This is topic My dyno sheets... (pics) in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=024106
Posted by 94gt (Member # 3060) on
:
The power band wasnt smooth, there were ripples in several sections...
Here is the A/F read out... It's not very smooth either.
Posted by hidnn.o.s. (Member # 1219) on
:
You going to get it tuned to clean those lines and your AFR
There's deffinitely more power there imo
[ January 16, 2006, 07:15 PM: Message edited by: hidnn.o.s. ]
Posted by 94gt (Member # 3060) on
:
quote:
Originally posted by hidnn.o.s.:
You going to get it tuned to clean those lines and your AFR up
Yeah, I was originally planning on doing that after I put this new variable length runner intake on. (I'll get both the long and short runners)
There is another guy on the registry that has similar mods and made a base run of 272 and after the tune, he got 295. So, is this a normal "good" run? (aside from the lines and a/f read out)
Posted by GOT 50 (Member # 1960) on
:
I made the same exact power in my 93 vert.
Ran a 12.9 at 107
Posted by Apexmotorsports (Member # 5307) on
:
Looks like you need a tune...most Mach's we've tuned have gotten over 300RWHP.
Posted by 94gt (Member # 3060) on
:
quote:
Originally posted by Apexmotorsports:
Looks like you need a tune...most Mach's we've tuned have gotten over 300RWHP.
How much do you charge for dyno tunes again? I'm forgetful..
After I install this intake and get it running... I'm gonna be hurting for a dyno tune.
Posted by Apexmotorsports (Member # 5307) on
:
We are currently updating our prices and will let you know tomorrow.
Posted by UNLUCKIER (Member # 435) on
:
What intake are you going with? And what are your current mods?
Posted by Mach0ne351 (Member # 927) on
:
quote:
Originally posted by Apexmotorsports:
Looks like you need a tune...most Mach's we've tuned have gotten over 300RWHP.
yup. chris's old mach had a crap load of power, with almost the same mods....get it tuned brotha....youll gain A LOT more power...
marek
Posted by 94gt (Member # 3060) on
:
quote:
Originally posted by UNLUCKIER:
What intake are you going with? And what are your current mods?
A variable runner length...
Mods:
Diablo Tuner
K&N Filter, C&L inlet tube
Bassani O/R X, SLP LMII Catback
H&R Super Sports, MM Adj. LCA's
18x9(265/35) and 18x10(295/35) Chrome Fr500's
Posted by 03SHKER (Member # 1397) on
:
Not to go blowin out things that the owner said... but most Mach's came close to 300rwhp. Mine (I don't know why) made the most power/torque with the least mods. 1 came in w/ LT's & a ported lower and it made a little more than mine did. However the one we have in the shop now, gettin a polished KB is going to be a tad quicker... Just a tad.
Posted by 03SHKER (Member # 1397) on
:
*Edit* Marek can attest to this, my car w. just a catted X pipe & CAI made 286 & 311 at the ground.
[ January 17, 2006, 10:39 AM: Message edited by: 03SHKER ]
Posted by 94gt (Member # 3060) on
:
Chris, how much is a dyno tune there?
Posted by 94gt (Member # 3060) on
:
quote:
Originally posted by 03SHKER:
*Edit* Marek can attest to this, my car w. just a catted X pipe & CAI made 286 & 311 at the ground.
To be honest, on one of the runs, I did see 285 and 310... but I think the engine got heat soaked... I didnt get a copy of those runs just because his wideband o2 sensor was acting up a little.
Posted by 03SHKER (Member # 1397) on
:
Jessie, as soon as Mike calls w/ the updated and lower pricing, I'll let you know. I'm curious myself actually, seeing as I have to know this sort of stuff. Haha.
Posted by 94gt (Member # 3060) on
:
quote:
Originally posted by 03SHKER:
Jessie, as soon as Mike calls w/ the updated and lower pricing, I'll let you know. I'm curious myself actually, seeing as I have to know this sort of stuff. Haha.
lol, that would be a little helpful!
Thanks man
Posted by hidnn.o.s. (Member # 1219) on
:
If you are interested in making the drive to Rohnert Park I can look into getting your car tuned here. Let me know if you are interested.
Don
Posted by 94gt (Member # 3060) on
:
quote:
Originally posted by hidnn.o.s.:
If you are interested in making the drive to Rohnert Park I can look into getting your car tuned here. Let me know if you are interested.
Don
Do you tune using Diablo? That is the tuner that I currently have
Posted by Mach0ne351 (Member # 927) on
:
quote:
Originally posted by 03SHKER:
*Edit* Marek can attest to this, my car w. just a catted X pipe & CAI made 286 & 311 at the ground.
yup. then chris added a magnapak catback it made 299-301rwhp....and 317tq....so, those mach1s are torque little bitches..
Posted by hidnn.o.s. (Member # 1219) on
:
quote:
Originally posted by 94gt:
quote:
Originally posted by hidnn.o.s.:
If you are interested in making the drive to Rohnert Park I can look into getting your car tuned here. Let me know if you are interested.
Don
Do you tune using Diablo? That is the tuner that I currently have
Ahhh, sorry, I did see that you had said that in an earlier post. SCT here.
Goodluck,
Don
Posted by 03SHKER (Member # 1397) on
:
Okay, new pricing. For N/A cars ONLY... $399.99 for the chip & tune, no matter the time length.
Posted by Mach0ne351 (Member # 927) on
:
no shit??? that's a DEAL!!!!!!!!!!!!! chris, do you guys take orders for the new Accufab 99/01 CObra TB??? cause after i get that and install some pulleys, im gonna get a tune with you guys. i have the sct chip just sitting in my bag stilll lol...
Posted by 03SHKER (Member # 1397) on
:
Do I take orders from an Accufab TB? Hell no. I don't take orders from a piece of metal. Yeah I can get the TB.
Fueled by Ford Mustang Owners
on CaliforniaFords.com