This is topic Taking out double sided tape out of paint? in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=041810
Posted by Eddie510- (Member # 2354) on :
 
How do safely take it off without messing up paint?

[ May 01, 2010, 05:35 PM: Message edited by: Eddie510- ]
 
Posted by SPTVENM (Member # 7080) on :
 
Goo gone?
 
Posted by Eddie510- (Member # 2354) on :
 
dont know if i should try it.. I heard of the rubber eraser wheel you hook up to a compressor but thats 100$ lol
 
Posted by primed351 (Member # 8613) on :
 
The rubber eraser works the best, go to a body shop I'm sure theyle do it for cheap.
 
Posted by Eddie510- (Member # 2354) on :
 
quote:
Originally posted by primed351:
The rubber eraser works the best, go to a body shop I'm sure theyle do it for cheap.
yeah ive been youtubing it right now,lol this guy is using a rubber from a door stopper .lol check it out Rubber tool
 
Posted by primed351 (Member # 8613) on :
 
That's hella funny u just gotta be carefull not to burn the paint. How much are you trying to get off
 
Posted by AbominableSnoman... (Member # 8290) on :
 
I've used 3m adhesive remover in the past. Works wonders. I think its $7 for a can.
 
Posted by NCALSVT (Member # 3205) on :
 
quote:
Originally posted by Eddie510-:
dont know if i should try it.. I heard of the rubber eraser wheel you hook up to a compressor but thats 100$ lol
all lies,eraser wheel s like 13.00 and u hook it up to a drill and then get alcohol and wipe clean,I got the eraser whee hit me up
 
Posted by slidewayz94 (Member # 3101) on :
 
I just removed a bunch of stickers and graphics off my jet ski. Used a heat gun, plastic razor blade, 3M Adhesive remover.

Wash and wax after
 
Posted by dubfive-0 (Member # 8965) on :
 
heat gun + plastic puddy knife & some rubbing compound & wax to finish it off
 
Posted by 50Reasons (Member # 6452) on :
 
Oven off
 
Posted by LX306hatch (Member # 9151) on :
 
i have been in the auto body industry my whole life i have been there done that words of advice dont use gu gone it duls clear you could use a wax and grease remover but it will take longer

the best way to take off double side tape such as the stuff that holds on side moldings on the door ect.... is the eraser wheel then buff it to make it look like it was never there also depends on the color of paint it might be brighter up inder the molding or whatever you took off it but eraser wheel the only and the best but even using that is risky to damage the clear coat be carefull good luck

[patriot]
 
Posted by hard jokur (Member # 3360) on :
 
Becareful with the eraser. The shop that did my car burned my mouldings and now I have to replace them.
 
Posted by Luke87GT (Member # 21) on :
 
Solvent X
 
Posted by 50Reasons (Member # 6452) on :
 
quote:
Originally posted by 50Reasons:
Oven off
Realy works and does not go past clear coat spray and let sit for 8 min and wipe off that easy
 
Posted by 73 on DUBS (Member # 5677) on :
 
eraser wheel the best thing u could use
wont damage paint either wipe the excess off
with thinner then use rubbing compound and wax
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com