This is topic Procharged Cobra in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=026256
Posted by sn8k (Member # 574) on :
 
Well, my 01 Cobra build is almost comeplete (just a few little things left to do). Daniel - NextGen Autosport - let me know the numbers that the new Procharger put down.

451.0 RWHP - 404.0 RWTQ

Even though I bought the 8lb kit - the blower is actually making closer to 10lbs. Why this is occuring we don't know precisly, however I did have to replace my stock harmonic balancer with an aftermarket one, and it may be slightly larger. I will have to look into the specs on that... and I should have an answer on why this is occuring soon.

Also, the shop emailed me the data files for all the runs, but I am unable to view them, even with the Dynojet software installed (I don't know if he sent me the complete run files, or even if I have the right software installed to read them). I'll have to figure out how to get that stuff to work next week. But the point here is that the shop is not trying to hide anything.. and I'll soon be able to view all the runs and see what type of timing curve, a/f, ect. so I know what I've got. Props to NextGen for being upfront with everything.

I'm using the BOV that Procharger sent - and Daniel said it's loud enough to hear quite easily after you get off the throttle. He says it sounds bad ass - so I'm looking forward to hearing it myself when I go for a test drive this week before I take the beast home. It may not add any horsepower, but it adds some grin factor, so it's all good.

I grabbed a few pics. The front radiator cover hasn't been installed yet, and I haven't dressed out the other stuff, but you can get the general idea. Yep, that's all chrome there - the only thing polished is the procharger. [Big Grin]

-

-

-

Should be able to pick it up next week. I'm stoked!!!!! [Whoo Whooooo!]
 
Posted by Cobra5.0Jeep (Member # 1482) on :
 
Your making close to 10lbs because its a Procharger, best supercharger made! [worship]

EDIT: You have a metal throttle hose, where did you get that or have it made?

[ June 11, 2006, 03:06 AM: Message edited by: Cobra5.0Jeep ]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by Cobra5.0Jeep:
its a Procharger, best supercharger made! [worship]
Damn skippy it is [patriot]
quote:
You have a metal throttle hose, where did you get that or have it made? [/QB]
I had all the hoses, brackets, valve covers, intake manifold, radiator crossover pipes, overflow tank, ect. chromed over at Valley Plating in Santa Clara. They did some good work - it's not perfect (you can see some flaws when you get very close) but overall I'm very happy with the work they did. [Smile]
 
Posted by 94gt (Member # 3060) on :
 
Damn! Thats a beaut you have there! What's the complete setup on your cobra?
And a few more pics wouldnt hurt.. [Razz]
 
Posted by bottled02GT?? (Member # 1772) on :
 
im down there all the time, u got a bad ass ride, lots a chrome [Big Grin]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by 94gt:
Damn! Thats a beaut you have there! What's the complete setup on your cobra?
And a few more pics wouldnt hurt.. [Razz]
Thanks for the props bro [Smile]

I just had a lot of crap installed so I know I'm gonna miss a few things. Besides the Procharger, 60MM Acufab TB, 90mm Lightning MAF, 42# injectors, focus fuel pump, JBA 1 5/8" ceramic shorties, Magnaflow catted x-pipe, Magnapacks, Spec Stage II clutch, built live axel (31 spline Moser axels, auburn posi, FRP 373 gears), Steeda Adjustable Billet Lower Control Arms, Steeda uppers, Bilstiens, EradiSpeed rotors (GT rears), Hawk pads, MM Full length subs, MM Caster/camber plates, MM 4-Point K-Member Brace, MM end links & bushings, TriAx, Autometer gauges (boost, fuel, wideband a/f), billet aluminum fuel door, 315s (rear) 255s (front) GS-D3s, 17" Cobra R's (9" fronts, 10 1/2" rears"), and a few other things. Just you typical modded 01 Cobra... nothing special besides the under hood bling.

-

-

old pics
-

-

[ June 11, 2006, 04:39 AM: Message edited by: sn8k ]
 
Posted by forced331 (Member # 1270) on :
 
Good numbers and one badass snake! [worship]
 
Posted by boostin1.8 (Member # 868) on :
 
dude mark when you get that bad boy home let me know cause i want to come check it out! That shit is bad ass bro, ive been waiting 5 years to see that car be modded [Smile]
 
Posted by Cobra5.0Jeep (Member # 1482) on :
 
-
No i mean where did you get the metal pipe for your throttle? We've been looking for a oval one for a while and we can't find it. Did you get it made?
 
Posted by 00NIGHTMARE (Member # 1010) on :
 
Right on Mark! I heard your numbers yesterday, I bet you can't wait drive it with the procharger on it. [Cool]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by Cobra5.0Jeep:
No i mean where did you get the metal pipe for your throttle?
I'm not following ya - could you photoshop the pic pointing to what you're talking about. Post it or email it to markk@sn8k.com
Sorry for being dense [Confused]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by 00NIGHTMARE:
Right on Mark! I heard your numbers yesterday, I bet you can't wait drive it with the procharger on it. [Cool]
Very much lookin forward to it Scott. It'll be fun to see the difference between the 01 and 03... but I do think I'll like the 01 better now that it has the live axel - wheel hop is ghey [Roll Eyes]
 
Posted by Cobra5.0Jeep (Member # 1482) on :
 
it won't let me save the picture to edit it. Keeps telling me the file isn't an image file.
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by Cobra5.0Jeep:
it won't let me save the picture to edit it. Keeps telling me the file isn't an image file.
OK - just hit "ctrl" and "Print screen" on your keyboard at the same time - and it will put a pic of your screen in your clipboard so you can paste it into a pic file.

Regardless... everything you see that relates to the Procharger was purchased from the manufacturer. So you should be able to order one. Just call NextGen and talk to Daniel - he'll hook you up. [Smile]

[ June 11, 2006, 04:17 PM: Message edited by: sn8k ]
 
Posted by RiddlerGT (Member # 113) on :
 
very nice, love the cobra
tires look perfect
 
Posted by Black 02 SS (Member # 5939) on :
 
I remember seeing your snake the last couple times I stopped at Nextgen. Looking clean Mark! wish I could've been there to hear it on the dyno.
 
Posted by mustangdude24 (Member # 6581) on :
 
Nice car bro. [patriot] I think I've seen your car before. Is it at that shop on Mission Blvd?
 
Posted by Yames (Member # 5291) on :
 
my god, that's all I have to say.... damn
 
Posted by andyman_2k01 (Member # 1448) on :
 
very nice looking car and congrats on the #'s!
 
Posted by uh0h50 (Member # 3125) on :
 
i see your car at nexgen everyday when i pass by the shop.. great looking car.
 
Posted by 50 Deep (Member # 6216) on :
 
those tires had better be bald the day you get it back
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by RiddlerGT:
very nice, love the cobra
tires look perfect
wtf - where you been keeping yourself Nate. Been a long time bro... hope you been using it to get a good education, or at the very least, a lot of girls [Big Grin]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by mustangdude24:
Nice car bro. [patriot] I think I've seen your car before. Is it at that shop on Mission Blvd?
Thanks for the props [Smile] - yeah, the shop is on Mission in Hayward. It's been there for awhile now... but not much longer [Whoo Whooooo!]
 
Posted by aslowdodge (Member # 854) on :
 
Wow. That car is pretty trick. I am in pleasanton and will look for it since you live in the next town over. good job
 
Posted by two-gun kid (Member # 5891) on :
 
quote:
Originally posted by sn8k:
quote:
Originally posted by mustangdude24:
Nice car bro. [patriot] I think I've seen your car before. Is it at that shop on Mission Blvd?
Thanks for the props [Smile] - yeah, the shop is on Mission in Hayward. It's been there for awhile now... but not much longer [Whoo Whooooo!]
what do you mean? are they moving to a bigger place?
 
Posted by TRIXSNK (Member # 2844) on :
 
quote:
Originally posted by Cobra5.0Jeep:
-
No i mean where did you get the metal pipe for your throttle? We've been looking for a oval one for a while and we can't find it. Did you get it made?
I think Dana was asking tubing that leads from the maf to the TB. Once side of it is round and the other oval to match the TB.

[Cool] car and congrats on the new #'s [patriot]

Are you planning on bringing it to the track or is it mainly for street use?
 
Posted by 92stangLX (Member # 3252) on :
 
Nice car for sure [patriot]
 
Posted by 00NIGHTMARE (Member # 1010) on :
 
quote:
Originally posted by two-gun kid:
what do you mean? are they moving to a bigger place?
I think he means his car wont be there for much longer. Oh yeah and Mark, 4:30's [burnout] [patriot]

[ June 12, 2006, 11:54 AM: Message edited by: 00NIGHTMARE ]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by two-gun kid:
quote:
Originally posted by sn8k:
quote:
Originally posted by mustangdude24:
Nice car bro. [patriot] I think I've seen your car before. Is it at that shop on Mission Blvd?
Thanks for the props [Smile] - yeah, the shop is on Mission in Hayward. It's been there for awhile now... but not much longer [Whoo Whooooo!]
what do you mean? are they moving to a bigger place?
No - I mean my car won't be there much longer [dance]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by TRIXSNK:
quote:
Originally posted by Cobra5.0Jeep:
-
No i mean where did you get the metal pipe for your throttle? We've been looking for a oval one for a while and we can't find it. Did you get it made?
I think Dana was asking tubing that leads from the maf to the TB. Once side of it is round and the other oval to match the TB.

[Cool] car and congrats on the new #'s [patriot]

Are you planning on bringing it to the track or is it mainly for street use?
OIC - yes, those were ordered from Procharger "unfinished" and then sent to Valley Plating for chroming.

Car is mainly for street use, but it will see the track in the future. Kinda why we went with the GT rotors on the rear was to be able to run 15" rims on the back - better for slicks. I'm honestly not a track driver by any stretch of the imagination - never been there. I'll work up to it, but Daniel will be getting me a "best run" to shoot at - driving the car for a few runs to see what it's capable of. Should be fun [Big Grin]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by 00NIGHTMARE:
Oh yeah and Mark, 4:30's [burnout] [patriot]
[Eek!] Damn bro... I guess first, second AND thrid will all be "mr toads wild ride" [dance]
That thing is gonna be sick [worship]
 
Posted by 00NIGHTMARE (Member # 1010) on :
 
quote:
Originally posted by sn8k:
quote:
Originally posted by 00NIGHTMARE:
Oh yeah and Mark, 4:30's [burnout] [patriot]
[Eek!] Damn bro... I guess first, second AND thrid will all be "mr toads wild ride" [dance]
That thing is gonna be sick [worship]
Haha nah man, I meant for you. You should step it up to 4:30's [Razz]
 
Posted by sn8k (Member # 574) on :
 
quote:
Originally posted by 00NIGHTMARE:
quote:
Originally posted by sn8k:
quote:
Originally posted by 00NIGHTMARE:
Oh yeah and Mark, 4:30's [burnout] [patriot]
[Eek!] Damn bro... I guess first, second AND thrid will all be "mr toads wild ride" [dance]
That thing is gonna be sick [worship]
Haha nah man, I meant for you. You should step it up to 4:30's [Razz]
That is not beyond the realm of possibilities. Gonna depend on what will work best in the 1/4, on the street, and how much abuse the stock 3650 can handle. Why not 4.56s? [Big Grin]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com