This is topic Video of my 03 GT project in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=032697
Posted by procharger98 (Member # 6091) on :
 
Well i don't post on here to much I thought I better start LOL. I drive a 2003 GT procharged nothing big right now just waiting for the motor to POP!!! And will be going with a 900 MMR. In till that happens I have been focusing on the Drive Tran and suspension. I went to the dyno with the car but the clutch gave out on top end. When I got back I took it to the track and with the bad clutch and was able to get a 12.6 @ 112 1.9 60FT in Redding with BFG DR. so this last month or two I have been buying all my parts.

8.8 squared and welded housing
Eaton 8.8 Posi Diff.
31 spline Moser axels
373 gears
Mac Girdle
MMR Rear Coilover kit
Pro stars all the way around
275 50 15 MT DR.
DFX Clutch
Fidanza Alum. flywheel
firo micro click adjuster
firo quick release quad.

Im going for low 12's

here is a video of my car on the dyno and at the track.

http://www.youtube.com/watch?v=c5v-QXfEZJ0

[ May 28, 2008, 01:39 AM: Message edited by: procharger98 ]
 
Posted by ugotsmoked (Member # 6069) on :
 
nice my car should run about the same numbers.
 
Posted by procharger98 (Member # 6091) on :
 
quote:
Originally posted by ugotsmoked:
nice my car should run about the same numbers.
ya you made some good power for only 7psi.
 
Posted by 93 CHP (Member # 8240) on :
 
nice car man
 
Posted by procharger98 (Member # 6091) on :
 
quote:
Originally posted by 93 CHP:
nice car man
thanks man
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com