This is topic Gears? Gears? Anyone need gears done? in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=028374

---

Posted by JohnB (Member # 969) on :
 
If you need a set installed, lemme know!
 

---

Posted by DLo (Member # 6133) on :
 
I do.... but I have no cash
 

---

Posted by J24I (Member # 2598) on :
 
I have new 373's and powertrax locker that need to be put in..pm me with how much

thanks
-Jayson
 

---

Posted by LS1EATR (Member # 2702) on :
 
pm sent
 

---

Posted by svt306snake (Member # 1967) on :
 

quote:

---

Originally posted by JohnB:
If you need a set installed, lemme know!

---

quote:

---

Originally posted by JohnB:
If you need a set installed, lemme know!

---

how much for a set of fms 3.73 installed in a 90'?
 

---

Posted by JohnB (Member # 969) on :
 
All PMs replied to. Anyone else?
 

---

Posted by TrueBlue (Member # 1063) on :
 
I don't need any installed by mine are howling like the wind.
 

---

Posted by NiftyWhiteFifty (Member # 4320) on :
 
PM sent!
 

---

Posted by sikstang916 (Member # 6704) on :
 
Can u cum to my house and install a set of 3.73s and how much???
 

---

Posted by venomous99 (Member # 1917) on :
 

quote:

---

Originally posted by sikstang916:
Can u cum to my house and install a set of 3.73s and how much???

---

quote:

---

Originally posted by venomous99:

quote:

---

Originally posted by sikstang916:
Can u cum to my house and install a set of 3.73s and how much???

---

not sure if he'd want to come after reading that.

---

It's ok, he offered up his GF for payment in lieu for the gears.

PMs sent!
 

---

Posted by ugotsmoked (Member # 6069) on :
 
how much for labor? Basic gear swap in a 02 gt.
 

---

Posted by TRIXSNK (Member # 2844) on :
 
John

I'm still going to have ya take a look at my F150's rear end "hum" but i'll be in Tahoe this week and next week so probably not until after that.

How much lead time do ya need for me to schedule something?

Damnit and the Cobra is now leaking gear oil all over my girls new garage so it looks like i'll be workin on that thing to seal it up while you fix my truck

[ February 05, 2007, 02:27 PM: Message edited by: TRIXSNK ]
 

---

Posted by hidnn.o.s. (Member # 1219) on :
 
John, I hit the 12's without the gears, so let me know when you have time now please and we'll toss in the 4.10's.
 

---

Posted by cummins (Member # 5931) on :
 
Hey Johnny Buttercup what city are you located in? I may need a swap in a dana 60. You know anyone locally that can turn down shafts and respline them?
 

---

Posted by JohnB (Member # 969) on :
 
I'm in Fairfield. I don't know of anyone locally that does them, but I'm sure there's someone in SF or Sac that takes care of them. Unless it's something way trick, it's just as cheap to buy new shafts nowadays...
 

---

Posted by cummins (Member # 5931) on :
 
ya I can get them from dutchman with custom cut lengths and I know someone in sac that does it also. Just wondering if you work with someone who does that stuff. I'm looking to narrow the axle 5 or so inches. So you can do the gears on it? Maybe I'll just drop off the axle to you then. This is for a friend that wants to build a crawler so gears are going to be 5.13 or 5.38.
 

---

Posted by 5point0707 (Member # 5893) on :
 
PM sent!

 

---

Posted by JohnB (Member # 969) on :
 
Anyone need gears done??
 

---

Posted by Chris83179 *pbr* (Member # 6017) on :
 
Kudos to JohnB! Did an awesome job today on my 4.10's.
 

---

Posted by 64valves*pbr* (Member # 7295) on :
 
yeah.it was good to meet you john.to anyone considering his work i would definitely recommend him.fast and precise
 

---

Posted by JohnB (Member # 969) on :
 
No problem guys- thanks for stoppin' by!
 

---

Posted by r3dn3ck (Member # 3192) on :
 
how much? I have a set of 3.55's and a diff replacement and axle bearings to change.

I have a MM torque arm and panhard bar. LMK if that's going to be problematic.
 

---

Posted by hidnn.o.s. (Member # 1219) on :
 
John, pm me a time/amount when you can do the 4.10's in the 06 please. We buzzed on/off the pinion nut here at work so it should be ok this time?

Thanks,

Don
 

---

Posted by JohnB (Member # 969) on :
 
Don- pm sent, lemme know-
 

---

Posted by cummins (Member # 5931) on :
 

quote:

---

Originally posted by cummins:
ya I can get them from dutchman with custom cut lengths and I know someone in sac that does it also. Just wondering if you work with someone who does that stuff. I'm looking to narrow the axle 5 or so inches. So you can do the gears on it? Maybe I'll just drop off the axle to you then. This is for a friend that wants to build a crawler so gears are going to be 5.13 or 5.38.

---

quote:

---

Originally posted by cummins:

quote:

---

Originally posted by cummins:
ya I can get them from dutchman with custom cut lengths and I know someone in sac that does it also. Just wondering if you work with someone who does that stuff. I'm looking to narrow the axle 5 or so inches. So you can do the gears on it? Maybe I'll just drop off the axle to you then. This is for a friend that wants to build a crawler so gears are going to be 5.13 or 5.38.

---

Sorry it took so long for me to get back with you I was busy working on other people's cars and also busy chatting on the internet. Does your friend still want that stuff done? What type of axles? If so let me know!!

JohnB

---

quote:

---

Originally posted by cummins:

quote:

---

Originally posted by cummins:
ya I can get them from dutchman with custom cut lengths and I know someone in sac that does it also. Just wondering if you work with someone who does that stuff. I'm looking to narrow the axle 5 or so inches. So you can do the gears on it? Maybe I'll just drop off the axle to you then. This is for a friend that wants to build a crawler so gears are going to be 5.13 or 5.38.

---

Sorry it took so long for me to get back with you I was busy working on other people's cars and also busy chatting on the internet. Does your friend still want that stuff done? What type of axles? If so let me know!!

JohnB

---

Nice. Do you feel better making up posts?
 

---

Posted by cummins (Member # 5931) on :
 
John I seriously had the guy looking for a gear install but since you didn't get back to me he went elsewhere. I was just trying to throw you some work.

In the future I'll be doing a gear swap front and rear and I'll be looking for someone to do the install. Both are dana 44s. I'm picking up the axle this weekend in Sac. If you're not interested in doing the work then that's fine. I just thought I'd use someone from cafords since I'm on this site a lot.
 

---

Posted by JohnB (Member # 969) on :
 
You asked about shortening a axle and shafts, I replied.
If you honestly need it done, PM me.
 

---

Posted by cummins (Member # 5931) on :
 
I mentioned that he is doing a crawler and wanted to do gears and either 5.13s or 5.38s. Anyway I will need gear work in the future. I am just waiting to blow up this front axle which should not take long with the way I drive. I'll be going with 4.56s or 4.88s.
 

---

Posted by Pittsburg Mustang Owner (Member # 6100) on :
 
John can you PM me a price on a install on some lowering springs. I may want to do it Sunday or maybe Saturday after 2pm if possible
 

---

Posted by FivePointSlow (Member # 4565) on :
 
Another A+ endorsement for JohnB. Great work done fast.

And he fixed one of my F'ups... the car drove home like a different car. Thanks again!


Ryan
 

---

Posted by JohnB (Member # 969) on :
 
No prob, enjoy the 4.10's and all 8 cylinders!
 

---

Posted by Black88GT (Member # 394) on :
 
Hey John, how about my 99 f350 drw? Its 2wd.
 

---

Posted by JohnB (Member # 969) on :
 

quote:

---

Originally posted by Black88GT:
Hey John, how about my 99 f350 drw? Its 2wd.

---