This is topic My E85 conv. Build!!! *warning* high HP parts content inside! in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=049106
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
Ok so the switch to E85 may have costed me a bit cause I decided to upgrade a lot of parts while I was at it. I was shooting for a HP goal of 800rwhp but the more I speak to venders/tuners about my goal they say if I wanna run 25psi or more boost I can see 1000rwhp!! I just want the thing to be reliable so I may just get that 1000hp dyno slip and de tune it for street use! I also have a NOS kit I can install if I feel it will be needed for my dyno goal! One step at a time! So without further adue, here are the parts most of cafords has never seen!!! I have ordered more parts and everyday they keep rolling in so I will update as they come!
Basic list of mods!
Built balanced blueprinted iron shortblock with all forged Manley internals bored over .20.. All upgraded ARP bolts including mains,wave lock 2000 rods, head studs..etc
Fully ported 03 heads with stage 3 comp cams.. Will be degree'd of course! And comp beehive springs an retainers. Bought all new valves from ford. Got a deal and couldn't afford stainless valves!!!
Ported lower intake with 2.8h KB blower with behemoth intake, dual 75mm tb, 115mm maf with HPX senser and zone 5 maf extender, huge 5" inlet S&B powerstack filter!
Fuel system will be fore rails, 105lb Bosch injectors, sumped tank with -10an feed lines, -8am return, fuelab or magnafuel pump(not sure yet), magnafuel 2000hp fuel regulator!
Ported heads!
This used to fit over my OLD tb!!!
Just size reference!
Yes those are billet tips!!!
Upclose pic!
My mass air and filter! 115mm or 5"!!!!
How my dining room table looks right now!! Wife wants to kill me!!!
An the beauty it's all going in!! Incase you never seen it!!
Posted by poisonpony96 (Member # 3942) on
:
Sick!! E85 ftw
Posted by blown doors off (Member # 10713) on
:
105's that's it?(sarcastic question btw) Nice Fobra though. What's the significant of billet injectors?
[ August 19, 2011, 07:16 PM: Message edited by: blown doors off ]
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
Fobra.......lol.....big block V6 Fobra... FTW!!!!!!!!!!
[ August 19, 2011, 07:32 PM: Message edited by: M&M Performance *BlownMach1* ]
Posted by Pure Stang (Member # 7251) on
:
Sick! Never thought a 2.8 would be able to push that much hp
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
I thought the same thing till I talked with a guy that did it! Thought all cobra's that had anything over 800hp was turbo only.. Kenne bell says the blower is more then capable of it, it the restrictions before the blower, Ie... Blower inlet, TB, maf housing, intake and filter (believe it or not at this hp level)
My old setup I never dyno'd but similar car were butting down 700 like Terrence is doing on the 2.9 with small pulley on 91 pump gas!!!
Posted by NavidR (Member # 3164) on
:
Thats going to be sick!
Posted by Pure Stang (Member # 7251) on
:
Nice! I'm jealous lol. When do you expect it to be complete?
Posted by 89bluenotch (Member # 7454) on
:
nicely!!! keep us updated
Posted by 50 Deep (Member # 6216) on
:
Looks good bro. Good luck with the build and keep us updated!!
Posted by a302juGRnuat (Member # 10163) on
:
havent seen your cobra before...when am i gonna see it. looks clean
Posted by StreakMatt (Member # 6257) on
:
Nice build you have going Casey. It will be a runner for sure. You keeping the 6 speed in it? If so when you break her in and get tuned we should line them up at Sac Raceway
Posted by 65mustang408 (Member # 8681) on
:
Fuckin weak sauce eaton power there win haha
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
Ya matt I am staying 6 speed! To be honest I will take it to the track but I dint expect great times. I'm not going to launch it super hard until I upgrade my axles and input shaft on the tranny. Wanna enjoy the car without breaking it! But I'm sure we can work out a friendly side by side roll from a 40!!!
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
And talon I would not complain if my 13 second eaton powered car was yours!!! Don't worry though, mine will be sounding just like yours when we are sitting side by side!! Your car has it's own theme song too!!! Black and yellow, black and yellow!!!!!
[ August 20, 2011, 02:01 AM: Message edited by: M&M Performance *BlownMach1* ]
Posted by 65mustang408 (Member # 8681) on
:
Lol its all good just talking shit. I love stage 3's. Hope to take mine to the track soon as well. 2600lb 500+rwhp its a hand full on the street!! Hope your e85 works out I will do the switch soon too.
Posted by 5LTR SVT (Member # 7080) on
:
Son Bitch air filters nice!
Posted by 95gtdrop (Member # 7478) on
:
god damn i love that color!!!
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
quote:
Originally posted by 5LTR SVT:
Son Bitch air filters nice!
Correcting SON & BITCH...lol.. I got this air filter for $35... I can't complain.. The K&N I was looking at was gonna run me $60!!! Got this as a add on option to the maf housing!!!
Posted by 1RaW93SvT (Member # 9151) on
:
quote:
Originally posted by M&M Performance *BlownMach1*:
And talon I would not complain if my 13 second eaton powered car was yours!!! Don't worry though, mine will be sounding just like yours when we are sitting side by side!! Your car has it's own theme song too!!! Black and yellow, black and yellow!!!!!
i got much respect for ya bro but it will sound NOTHING like talons car! also no way in hell he has a 13 second ride! its a over 500 hp rear wheels car and he is tired of it already!! also your shit is bad ass but talon has the baddest 67 coupe in norcal hands down!!
cant wait to see your shit on the streets blurple and all get it running bro talon is your first race! he beats up on z06s like its breakfast!!!!
much respect for both builds there nasty!!!! but when its finished call him!!!!
[ August 21, 2011, 01:42 PM: Message edited by: 1RaW93SvT ]
Posted by 65mustang408 (Member # 8681) on
:
Ha alcohol and Cafords surfing ftw there bud. Car is sick casey how many psi you plan to run?
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
1raw93svt- you must have missed the part where me and talon were joking about the 13 sec. Times!!! Haha we all know talons car is bad ass bro. And my car was already at his Power level when it was black with my ported eaton! Z06's got left every time. His car is also really light, I'm sure that thing moves!!!
Talon- I'm planning on going for 23-25lbs!! Depends how much power it makes and how much boost I loose! I have the 19lb(3.5") upper pulley on now with a 4 lb lower but the inlet, longtubes and no cats should loose atleast 4lb boost! But I have a 3" and a 2.90 pulley on standby! Car should not be a joke when it's done and we can get a few fun runs in, no biggy and Terrence and me have a run coming too!! Streakmatt but I'm positive he will take me at the track, street may be better for me.
Also keep in mind guys that just because my car WILL make big power does not mean it will beat some of the cars with less HP! Matts car will make a little less power but also weighs was less, a does talons car so with that said, it's all in fun for everyone win or lose! Please don't come on here talking shit and saying so and so is faster and will beat whoever. I understand this is cafords but we all do it for the love of cars and not to make enemies!!!
Also on the list is a good friend of mine who has a built ls2 powered vette with a A&A vortech kit. It just put down 830rwhp.. And foxGT of course.. He always loves to run!! And I'm sure the list will go on!!
As stated above j still have stock axles and tranny so I can't launch it super hard yet!!
[ August 21, 2011, 01:59 PM: Message edited by: M&M Performance *BlownMach1* ]
Posted by 50Reasons (Member # 6452) on
:
Sounds like this car is going to be a beast
Casey ! Damn you ain't playing !
Posted by StreakMatt (Member # 6257) on
:
quote:
Originally posted by M&M Performance *BlownMach1*:
Car should not be a joke when it's done and we can get a few fun runs in, no biggy and Terrence and me have a run coming too!! Streakmatt but I'm positive he will take me at the track, street may be better for me.
Also keep in mind guys that just because my car WILL make big power does not mean it will beat some of the cars with less HP! Matts car will make a little less power but also weighs was less, a does talons car so with that said, it's all in fun for everyone win or lose! Please don't come on here talking shit and saying so and so is faster and will beat whoever. I understand this is cafords but we all do it for the love of cars and not to make enemies!!!
Also on the list is a good friend of mine who has a built ls2 powered vette with a A&A vortech kit. It just put down 830rwhp.. And foxGT of course.. He always loves to run!! And I'm sure the list will go on!!
As stated above j still have stock axles and tranny so I can't launch it super hard yet!!
Hey Bro you know its all fun on my end. Hence the
from my post. I was just busting your balls CA Fords style! You know anytime someone posts up a build thread these days, There is always someone jumping in and calling them out with nothing but Dreams of high HP! Good luck with the build.
Posted by CornOil_&_Boost (Member # 5888) on
:
quote:
Originally posted by StreakMatt:
quote:
Originally posted by M&M Performance *BlownMach1*:
Car should not be a joke when it's done and we can get a few fun runs in, no biggy and Terrence and me have a run coming too!! Streakmatt but I'm positive he will take me at the track, street may be better for me.
Also keep in mind guys that just because my car WILL make big power does not mean it will beat some of the cars with less HP! Matts car will make a little less power but also weighs was less, a does talons car so with that said, it's all in fun for everyone win or lose! Please don't come on here talking shit and saying so and so is faster and will beat whoever. I understand this is cafords but we all do it for the love of cars and not to make enemies!!!
Also on the list is a good friend of mine who has a built ls2 powered vette with a A&A vortech kit. It just put down 830rwhp.. And foxGT of course.. He always loves to run!! And I'm sure the list will go on!!
As stated above j still have stock axles and tranny so I can't launch it super hard yet!!
Hey Bro you know its all fun on my end. Hence the
from my post. I was just busting your balls CA Fords style! You know anytime someone posts up a build thread these days, There is always someone jumping in and calling them out with nothing but Dreams of high HP! Good luck with the build.
or even worse...friends of that person calling others out....
horsepower to weight ratio is a great thing to compare but when you're comparing a 500RW to a 700Rw car...a few hundred pounds is not going to make that big of a difference...
well maybe a difference on 2 bus lengths instead of 2.5 bus lengths..
[ August 21, 2011, 06:31 PM: Message edited by: CornOil_&_Boost ]
Posted by SIC9250 (Member # 8216) on
:
Gotta love them cheerleaders
Posted by M&M Performance *BlownMach1* (Member # 5400) on
:
All together now!!!! Give me a "t" yeah u got ur "t" u got your "t" , now give me a "A"....lol jk....gotta love cafords!!!! And like I said before, it's all in fun... But there will always be haters on cafords so let the haters hate! We love the attention!!!
Fueled by Ford Mustang Owners
on CaliforniaFords.com