Author
|
Topic: first time pass in my slow 2v
|
saclve
¯
Member # 13280
|
posted
Now that I have these wider nitto tires on the rear hopefully that helps and was thinking about running a couple gallons of 100 octane unleaded fuel since I have the raised compression from pi swap
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
POWERED BY FORD
¯
Member # 9204
|
posted
Can't wait to see your new times. I say you can get 13.5 easy
Posts: 2204 | Registered: May 2009
| :
|
|
saclve
¯
Member # 13280
|
posted
Fastest I've ran is 14.0@100 .without launching . I think 13.5 is Def possible but just decided to get some longtubes installed soon sI maybe 13.3 once those are installed but only problem is at 100 mph I'm at nearly redline in 4th so what do I do shift to 5th ??
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
SLOW95GTS
¯
Member # 10365
|
posted
Nice run, im doing the same right now. No need to shift w/ 3.73's usually with a 26 in. tire, or 17 in. Wheels you should be at red line by the finish line, like i am.
-------------------- 1995 Mustang GTS 5.0 - "minor mods"
Posts: 1199 | From: East Bay | Registered: Oct 2010
| :
|
|
saclve
¯
Member # 13280
|
posted
I have 4.10 in rear
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
96stang4.6
¯
Member # 9970
|
posted
race gas wont help much unless your car is tuned for it, 91 octane will due
-------------------- 93 chp 88 t top mustang gt 87 coupe IRS swapped 12 mustang gt/cs
Posts: 164 | From: sac | Registered: Apr 2010
| :
|
|
saclve
¯
Member # 13280
|
posted
Yea that's all I've run is 91 until maybe I get cammed
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
MaK_1967v8
¯
Member # 12187
|
posted
quote: Originally posted by saclve: Fastest I've ran is 14.0@100 .without launching . I think 13.5 is Def possible but just decided to get some longtubes installed soon sI maybe 13.3 once those are installed but only problem is at 100 mph I'm at nearly redline in 4th so what do I do shift to 5th ??
Huh? why are you shifting to 5th? you should easily make it down the track using 1st-4th with 4.10s on a PI 4.6
-------------------- 1967 C Code Coupe 2004 Roush Stage 2
Posts: 620 | From: Sacramento, CA | Registered: Jul 2012
| :
|
|
saclve
¯
Member # 13280
|
posted
Never shifted into 5th just scared to let 4th stretch the tach like that seems like it's just sitting at 5800 rpm or something high like that
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
MaK_1967v8
¯
Member # 12187
|
posted
running a 14, you probably wont even redline 4th by the time you're down the track. Don't worry about it. Roll it out there. 5th is an overdrive gear.
-------------------- 1967 C Code Coupe 2004 Roush Stage 2
Posts: 620 | From: Sacramento, CA | Registered: Jul 2012
| :
|
|
saclve
¯
Member # 13280
|
posted
Car could probably easily run a low 13 but I don't have drag radials and can not launch Makimg 60 ft time 2.2 and higher.
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
saclve
¯
Member # 13280
|
posted
Going off idle I went 13.9 @101 with 2.1 60ft and 9.0 1/8th mile no traction when launching at 2500rpm
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
|
saclve
¯
Member # 13280
|
posted
Never purchased any put on set of bbk longtubes want to check compression b4 i buy cams bcus I noticed blow by coming from motor don't want to cash out then have my motor die she feels strong now just needs some slicks
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|
saclve
¯
Member # 13280
|
posted
So I ran a 13.9 @101 and 13.71 @100 trying to see what I can do to get another 1-2 mph out my run or more power thinking about underdrive pulleys , tb and plenum ??
Posts: 276 | From: sacramento | Registered: Nov 2013
| :
|
|