Author
|
Topic: ca legal ar-15
|
SHOalex
¯
Member # 7720
|
posted
quote: Originally posted by slidewayz94: quote: Originally posted by warhorse58gt: quote: Originally posted by slidewayz94: quote: Originally posted by WildFire532FB: quote: Originally posted by bottled95GT??: Beowulf? This that's the spelling. Find their website.
the .50cal? those are hard to get. Big waiting list.
I would sell my Bewoulf for the right price! My newest rifle was built for $600 after everything.
ddsranch.com had the S&W rifle on sale a couple months ago for $800. Two of my coworkers bought them at that smoking price.
could you send me your spec's on your new rifle..if you like you can just pm me, if you don't want everyone to know. i don't mind putting it together myself.. and for $600 thats a nice price.. i just don't want to get stuck with a crappy fixxed mag...
I have this DPMS upper, and a Del Ton complete lower w/6 pos stock.
$300 upper (bought used from coworker less than 150 rounds thru it, came w/a new UTG rail still in the box, and 200 rounds of ammo. Got a good deal
$220 lower (shipped completely assembled to FFL)
$25 bullet button
$35 DROS
peachstateguns.com had some complete rifles starting at $600 (+$25 to make ca compliant)
Yea building one is a good idea if your looking to cut cost
-------------------- BAM! POW! Right in the kisser.
Posts: 1448 | From: Oakland | Registered: Jun 2007
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
quote: Originally posted by Cm4hawks: I just picked up the Ruger SR-556 it has got to be one of the best out there. Canyon sports and guns in Martinez has them 925 229 4867 you can talk them down on the ruger for 1800
thats a rip off just seen those all day long at the gun show for $1600. the SR556 is a nice gas piston rifle but there are better gas piston rifles and depending on what you going to use it for a D.I. setup may suite your needs. irvington was just running a special for i think it was $1300 OTD on a complete rifle.to the OP what city do you live in? also check calguns.net and do some research im already working on my 3rd and just got my ca legal AK. [ December 24, 2009, 12:32 PM: Message edited by: v-town coupe ]
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
Gnari-Garage
CAFords OG
Member # 3164
|
posted
I put my AR together myself and it cost me @$800, includes all kinds of extra parts!
-------------------- 2017 McLaren 570GT 2019 Audi S5 2017 Tundra 7" Lift, 37" Tires
Posts: 4017 | From: 916-sacramento | Registered: Aug 2003
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
quote: Originally posted by NavidR: I put my AR together myself and it cost me @$800, includes all kinds of extra parts!
pm sent.
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
i just put my second one together for 600. Now i need to find someone that can do duracoating.
-------------------- ./_ _ _ ___ __\ (]]]_ _ o _ _[[[) |\_o_ __ __o_/| |__|..........|__| 68 Fastback 84 CJ7 94 HMMWV 95 GT 03 F350 17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
NvrGoFullRetard
CAFords OG
Member # 1633
|
posted
quote: Originally posted by v-town coupe: quote: Originally posted by Cm4hawks: I just picked up the Ruger SR-556 it has got to be one of the best out there. Canyon sports and guns in Martinez has them 925 229 4867 you can talk them down on the ruger for 1800
thats a rip off just seen those all day long at the gun show for $1600. the SR556 is a nice gas piston rifle but there are better gas piston rifles and depending on what you going to use it for a D.I. setup may suite your needs. irvington was just running a special for i think it was $1300 OTD on a complete rifle.to the OP what city do you live in? also check calguns.net and do some research im already working on my 3rd and just got my ca legal AK.
ive had my cali legal ak for a little over a year now and love it. i also built a spikes tatical .223 and a spikes tatical 7.62 ar-15 for roughly $1000 a piece. there all fun to shoot.
Posts: 2759 | From: PITTSBURG/FAIRFIELD | Registered: Aug 2002
| :
|
|
slidewayz94
CAFords OG
Member # 3101
|
posted
quote: Originally posted by WildFire532FB: i just put my second one together for 600. Now i need to find someone that can do duracoating.
Dana don't u ever check out the commercial/good deals section of calguns?
Their is a very good company always posting specials and they have great feedback from sig and ar15 forums. Don't remember the name though
Posts: 4251 | From: Sac | Registered: Jul 2003
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote: Originally posted by slidewayz94: quote: Originally posted by WildFire532FB: i just put my second one together for 600. Now i need to find someone that can do duracoating.
Dana don't u ever check out the commercial/good deals section of calguns?
Their is a very good company always posting specials and they have great feedback from sig and ar15 forums. Don't remember the name though
for duracoating? i was looking for someone local, i don't like the idea of sending my gun anywhere. I'd rather do it in person make sure they are a honorable person.
I didn't get to go shooting yesterday, my brother works nights and he slept longer than he thought he would so it was dark by the time he woke up. Its all good though i installed my Hood on the Fastback.
-------------------- ./_ _ _ ___ __\ (]]]_ _ o _ _[[[) |\_o_ __ __o_/| |__|..........|__| 68 Fastback 84 CJ7 94 HMMWV 95 GT 03 F350 17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
can some of you guys that built your own rifles. pm me pics and build specs. and how hard was it to put together. i know some of you guys are pros. but i want to do my homework before i just pick one up... thanks guys!
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
heres a pretty good deal:
http://www.calguns.net/calgunforum/showthread.php?t=251781
this plus what ever your lower cost and $20 for a bullet button and your set you will have a complete rifle for $800 or less, depending on the cost of you lower.
there are tons of build guides online calguns has a how to build you lower section also look for "aplinker" or his old name "uclaplinker" he has some pretty good links in his signature section that should pretty much give you the basis you need to get started!
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
warhorse if you lived closer id just say head on over and i'll show you how to put it together i have all the roll pin punches and have done enough of these to get you lower completley together in 10-15min. just fyi if you decide you want a different trigger guard or some sort of fancy tactical bolt catch buy those now and install them when doing the build the first time. rather then have to drive the roll pins out and install later on.
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
quote: Originally posted by v-town coupe: warhorse if you lived closer id just say head on over and i'll show you how to put it together i have all the roll pin punches and have done enough of these to get you lower completley together in 10-15min. just fyi if you decide you want a different trigger guard or some sort of fancy tactical bolt catch buy those now and install them when doing the build the first time. rather then have to drive the roll pins out and install later on.
i'm looking to get one around feb.. just want to do my homework before i jump in... and if the offer still is there when i get it.. i'll be more than happy to drive up to you.. i don't drink but i can bring some brews for you in exchange for putting lower together..
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
87Fox916
¯
Member # 6399
|
posted
If you want a gun already put together then try lanworldinc.com. You can get one for just under or at 1k. Stag Arms makes good products. Just like everybody else is saying you will need the push button and the 10 round mag which will cost a bit extra. Then you will need it sent to an FFL dealer and they can provide you with a name. FYI-Walmart has a ton of 100 round 223's for 39 dollars everywhere. [ December 27, 2009, 03:46 AM: Message edited by: 95GTConvtACE ]
-------------------- 87 Mustang GT
Posts: 1652 | From: SACRAMENTO | Registered: Jan 2006
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
quote: Originally posted by warhorse58gt: quote: Originally posted by v-town coupe: warhorse if you lived closer id just say head on over and i'll show you how to put it together i have all the roll pin punches and have done enough of these to get you lower completley together in 10-15min. just fyi if you decide you want a different trigger guard or some sort of fancy tactical bolt catch buy those now and install them when doing the build the first time. rather then have to drive the roll pins out and install later on.
i'm looking to get one around feb.. just want to do my homework before i jump in... and if the offer still is there when i get it.. i'll be more than happy to drive up to you.. i don't drink but i can bring some brews for you in exchange for putting lower together..
yeah just let me know we can put it together. it only takes a few minutes. just make sure you get a 10rd mag or smaller and a bullet button or if you end up with a featureless upper you can bring some sort of monsterman grip with you.I'll help you do it and i just want to make sure anything we put together is ca compliant when it leaves my house.
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
war horse what city do you live in i may know of a good shop in your area.
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
quote: Originally posted by v-town coupe: war horse what city do you live in i may know of a good shop in your area.
i'm in stockton... and yeah i want it 100% legal in ca... the only shop that had lowers was, stockton gun exchange.. but all they had was 1 striped lower ($177).. there was another gun shop in town. it had functional bushmaster for 1,100. but it had the fixed clip.. but i'd rather piece mine together,and spend the extra money on shells.
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
there is JK supply in Ione and he is awesome and has a great selection. also there was a little place i checked out when i was working n lodi called:professional fire arms they have weird hours and are a small shop but they had some cool stuff in stock last time i was there and ive heard they have had more stripped lowers in stock lately also may want to take a little trip to J&R sports supply in livermore great guys there and good selection but out of those 3 id go see ryan at jk supply he has worked some great deals and he recently had some complete daniel defense rifles for $1300 ish plus tax and dros and DD rifles are Really nice. if complete is the route your looking for.
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
quote: Originally posted by v-town coupe: there is JK supply in Ione and he is awesome and has a great selection. also there was a little place i checked out when i was working n lodi called:professional fire arms they have weird hours and are a small shop but they had some cool stuff in stock last time i was there and ive heard they have had more stripped lowers in stock lately also may want to take a little trip to J&R sports supply in livermore great guys there and good selection but out of those 3 id go see ryan at jk supply he has worked some great deals and he recently had some complete daniel defense rifles for $1300 ish plus tax and dros and DD rifles are Really nice. if complete is the route your looking for.
i think putting it together myself is going to be the route to go.. i can't see any point in paying extra $300-500.. for the same gun.. besides i'd rather learn to do it myself.. you never know when i might want to go with a more tach gun.. right now i'm going for the m4 look.. and a good shooting base model.. nothing fancy... i can't spend all my money.. still trying to get the single diget time slip... [ December 30, 2009, 02:01 AM: Message edited by: warhorse58gt ]
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|