This is topic need help removing powder coat in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=033305
Posted by 92_chp (Member # 5574) on
:
What is the easy way to strip it, without sandblasting??
Thanks guys
Posted by BlueOvalRacing (Member # 1531) on
:
Permatex gasket remover in a spray can.
Posted by N8 (Member # 6048) on
:
My friend had success with that aircraft paint removal stuff. But it was messy as hell.
Posted by Hozr (Member # 6196) on
:
gasket remover or even better kleen strip aerosol cans from the hardware store.
Spray it on, let it sit a few, remove with a metal paint scraper. Repeat if necessary. Final coat I used Kleen Strip and a wire brush. Touched up with a green scotch brite. Wear gloves and glasses. Shit burns like crazy. And makes a huge mess!
Fueled by Ford Mustang Owners
on CaliforniaFords.com