This is topic check out this motor in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=022664

---

Posted by BlowN67 (Member # 4229) on :
 
here's my buds set up.. lmk what u think

R302/347
T-trim 19lb pullies
sonny bryant crank
carillo rods
venilla pistons
canfeild stg3 , with rocker girldes
hyd roller cam (600's)
stg3 gt40 lower
Hogan's upper
gt40 nitruos plate system
75/75mm throtle body/egr spacer
83lbs injectors
pro-m injector driver
pro-m 91mm maf
mac 1 3/4lt's
mac 3" pro chamber
mac 3" catback

[ October 09, 2005, 11:21 PM: Message edited by: BlowN67 ]
 

---

Posted by Fostang (Member # 3752) on :
 
HMMMM.



 

---

Posted by Fostang (Member # 3752) on :
 
You forgot the T-trim.


edit: yeah thats what I thought.

[ October 09, 2005, 11:22 PM: Message edited by: Fostang ]
 

---

Posted by DOPE 50 (Member # 5892) on :
 
thats nice how many horses is it pushin
 

---

Posted by BlowN67 (Member # 4229) on :
 
waiting on a few final peices an we'll see when its installed an dyno'd .... But I'll take a wild guess in or about 600-800hp.. but we'll see. thanx JOHN
 

---

Posted by Cm4hawks (Member # 5231) on :
 
Looks like a sweet combo
 

---

Posted by BlowN67 (Member # 4229) on :
 

quote:

---

Originally posted by Cm4hawks:
Looks like a sweet combo

---

ya he's got some money in that pile right there
 

---

Posted by uh0h50 (Member # 3125) on :
 
homer voice: "mmm, horsepower." very nice. what kinda stang is this going into?
 

---

Posted by six 5.0 (Member # 3153) on :
 
DAMN
 

---

Posted by BlowN67 (Member # 4229) on :
 

quote:

---

Originally posted by uh0h50:
homer voice: "mmm, horsepower." very nice. what kinda stang is this going into?

---

88 Saleen.. will still have factorya/c an all. and the smallest cowl as posibble to more stock. thanx Guys I'm sure he'll appreciate all the comments.
 

---

Posted by 1FAST89GT (Member # 5071) on :
 
nice
 

---

Posted by 88DroptopGT (Member # 2535) on :
 
Yee an R302! What kind of Engine management will you be using?

Looks sick.
 

---

Posted by BlowN67 (Member # 4229) on :
 
I believe he'll being using stock with a custom chip
 

---

Posted by Cm4hawks (Member # 5231) on :
 
got the flywheel
 

---

Posted by 88DroptopGT (Member # 2535) on :
 
I'm just wondering but how will you lower it in.

Where do you put the chains if the upper intake is installed already? Chains on the header bolts w/load leveler?

I used an EFI lift plate to put mine in.
 

---

Posted by Fostang (Member # 3752) on :
 

quote:

---

Originally posted by 88DroptopGT:
I'm just wondering but how will you lower it in.

Where do you put the chains if the upper intake is installed already? Chains on the header bolts w/load leveler?

I used an EFI lift plate to put mine in.

---

Umm we're all going to get a corner of the engine and drop it in.

It's not like the intake is welded on bro.
 

---

Posted by 88DroptopGT (Member # 2535) on :
 
Okay hah just making sure. I thought there is a different way to install a motor with the upper intake I didn't know about or something.

Thanks.
 

---

Posted by Fostang (Member # 3752) on :
 

quote:

---

Originally posted by 88DroptopGT:
Okay hah just making sure. I thought there is a different way to install a motor with the upper intake I didn't know about or something.

Thanks.

---

It's not ready to be dropped in just yet.

More than anything it's a trial fit then being stripped down for install.
 

---

Posted by JohnB (Member # 969) on :
 
Looks good, now get it installed!!

Gonna cut a big hole in the inner for that powerpipe? Gonna need it to make room for that bypass valve.
 

---

Posted by Fostang (Member # 3752) on :
 

quote:

---

Originally posted by JohnB:
Looks good, now get it installed!!

Gonna cut a big hole in the inner for that powerpipe? Gonna need it to make room for that bypass valve.

---

quote:

---

Originally posted by 88DroptopGT:
Where do you put the chains if the upper intake is installed already? Chains on the header bolts w/load leveler?

---

I pulled and installed my engine by the headerbolts with no load leveler...



mine didn't have any of that nonsense on the front accessories though
 

---

Posted by Cm4hawks (Member # 5231) on :
 
the bypass valve actually sits right next to the radiator and the power pipe fits the stock hole cant go cutting up my saleen now unless i trade it to fostang the the old school
 

---

Posted by Fostang (Member # 3752) on :
 

quote:

---

Originally posted by Cm4hawks:
the bypass valve actually sits right next to the radiator and the power pipe fits the stock hole cant go cutting up my saleen now unless i trade it to fostang the the old school

---

I saw we get the car going....
 

---

Posted by Cm4hawks (Member # 5231) on :
 
ready to help fostang i am going to do it at blown67 house
 

---

Posted by Cm4hawks (Member # 5231) on :
 
i am hoping for about 800 hp
 

---