This is topic **FASTBACK MUSTANG TT 347 BUILD THREAD** in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=035488

---

Posted by SIC9250 (Member # 8216) on :
 
WILL KEEP POSTED THROUGHOUT BUILD...66 FASTBACK TWIN TURBO BOSS 347,ALL CHRIS ALSTON CHASSIS WORKS COMPONENTS,TREMEC 6 SPD..BUILT BY DARRYLS FABRICATION SAC. CA. (MY DAD)

BUILD PROGRESS..




 

---

Posted by SIC9250 (Member # 8216) on :
 
FULL AIR RIDE TECH. TOO BTW..


 

---

Posted by SIC9250 (Member # 8216) on :
 

 

---

Posted by SIC9250 (Member # 8216) on :
 


ALOT OF THE CAR IS IN MACH UP RIGHT NOW JUST MAKING SURE EVERYTHING IS PERFECT BEFORE BEING BOLTED UP/WELDED IN PLACE...ILL KEEP EVERYONE POTED DURING THIS SICK ASS BUILD...THANKS..
 

---

Posted by 65mustang408 (Member # 8681) on :
 
ive seen it in person and i can vouch for this car. its gonna be fuckin nasty!
 

---

Posted by hes2quick (Member # 8916) on :
 
Wow man you can for sure tell that fastback is gonna end up badass and done the right way..
 

---

Posted by Pure Stang (Member # 7251) on :
 
badass
 

---

Posted by 93 CHP (Member # 8240) on :
 
looks sick bro
 

---

Posted by 1SLOWLX (Member # 558) on :
 
Nice car someone got Some $$$ tied up in that thing
 

---

Posted by Greasy (Member # 5258) on :
 
That is one sweet ride...What size turbos are those?
 

---

Posted by itznotahighway (Member # 7934) on :
 
is that strictly gonna be a drag car?

if your gonna be driving a lot you should have gone with a ladder bar setup from alston...
 

---

Posted by 91CHP_Coupe (Member # 7686) on :
 
Very clean cant wait till you finish it........
 

---

Posted by 50 Deep (Member # 6216) on :
 
That's gonna be one bad ass mcnasty car.

Im sure in the near future we will see 1slowLX parting it out & selling as a roller. Lol

[ March 01, 2009, 10:20 PM: Message edited by: 50 Deep ]
 

---

Posted by 1SLOWLX (Member # 558) on :
 

quote:

---

Originally posted by 50 Deep:
That's gonna be one bad ass mcnasty car.

Im sure in the near future we will see 1slowLX parting it out & selling as a roller. Lol

---

lol Im retired after this vert I quit Im sick of these parts everywhere and just want to finish my own shit
 

---

Posted by F.or O.nly R.eal D.rivers (Member # 8971) on :
 
Man Chris Allston makes some bad ass suspensions!Im gonna buy my roll cage from him.Now thats the REAL way to pimp a ride
 

---

Posted by 1sick65 (Member # 3957) on :
 
how wide are those front wheels?
 

---

Posted by 65mustang408 (Member # 8681) on :
 
they are just mock up wheels. i believe there 17 by 9.turbos are 57mm, and 4 links are fine for the street. i run mine (when it ran) all the time no problems.if it was a road race car then it wouldn't be the best but its not.this thing is gonna be 700rwhp plus...your gonna want it to hook in a straight line.
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by 65mustang408:
they are just mock up wheels. i believe there 17 by 9.turbos are 57mm, and 4 links are fine for the street. i run mine (when it ran) all the time no problems.if it was a road race car then it wouldn't be the best but its not.this thing is gonna be 700rwhp plus...your gonna want it to hook in a straight line.

---

well thanks bud u got it covered lol...
 

---

Posted by 532Fastback (Member # 1482) on :
 
Looking good. What kind of tranny is that? I am hoping i don't have to cut the whole trans tunnel out but i already cut out half the firewall just to get the motor and bellhousing to fit

[ March 01, 2009, 11:55 PM: Message edited by: 532Fastback ]
 

---

Posted by 65mustang408 (Member # 8681) on :
 
no problem bud.its a lazy day taken care of the kid so nothing to do but look for parts on the net.its a t56 and the motor is set back so far that the firewall had to be cut to be cut there fore moving the big t56 back into the tunnel requiring cutting. 532fastback with your front suspension and big block its hard to tell. they make pre fab tunnel kits anyways so no big deal.
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by 65mustang408:
no problem bud.its a lazy day taken care of the kid so nothing to do but look for parts on the net.its a t56 and the motor is set back so far that the firewall had to be cut to be cut there fore moving the big t56 back into the tunnel requiring cutting. 532fastback with your front suspension and big block its hard to tell. they make pre fab tunnel kits anyways so no big deal.

---

damn bro OWNING this thread haha lol i like it i dont gotta do all the work
 

---

Posted by 532Fastback (Member # 1482) on :
 

quote:

---

Originally posted by 65mustang408:
no problem bud.its a lazy day taken care of the kid so nothing to do but look for parts on the net.its a t56 and the motor is set back so far that the firewall had to be cut to be cut there fore moving the big t56 back into the tunnel requiring cutting. 532fastback with your front suspension and big block its hard to tell. they make pre fab tunnel kits anyways so no big deal.

---

i am just going to make my own tunnel. Definitely like your guys work. What color you guys going t paint it?
 

---

Posted by SIC9250 (Member # 8216) on :
 
its going to be the black w/ gold stripes like a shelby clone...sitting on the ground tucking 18s with a huge f*&%$#ng tire in the rear..omg this car is gonna be ridiculous...
 

---

Posted by 1sick65 (Member # 3957) on :
 
i curious to know how the 17*9 will fit with the MII front end
 

---

Posted by 65mustang408 (Member # 8681) on :
 
haha here i go again.its not a mustang 2 frontend.. its a chis alstons front end i think either a chevy one or a universal one.i run a m2 front end and i have a 9 1/2 by 17 in front with 275/35/17 with tire almost completely cover by the fender with no problems.i had to use a 1/8" spacer to keep it from rubbing the sway bar.fuck this car "shits jank!"
 

---