with a big enough blower on E85 is going to be more than an A1000 can handle
 

---

Posted by SIC9250 (Member # 8216) on :
 
the knowledge u just laid out was primo bro hahaha good shit man..the blowers gonna be a future addition until then the Aeromotive setup he's got is primo,50lb injectors,aero rails,aero fpr,a1000,sumped tank,full an lines,the car N/A is gonna run hard to 7k and def be in the low 11s I put my name on it
 

---

Posted by *BlownMach1* (Member # 5400) on :
 
Not with u driving Brandon!!! More like 13.5s...lol jk, u can buy high impedance injectors up to 105lb but fox computer will be a PiTA to tune and good luck getting a tuner to do it. U have the option of running a injector driver and low impedance injectors but other than that u will need a stand alone.. BS3, XFI, or megasquirt! As u know, gotta pay to play so all that will add up quick, and Please don't put a Si trim on that car, even though they are good enough, they are not as efficient as a YSI or what I perfer a F1C procharger. Either way it will be a beast if ur uncle spends the coin!!

[ January 08, 2012, 08:09 PM: Message edited by: *BlownMach1* ]
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by *BlownMach1*:
Not with u driving Brandon!!! More like 13.5s...lol jk, u can buy high impedance injectors up to 105lb but fox computer will be a PiTA to tune and good luck getting a tuner to do it. U have the option of running a injector driver and low impedance injectors but other than that u will need a stand alone.. BS3, XFI, or megasquirt! As u know, gotta pay to play so all that will add up quick, and Please don't put a Si trim on that car, even though they are good enough, they are not as efficient as a YSI or what I perfer a F1C procharger. Either way it will be a beast if ur uncle spends the coin!!

---

Lol he's DEF got the coin if you can't tell already and who said anything about an s-trim I mentioned vortech and that would def be a y-trim or a procharger f1..We were talkin fuel system setup for n/a and Jason thought I was reffering to the car being boosted when it hits the streets and we got on the same page,the stock computer will only be ran n/a (Shaun from AED will be tuning this and conversations with him have already solidified that) and ofcourse the car will getta FAST or BG3 when the blower comes lol we don't build half ass shit

FYI Casey,my driving would make you look like u got 2 left feet bud I could cut a 1.6 60' in water on your ass and ill be sure to shoot u a pm when the car hits the track N/A

[ January 08, 2012, 10:04 PM: Message edited by: SIC9250 ]
 

---

Posted by ISP89LX (Member # 8949) on :
 

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by *BlownMach1*:
Not with u driving Brandon!!! More like 13.5s...lol jk, u can buy high impedance injectors up to 105lb but fox computer will be a PiTA to tune and good luck getting a tuner to do it. U have the option of running a injector driver and low impedance injectors but other than that u will need a stand alone.. BS3, XFI, or megasquirt! As u know, gotta pay to play so all that will add up quick, and Please don't put a Si trim on that car, even though they are good enough, they are not as efficient as a YSI or what I perfer a F1C procharger. Either way it will be a beast if ur uncle spends the coin!!

---

Lol he's DEF got the coin if you can't tell already and who said anything about an s-trim I mentioned vortech and that would def be a y-trim or a procharger f1..We were talkin fuel system setup for n/a and Jason thought I was reffering to the car being boosted when it hits the streets and we got on the same page,the stock computer will only be ran n/a (Shaun from AED will be tuning this and conversations with him have already solidified that) and ofcourse the car will getta FAST or BG3 when the blower comes lol we don't build half ass shit

FYI Casey,my driving would make you look like u got 2 left feet bud I could cut a 1.6 60' in water on your ass and ill be sure to shoot u a pm when the car hits the track N/A

---

 

---

Posted by SIC9250 (Member # 8216) on :
 
Post 3k can't wait to break this car in the right way...

KNOTTS 2012
 

---

Posted by triple b (Member # 8763) on :
 
Major major sic azz fuc I love the shaved door moulding just like my 5.0 I gotta come by the shop to see that in person.
 

---

Posted by Pure Stang (Member # 7251) on :
 
Sounds like she is almost done! It's going to be a beast and looks bad ass too
 

---

Posted by 8lbCoupe (Member # 11416) on :
 
who did your engine bay????
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by 8lbCoupe:
who did your engine bay????

---

Engine bay was done in the garage,everything but the paint and assembly of the shortblock was done by us

[ January 11, 2012, 11:13 PM: Message edited by: SIC9250 ]
 

---

Posted by Brandonn (Member # 632) on :
 

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by 8lbCoupe:
who did your engine bay????

---

Engine bay was done in the garage,everything but the paint and assembly of the shortblock was done by us

---

quote:

---

Originally posted by Brandonn:

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by 8lbCoupe:
who did your engine bay????

---

Engine bay was done in the garage,everything but the paint and assembly of the shortblock was done by us

---

You did a good job

---

Lol I posted "US" cause I'm concentrating on the car,not the MANY people who have had hours into this car,including you brotha(shaved the engine bay),and I didn't think really going into details in a reply to a newb (8lbcoupe) was crucial,my bad bud

[ January 13, 2012, 03:11 PM: Message edited by: SIC9250 ]
 

---

Posted by REDLIGHTING (Member # 11296) on :
 
I love it good work.
 

---

Posted by SIC9250 (Member # 8216) on :
 
Lol random to see this thread,I wasn't gonna update for a bit but we do have a full FAST XFI kit and got rid of the holley systemax for a vic jr/wilson 90mm elbow injection setup,fully ported and both items are polished up,pics to come
 

---

Posted by SIC9250 (Member # 8216) on :
 
Kooks bigboy headers,new intake,an wiring up the FAST XFi


 

---

Posted by 50Reasons (Member # 6452) on :
 
looks sweet!
 

---

Posted by 66_5.0 (Member # 9974) on :
 
Now this is what I call a build!

Cant wait to see the finished product
 

---

Posted by REDLIGHTING (Member # 11296) on :
 
Who did the engine bay
 

---

Posted by Cartfan (Member # 9021) on :
 
Brandon Cioli and my brother Darryl took care of all the wielding and panels before it was taken to the paint shop.. Much love to them, the engine bay came out better than I could have hoped for!
 

---

Posted by ISP89LX (Member # 8949) on :
 
This notch is going to be a monster. Good job to you guys and the shop. Mad props and just goes to show the type of work you guys do is flawless.
 

---

Posted by Cartfan (Member # 9021) on :
 
No work has been done at The Shop... this has been built at my brothers house by myself, Brandon (Sic9250) with some assistance from Brandon (Brandonn) and his wielding skillz!
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by ISP89LX:
This notch is going to be a monster. Good job to you guys and the shop. Mad props and just goes to show the type of work you guys do is flawless.

---

No doubt the cats at "The Shop" do great work but this project has been a little garage whore for me an my uncle,not taking anything away from my buds in any way,shit I live half my life there wrenching and doing what I can to help them succeed into bigger an better ways but this project is a personal build,nothing but family an friends built this car,no shops,no big names,just your average grease monkeys

 

---

Posted by DIRTY SALLY (Member # 7845) on :
 

 

---

Posted by JUNKYARD5.0 (Member # 10398) on :
 

quote:

---

Originally posted by DIRTY SALLY:

---

 

---

Posted by ISP89LX (Member # 8949) on :
 

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by ISP89LX:
This notch is going to be a monster. Good job to you guys and the shop. Mad props and just goes to show the type of work you guys do is flawless.

---

No doubt the cats at "The Shop" do great work but this project has been a little garage whore for me an my uncle,not taking anything away from my buds in any way,shit I live half my life there wrenching and doing what I can to help them succeed into bigger an better ways but this project is a personal build,nothing but family an friends built this car,no shops,no big names,just your average grease monkeys

---

Whoops my mistake haha. Damn that even makes love the notch even more. I love garage builds some of the baddest cars get built in garages. I think more pride and love goes into the car when it's under your own roof not that it wouldn't in the shop but it's like watching your own kid grow up . I hope one day my notch will be at your guys level. Everytime I stare at the pics it puts a fat smile on my face and makes me love my fox even more. I'm deff going to hit you guys up for some advice as soon as I get some more pennies saved up. Great work guys and my mistake for the misunderstanding. Garage builds FTW. This car is going to be a attention whore at knotts this year. Make it happen fellas and show them how nor-cal likes to play too.

 

---

Posted by DIRTY SALLY (Member # 7845) on :
 

quote:

---

Originally posted by JUNKYARD5.0:

quote:

---

Originally posted by DIRTY SALLY:

---

---

 

---

Posted by JUNKYARD5.0 (Member # 10398) on :
 

quote:

---

Originally posted by DIRTY SALLY:

quote:

---

Originally posted by JUNKYARD5.0:

quote:

---

Originally posted by DIRTY SALLY:

---

---

Error code-5534

---

 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by ISP89LX:

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by ISP89LX:
This notch is going to be a monster. Good job to you guys and the shop. Mad props and just goes to show the type of work you guys do is flawless.

---

No doubt the cats at "The Shop" do great work but this project has been a little garage whore for me an my uncle,not taking anything away from my buds in any way,shit I live half my life there wrenching and doing what I can to help them succeed into bigger an better ways but this project is a personal build,nothing but family an friends built this car,no shops,no big names,just your average grease monkeys

---

Whoops my mistake haha. Damn that even makes love the notch even more. I love garage builds some of the baddest cars get built in garages. I think more pride and love goes into the car when it's under your own roof not that it wouldn't in the shop but it's like watching your own kid grow up . I hope one day my notch will be at your guys level. Everytime I stare at the pics it puts a fat smile on my face and makes me love my fox even more. I'm deff going to hit you guys up for some advice as soon as I get some more pennies saved up. Great work guys and my mistake for the misunderstanding. Garage builds FTW. This car is going to be a attention whore at knotts this year. Make it happen fellas and show them how nor-cal likes to play too.

---

Thanks for the love bro keep at it with your car an you'll get there one day! Foxbodys FTW
 

---

Posted by nasty93 (Member # 8935) on :
 
coupe looks bad ass!
 

---

Posted by RODRIGUEZ (Member # 9104) on :
 
Is this the same Cobra that you are parting out?

Very nice color choice on the notch, have any pics of it completed? Thanks and congrats on you're guys' build.
 

---

Posted by 2T0NE (Member # 4216) on :
 
fucken solid ass cars
 

---

Posted by SIC9250 (Member # 8216) on :
 
Updates

Got the car all wired up,fuel plumbed (e85 filled tank lol),fast xfi all wired as-well,still working out the bugs on the initial tune,should be running very soon also decided to just go for broke and my uncle picked up a D1sc,its pullied for 14pnds but will be 20/25pnds before debut/race day all tuned up,also picked up the Team-Z full mini-tub/stg1 kit,got some work to do still,will post first start-up vid as-well,enjoy fellas...

Just mocked up,nothing official,still need intercooler/piping/Bov valve installed/change inj/ etc...haters keep it movin..


 

---

Posted by REDLIGHTING (Member # 11296) on :
 
Looks good what kind of radiator hold down is that
 

---

Posted by phildog (Member # 1214) on :
 
I'm gonna need to see your C.A.R.B. numbers for these engine parts, sir.


Great looking progress. Well done.
 

---

Posted by SantaClara_Cobra (Member # 9488) on :
 
sick cars man and how do u like those spacers on the cobra
 

---

Posted by 86- 50 (Member # 4723) on :
 
Can't wait to see this car get down in person, pretty and fast, the best of both worlds
 

---

Posted by SIC9250 (Member # 8216) on :
 
Thanks fellas

*radiator hold-down is upr I believe
 

---

Posted by V3T HNTR (Member # 11618) on :
 
Love the color on the coupe! Good job!
 

---

Posted by blkfoxbody89 (Member # 8361) on :
 
Such a beautifully tucked and pristine engine bay. Def up there with the best of them. i'm going dart 363 w/ a 70mm crapster power turbo. mine will be much much more on the baller on a budget side.right now im saving for the guts to stuff my iron eagle block and a proper t56 to mate to it.


To you my good sir!
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by blkfoxbody89:
Such a beautifully tucked and pristine engine bay. Def up there with the best of them. i'm going dart 363 w/ a 70mm crapster power turbo. mine will be much much more on the baller on a budget side.right now im saving for the guts to stuff my iron eagle block and a proper t56 to mate to it.


To you my good sir!

---

Sounds like ul have a healthy little setup too bro! Thanks man this project couldn't have been done without the people who have put there hard work into this bitch an the many good members from Cafords and other forums/members across the country for parts,biggest props to my Uncle (cartfan) tho,without his hard work an deep pockets we wouldn't have this family built notch.......2 failed 347ci frpp shortblocks a Procharged H/C/I 363 Dart setup,shaved engine bay/full body an paint work,tubular/coilover suspension/and a 6spd swap an built rearend later lol

[ June 22, 2012, 08:39 PM: Message edited by: SIC9250 ]
 

---

Posted by CARTFAN (Member # 9021) on :
 
She'll be running soon!!

[ June 23, 2012, 02:58 AM: Message edited by: CARTFAN ]
 

---

Posted by CARTFAN (Member # 9021) on :
 

quote:

---

Originally posted by SIC9250:
[QUOTE]Sounds like ul have a healthy little setup too bro! Thanks man this project couldn't have been done without the people who have put there hard work into this bitch an the many good members from Cafords and other forums/members across the country for parts,biggest props to my Uncle (cartfan) tho,without his hard work an deep pockets we wouldn't have this family built notch.......2 failed 347ci frpp shortblocks a Procharged H/C/I 363 Dart setup,shaved engine bay/full body an paint work,tubular/coilover suspension/and a 6spd swap an built rearend later lol

---

quote:

---

Originally posted by CARTFAN:

quote:

---

Originally posted by SIC9250:
[QUOTE]Sounds like ul have a healthy little setup too bro! Thanks man this project couldn't have been done without the people who have put there hard work into this bitch an the many good members from Cafords and other forums/members across the country for parts,biggest props to my Uncle (cartfan) tho,without his hard work an deep pockets we wouldn't have this family built notch.......2 failed 347ci frpp shortblocks a Procharged H/C/I 363 Dart setup,shaved engine bay/full body an paint work,tubular/coilover suspension/and a 6spd swap an built rearend later lol

---

Think I need to be the one giving the shout out.. This car wouldn't be what it is today without Sic9250, my nephew. So many hours have been poured into this project, alot of his work can be seen throught the car. Means alot to have such help from guys like my brother Darryl, Brandon, and Brandon from sac raceway. Lots more work to go... But we be out at track soon enough!!

---

I'm very proud to say i worked on that car, i can not WAIT to hear that bitch fire and whistle

p.s. you dont need a intercooler with e85
 

---