This is topic "66" roller 5.0 motor GT40P heads??? in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=032181
Posted by CaliCoop (Member # 7031) on
:
I have a 1966 mustang with a 89 5.0 motor with GT40p heads. looking to see if some one knows what headers will work on this style of heads in this style of car? there are lots of headers for the foxbody, but i need some help with this body, any kind of info will help thanx guys
Posted by lowriderryda (Member # 7397) on
:
you should be able to use any headers that will fit 66 mustang
Posted by Dave50 (Member # 5238) on
:
No, because the spark plugs are angled different. I dont think there a production header available for your needs. Get rid of the heads and go normal style plug or pay for custom headers.
Posted by Blind (Member # 3052) on
:
time to get creative with the spark plug boots IMO
Posted by MUSTANG65_347 (Member # 7249) on
:
I had to have a set custom made for my mustang. I have been told that MAC sells a set of shorties that will fit and supposedly the Ford Racing shorties will also fit.
Posted by warhorse58gt (Member # 7702) on
:
why not just run a shorty off a fox? all you need to do would get your exhuast flanges changed to the ball & socket type..
Posted by 1FAST89GT (Member # 5071) on
:
tri y will not work?
Posted by BlowN67 (Member # 4229) on
:
quote:
Originally posted by warhorse58gt:
why not just run a shorty off a fox? all you need to do would get your exhuast flanges changed to the ball & socket type..
foxbody heards dont fit our yr cars. their headers shoot striaght out then go back. our cars need to be as close to the block as possible
Posted by stangin' (Member # 514) on
:
http://www.macperformance.com/store/product1.cfm?SID=3&Product_ID=854
these shorty headers are made for the gt40p heads
Fueled by Ford Mustang Owners
on CaliforniaFords.com