This is topic My new project: '99 P71 w/ 5speed in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=040902
Posted by 306notchback510 (Member # 6204) on :
 
Started a little new project to my P71 by switching it to a 5speed [Big Grin] . Here is a couple of current pics [Cool] .
-

-

-

[ March 10, 2010, 09:29 PM: Message edited by: 306notchback510 ]
 
Posted by 89bluenotch (Member # 7454) on :
 
That will be fun!!!
 
Posted by 89foxstang (Member # 5908) on :
 
thats gonna be cool! did you take the cluster out of a mustang or something? i wonder about clutch cable... or is this a pretty common swap? awesome project though ! [burnout]
 
Posted by 306notchback510 (Member # 6204) on :
 
Yes it will be hella fun cause the rearend is a 3:73 with trac loc. Just the pedals are off a mustang and the clutch cable is going to be out of a stock mustang. Got most of the parts from a wreck Mach 1. If anybodys got a stock '01-'04 clutch cable I need one. I'll post more pics as I do more
 
Posted by 50 Deep (Member # 6216) on :
 
Wo what all do you need to do for the swap? Using a t-45 or tremec 3650? Custom driveshaft and trans mount? Cutting the floor board?
 
Posted by 306notchback510 (Member # 6204) on :
 
on vic's you can use either a t-45 or the tremec 3650 ( which is what i have), a stock pedal assembly off an '01-'04 mustang ( u got to cut it out and weld the tube on to the vic's assembly), the mustang yoke for the trans ,make a little notch on the stock cross member and make the drive shaft a little longer. I'll post more pics as soon as i get more stuff done
 
Posted by ugotsmoked (Member # 6069) on :
 
i have the clutch cable
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com